Question about Fuji Pictrography 3500 Printer

1 Answer

"Specified media does not match media in printer"

Changed paper to gloss when error occured...

Thanks for your help

Posted by on

  • scott_janes Nov 25, 2008

    Using raster plus. Where do I specify paper type? The printer panel shows gloss paper loaded. Did try reprinting job. Thanks

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 65 Answers

You have to specify that you want the job print on glossy paper in order to get rid of this message. You may have to resend the job.

Posted on Nov 25, 2008

  • Maurice Holliday Nov 25, 2008

    There should be an option when you bring up the print screen. It will usually be under printing preferences. If that doesn't work, you may be able to get it to work by labling the paper as plain paper in the machine, but test it first.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Red light of ricoh sp200 is parmanently on


  1. Alert Indicator
    This indicator lights up red when the machine runs out of paper or consumables, when the paper settings do not match the settings specified by the driver, or when other errors occur.
See page 12 on the link below http://data.manualslib.com/pdf3/61/6004/600310-ricoh/sp_200.pdf?97aa7364b3bed27ea4784c2ca038bf32

Mar 02, 2016 | Ricoh Printers & Copiers

1 Answer

Lexmark T644 Drawer 2 Missing error message but drawer 2 is in place. Drawer 2 always has problems pulling form form drawer when printing from drawer 2.


If job prints from the wrong tray or on the wrong paper or specialty media, this is an indication that the operator panel menu settings do not match the media loaded in the tray.

Make sure the Paper Size and Paper Type specified in the printer driver match the paper size and type in the tray.

For further assistance, please contact Lexmark Technical Support

Feb 09, 2012 | Lexmark T644 Laser Printer

1 Answer

We changed the paper type in tray 3 to high gloss and need to change it back to regular paper but we can't remember how.


Open and close the paper tray 3.The tray information screen will be displayed.Select CHANGE SETTING on the touch screen.You should now be able to change your setting.

Oct 20, 2011 | Xerox WorkCentre 7328 Multifunction laser...

1 Answer

I have to clean my printer heads before I print any photo and after I stop awhile. Before I print again I have to clean the heads again because the photos are blurry and lines appear on my photos. I am...


Hi Juliet

EPSON STYLUS 1400 INKJET PRINTER PHOTO PAPER AND PRINTER SETTINGS

Formulating solutions based on remote diagnostics with just the detail in the question to go by is an inevitably imprecise science. We therefore aim to give our suggestions as wide an ambit as possible to cover all possible scenarios, abilities and experience levels. I suppose the best approach to initial FixYa solutions is to see them as an options list from which you can cherry pick the most relevant and practical ones. The Comment Box then provides the opportunity to fine tune the information flowing both ways. An updated picture after implementation of the relevant suggestions and additional background (such as whether the printer printed properly before and what paper choice of print setting changes since then may have caused the problem to first occurr, the remedies you have already tried, the specifications of you computer and its Opreating System) can then lead to more tailored suggestions.

There are many different types of Photo Paper and your Epson Printer has different Print Settings for each type. Matte paper, at the microscopic level, has more surface area than smoother papers and therefore has greater absorptive properties which, in turn, require a larger than usual amount of ink in order to produce an image with good resolution, than is the case for smoother papers. So Matte setting on a less absorbent paper type can cause excess ink issues and the problems you describe. The correct setting for each type of paper is the setting matching what is printed on the packaging of each respective type of paper (fabric, textured, matte, soft gloss, semi-gloss, gloss, high gloss, ultra gloss, premium gloss, etc).

Start > Control Panel > printers and faxes > right click on Epson Stylus 1400 icon > printing preferences > main > select 'Photo' or 'Best Photo' > click on the arrow next to 'Type' to reveal the drop down menu to select each Photo Paper Type you test > Apply > OK > restart printer > test Photo Printing again.

