Question about Xerox DocuColor 3535 Copier

2 Answers

Reseting drum cartridge on xerox 3535

Is there a way to reset the drum cartridge on xerox 3535. it looks to be in very good shape, but the life has ran out.

Posted by on

  • Anonymous Feb 12, 2009

    teri pain nooo

  • Vinod G . Sep 24, 2012

    i have 3535 colour - Problem- when compurt gives print to firy , firy take it but printer do not print


2 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Yes I m drincopy from Kosovo i reseting oall drum for xerox

Posted on Nov 30, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Give this Drum Reset Kit a chance. Easy to use just attach cheap and flip switch. Use infinite times to reset the drum at your convenience:

Posted on Oct 27, 2011

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Can Xerox DocuColor 3535 toner ink be used in Xerox WorkCentre 7228?

From experience, I wouldn't do it...
The different series usually have slightly different toner composition, so you may find that your copier will be majorly over-toned or under-toned. by doing that.
I personally wouldn't risk it, and I have been in the industry 24 years...

Oct 26, 2014 | Xerox Printers & Copiers

1 Answer

How to reset xerox m118 drum

Hi, I have a solution to your problem click on the link below which will direct you to a step-by-step guide to fix your problem!
Xerox Workcentre 123 128 Reset Drum Life Free

Aug 26, 2014 | Xerox WorkCentre M118 Black and White...

1 Answer

How to replace the drum of dc 3535

remove drum cartridge outside

remove 2 black cap of drum cartridge

then take a small steel rod enough lenght of that drum and put in that hole appear one side of drum

and press it so that other side nob comes outside

again from second side remove the nob of another side

remove all bearings gear
place a new drum and fit all bearing and gear
reverse procedure from downside to up

Jul 23, 2011 | Xerox DocuColor 3535 Copier

1 Answer

The fuser error light is on and my Xerox XC 1040 copier will not work. There is no error codes displayed

The drum light can be reset via the control panel. Especially if your copies were good before the light came on. The drum unit is the cartridge that is located right next to the toner cartridge. Reset the light using the following reset procedure:
To reset the drum light on just about any Xerox XC or XD series copier press the following key's in sequence and as quickly as possible (with 4 seconds for the first 4 keys)
Press "C" then the far left key (exposure mode) then the "C" key then the far left again.
So in other words C, far left, C, far left
If done correctly the display should go blank.
Then key in 24 as if you were going to make 24 copies.
Now press the "print" button
Now key in 7 as if you were making 7 copies
Now press the print button again.
You should now be getting flashing zero's on the display.
Turn the machine off then on again and your drum light should be gone!
You can usually reset this counter at least once to get twice the life out of your drum unit.
Good Luck and Thank You for using Fixya.

Nov 12, 2010 | Xerox Printers & Copiers

1 Answer

Respected sir i am having docu color 3535. the working condition is excellent. recently I faced a problem "change the drum unit". are there any possibilities to reset the drum counter. with...

Although you can not reset the counter by any buttons. You can replace the chip on the cartridge at a far less price.
Google a business called "the parts drop".
I have done business with them for years. Give them a call, ask for Britt, they will have what you need. They are simply the best people to deal with for Xerox parts. Courteous and honest.
Cant ask for more.
The chip is easy to replace.

Nov 12, 2010 | Xerox DocuColor 3535 Copier

1 Answer

Xerox 3535 ero 004-361


Error code 004-361 means Drum error or Drum motor failure. You'll need to check the drum cartridges, remove the cartridges to check. Now enter DC330 [004-003] and press Start. The Drum Motor will now energize and the drive rotates. If it doesn't then measure voltage between the Drum Motor P/J210-4 (+) and GND (-), it should be +5 VDC is measured. Try measuring the voltage between the Drum Motor. If there is no voltage detected then you'll need to replace Drum Motor (PL 1.1). Hope this helps...


Oct 11, 2010 | Xerox DocuColor 3535 Copier

2 Answers

Xerox dc 3535 consumabel empty what i do for reset the consumable

tell exact word
consumables like ink, C, M,Y,K or what ?

Jul 01, 2010 | Xerox DocuColor 3535 Copier

3 Answers

Xerox XD100 that is showing a code J2

No. The CRUM is integral to the Drum Cartridge. The only way would be to swap CRUM from a cartridge that failed for a reason other that it reached end of life.

Jul 02, 2009 | Xerox WorkCentre XD100 All-In-One Laser...

3 Answers

How do i reset the second bias transfer roller on a Xerox 3535?Thanks, chris

You need a Xerox service laptop to communicate with the beast and reset it, that is what I was told by a Xerox Tech, Nasty I know but no other choice they got you.

Feb 25, 2009 | Xerox DocuColor 3535 Copier

3 Answers

How to reset waster toner bottle full Xerox 3535

Here's what I did.

Emptied the waste toner cartridge. Left it out of the machine. Held the microswitch (located to the right of the optical sensors) in the "cartridge in" position with a paperclip. Printed one document. Inserted the waste toner cartridge. Error now gone!


Aug 27, 2008 | Xerox DocuColor 3535 Copier

Not finding what you are looking for?
Printers & Copiers Logo

Related Topics:

1,042 people viewed this question

Ask a Question

Usually answered in minutes!

Top Xerox Printers & Copiers Experts


Level 1 Expert

185 Answers


Level 2 Expert

110 Answers

Philip Hughes

Level 2 Expert

63 Answers

Are you a Xerox Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides