Question about Uniden Cordless Phone
Model 25931 cordless handset speakerphone, one works great the other has no dial tone unless it is on speaker. It rings but you cannot hear the caller.
I have the problem. I think it is because the battery i have in it was a Ni-MH and it should be a Ni-Cd. I am now looking for the right baterry Good luck Frank firstname.lastname@example.org
Posted on Sep 17, 2007
SOURCE: handset has No link to base
I was having the same problem with the same model phone, and fixed the problem by rebooting the phone – unplugging the AC and phone cord from the base station and plugging both back it, then removing and replacing the handset to regenerate the security code.
Posted on Nov 19, 2007
2/29 Have you registered or re-registered the handset?
"No link" can mean handset is not accepting radio wave of base unit. At Mfgr website pull-down operator's manual and look for registration instructions. Some sequence of buttons will create a radio signal from base (have handset off base) then another sequence of buttons on handset will accept radio signal. If handset has "menu" button, try "menu", then "00" (zero zero) then select an accept or "OK" button. Good luck.
Posted on Feb 29, 2008
SOURCE: No dial tone on handset
It may not be registed with the main unit. You may need to register the handset. With my uniden all i have to do is put it in the main base until it says what handset it is (it should be a number).
If you have any questions please dont hesitate to ask
Posted on Dec 02, 2008
Tips for a great answer:
Jun 23, 2009 | Panasonic KX-TG9341T Cordless Phone
Mar 13, 2009 | Uniden Cordless Phone
Jul 17, 2008 | GE 25931 Trio Cordless Phone
May 21, 2008 | GE 25931 Trio Cordless Phone
Jan 28, 2008 | GE 25931 Trio Cordless Phone
Nov 17, 2007 | Xact Communication XG2200 Cordless Phone
Jan 14, 2007 | Xact Communication XG2200 Cordless Phone
Oct 14, 2016 | Uniden Cordless Phone
18 people viewed this question
Usually answered in minutes!