It is, for creative reasons, possible to deliberately use mismatched Photo Papers and Print Settings for artistic effect, but the results are unpredictable and matte settings for smoother, less absorbent papers can cause similar problems to those you describe. My advice to you would be to buy a variety of small packs of different papers to experiment with. Your enhanced aesthetic instincts will help you identify the best paper for the outcome you envisage. As a place to start, please consider examples of potential paper ideas by clicking on or copy/pasting-to-browser the links/URLs below:


http://www.amazon.com/s/ref=nb_sb_noss?url=search-alias%3Daps&field-keywords=satin+photo+paper&x=17&y=13

http://www.amazon.com/s/ref=nb_sb_noss?url=search-alias%3Daps&field-keywords=satin+photo+paper&x=17&y=13#/ref=nb_sb_noss?url=search-alias%3Daps&field-keywords=fabric+photo+paper&rh=i%3Aaps%2Ck%3Afabric+photo+paper

http://www.amazon.com/s/ref=nb_sb_noss?url=search-alias%3Daps&field-keywords=satin+photo+paper&x=17&y=13#/ref=nb_sb_ss_i_0_20?url=search-alias%3Daps&field-keywords=textured+photo+paper&sprefix=textured+photo+paper&rh=i%3Aaps%2Ck%3Atextured+photo+paper

http://www.amazon.com/s/ref=nb_sb_noss?url=search-alias%3Daps&field-keywords=satin+photo+paper&x=17&y=13#/ref=nb_sb_ss_i_0_17?url=search-alias%3Daps&field-keywords=matte+photo+paper&sprefix=matte+photo+paper&rh=i%3Aaps%2Ck%3Amatte+photo+paper

http://www.amazon.com/s/ref=nb_sb_noss?url=search-alias%3Daps&field-keywords=satin+photo+paper&x=17&y=13#/ref=nb_sb_ss_i_0_17?url=search-alias%3Daps&field-keywords=gloss+photo+paper&sprefix=gloss+photo+paper&rh=i%3Aaps%2Ck%3Agloss+photo+paper

http://www.amazon.com/s/ref=nb_sb_noss?url=search-alias%3Daps&field-keywords=satin+photo+paper&x=17&y=13#/ref=nb_sb_ss_i_0_17?url=search-alias%3Daps&field-keywords=soft+gloss+photo+paper&rh=i%3Aaps%2Ck%3Asoft+gloss+photo+paper

So, please just set the printer settings to match each type of paper you trial to be 100% safe but there is also some margin for experimentation. With this in mind, you should be fine.


I hope this helps.

If this Answer goes some way towards helping to resolve your Query, Problem or Fault, please take the time to Rate it. Doing so helps Solution Providers, like me, better understand the needs and the point of view of Askers, like you, and guides us in exploring the best ways to provide the most comprehensive, useful and high quality Responses and Solutions we can. If you need further help, please do not hesitate to post another Question or add a Comment to this Question.
Thanks for using FixYa.

Oct 11, 2011 | Epson Stylus 1400 InkJet Photo Printer

1 Answer

Sir my printer problem is on printer menu write a clearing paper path what is this massage and give me solution.


Thank you contacting FixYa for your printer inquiry.
This error is associated with either a sheet of paper blocking the paper path or a partial piece of paper that blocks path or trips a sensor. The printer will usually throw up a error code 13.XX on the display and the XX is a number that will indicate where in the paper path this error most probably occurred. Just follow the steps for your error on the below chart.
This link will take you to the user guide which will be helpfull identifying components and providing guidelines for most of the helpful hints and things you will need to know about this printer.
http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c00218691/c00218691.pdf
Locate your error on the matrix below and follow the steps. Comment back if you need more help. Thank you again for contacting FixYa.
TF
HP Laserjet Error Codes 0 - 19 Message on printer Display Panel What it means. What to do. 13.XX PAPER JAM [LOCATION] Media is jammed at the specified location (and possibly at other locations). If the message persists after all jams have been cleared, a sensor or sensor lever might be stuck or broken. For all jam messages, do the following: 1. Remove jammed print media from the specified location. Check the entire paper path for other pieces of media in the path. 2. Open and close the top cover to clear the message. 3. Check sensors and flags in the paper path for proper operation. 3.0 PAPER JAM [LOCATION] A non-specific paper jam occurred. 1. Remove jammed media from the specified location. 2. Verify the paper tray is fully closed. 3. Inspect and/or replace the feed and separation rollers. 4. Ensure there is no obstruction in the path, such as a torn piece of paper. 5. Open and close the top cover to clear the message. 6. Check sensors and flags for proper operation. 13.1 PAPER JAM OPEN INPUT TRAYS Paper-delay jam at paperfeed area. 1. Ensure that paper trays are loaded and adjusted properly so media can feed from the tray. It might be necessary to reduce the stack height of media in the tray. 2. Check the input area for obstructions such as media in the path. Also check to see if the registration assembly damaged or unseated. 3. Replace any defective sensors or flags. 4. Verify the media meets the specifications. 5. Check the pickup feed and separation rollers for unusual wear. Replace as needed. 6. Rotate the media in the input tray by 180° and/or turn it over On NX engines this is most likely the fuser flag or the ACPM. The ACPM has a photosensor hard-wired to the back of it. 13.10 PAPER JAM CHECK DUPLEXER Jam at duplexer. 1. Check the duplexer and the rear area of the printer for obstructions or damage. 2. Check the duplexer for proper operation. Replace the duplexer if a sensor is defective. On a 5si, 8000, or 8100 series laserjet a Duplex Jam can be caused by a tray 2 and 3 feed assembly failure. 13.14 For Laserjet 5si. This error is caused by a defective paper control PCA Replace paper control PCA. 13.2 PAPER JAM OPEN INPUT TRAYS Paper-stopped jam at paper-feed area. 1. Check the input area for obstructions such as paper in the path. Also check to see if the registration assembly is damaged or if the transfer roller is out of place. 2. Replace any defective sensors or flags. 3. Ensure the media does not exceed the maximum length. 4. If multiple sheets are feeding, it might be necessary to fan the media and reduce the stack height. Also, replace separation pad. 5. Verify that the fuser is properly installed. On NX engines this is an input jam. 13.20 PAPER JAM CHECK REAR DOOR Media stopped in the paper path during power on or when the top door was closed. 1. Remove all media in the paper path, and then open and close the top cover. 2. If the message persists after all media is removed: Check if media is jammed in the prefeed area. Replace any defective sensors or flags 13.21 DOOR OPEN JAM The top cover was open while printing. 1. Clear the jam and close the top door. 2. If the message persists, check the top door switch for proper operation. 13.5 PAPER JAM CHECK REAR DOOR Paper-delay jam at fuser. 1. Check the transfer roller and small media belt to ensure they are operating and can feed print media. 2. Check the paper path for obstructions at the transfer roller, toner cartridge, paper feed assembly, and fuser. 3. Replace any defective sensors or flags. 4. Turn the media stack over and/ or rotate it by 180° in the input tray. If still persists - replace fuser, then DC controller. 13.6 PAPER JAM CHECK REAR DOOR Paper-stopped jam at fuser. 1. Check the paper path for obstructions at the fuser and output/delivery area. 3. Replace any defective sensors or flags. 13.99 PAPER JAM [LOCATION] A non-specific paper jam occurred. 1. Remove jammed media from the specified location. 2. Verify the paper tray is fully closed. 3. Inspect and/or replace the feed and separation rollers. 4. Ensure there is no obstruction in the path, such as a torn piece of paper. 5. Open and close the top cover to clear the message. 6. Check sensors and flags for proper operation

Jun 09, 2011 | HP LaserJet 4350 Printer

1 Answer

HP 3005dn Printer Tray 1 paper jam error


If message in display panel reads [13.XX PAPER JAM [LOCATION]]Media is jammed at the specified location (and possibly at other locations). If the message persists after all jams have been cleared, a sensor or sensor lever might be stuck or broken.
Soln.
For all jam messages, do the following: 1. Remove jammed print media from the specified location. Check the entire paper path for other pieces of media in the path. 2. Open and close the top cover to clear the message. 3. Check sensors and flags in the paper path for proper operation.

For message 3.0 PAPER JAM [LOCATION]
means
A non-specific paper jam occurred.
Soln
1. Remove jammed media from the specified location. 2. Verify the paper tray is fully closed. 3. Inspect and/or replace the feed and separation rollers. 4. Ensure there is no obstruction in the path, such as a torn piece of paper. 5. Open and close the top cover to clear the message. 6. Check sensors and flags for proper operation.

For more help check yhis site

http://www.printertechs.com/tech/error-codes/error-codes-0-19.php

Nov 26, 2010 | HP LaserJet P3005n Printer

1 Answer

How to fix error 41.3 on a HP P4515 printer. Have checked all paper settings and tray settings.Changed paper pick up rollers also.


Hi

This error means that the media in tray XX doesn't meet the specified standard of the tray. The specified tray is loaded with media that is longer or shorter in the feed direction than the size configured for the tray. Please check the paper size in current tray or touch OK to change the tray.
To resolve this issue Touch OK to display tray size. Reconfigure the size in the tray so that it uses size of media required for the print job. If the message doesn't clear automatically from the control-panel display, turn the MFP off, and then turn the MFP on.

Restart the printer and repeat the above procedure if issue is not resolved.

Daniel Scott

Jun 14, 2010 | HP Printers & Copiers

1 Answer

Gloss or semi gloss paper stuck in fuser


You need to change your setting for media type, and media weight( you can use auto for this setting) but for media type you have several options. Bond, glossy, plain, etc. This setting adjust temperature for the fuser. You can do this at the front panel in menus.

Jul 20, 2009 | Xante Ilumina Digital Color Press Printer

2 Answers

34 incorrect media


34 Incorrect Media message appears if the printer has detected a mismatch between the type of media requested by the user and the type of media actually loaded in the paper tray.

To attempt a resolution for this issue, please do the following:
  1. Press the green GO button on the printer operator panel. Printing will resume, but the printer must go through a POR (Power On Reset) in order to clear the message.
    NOTE: The printer does not automatically reprint the page that generated the error message.
  2. Verify that the media you are using is supported by your printer in terms of size, weight, and input source.
  3. Using the printer operator panel, verify that the type of media loaded in the paper tray matches the Paper Type setting in the Paper Menu. Detailed instructions for navigating through the printer menus and changing the media type setting are provided in the C510 User's Guide.
    • If the media type setting is incorrect and cannot be changed, there may be an issue with the media type sensor. Proceed to step 5.
  4. Using the printer's operator panel, verify that the paper loaded in the paper tray is the size listed under Paper Size in the Paper Menu. Detailed instructions for navigating through the printer menus and changing the paper size setting are provided in the C510 User's Guide.
    • If the paper size changes to an incorrect setting or cannot be changed, it is likely that the paper size guides in either the 250-sheet or the 530-sheet paper tray are not set correctly. Remove the media from the tray and verify the location of the media guides.
  5. Power the printer off and then back on again.
  6. Resend the print job to the printer.
  7. If the error persists, you will need to contact Lexmark Technical Support for assistance. Please obtain the printer serial number before contacting Lexmark. If possible, call from near the printer as this will allow for the most accurate possible diagnosis.
Hope this will help you please let me know if it worked and don't forget to vote..
Cheers

Dec 18, 2007 | Lexmark C510 Laser Printer

Not finding what you are looking for?
Fuji Pictrography 3500 Printer Logo

Related Topics:

79 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fuji Printers & Copiers Experts

isaac johny
isaac johny

Level 3 Expert

796 Answers

Prashant  Sharma
Prashant Sharma

Level 3 Expert

1127 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Fuji Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...