Question about Motorola Mobility H500 Wireless Headset

3 Answers

How to reconfigure the H500 headset with a new phone?

My quite new Motorola SLVR died and my provider sent me a replacement phone. But now my headset will not connect to my new phone (because you pair them the first time you use the headset). Is there a way I could reset my headset so that it could pair with my working phone?

Posted by on

  • 4 more comments 
  • Anonymous Dec 02, 2007

    need to pair h500 with new phone

  • Mejay Dec 16, 2007

    i have a new phone and my blue tooth wont connect to it what should i do????

  • sassy1947 Dec 17, 2007

    I have a new i870 and I cannot connect to my bluetooth

  • laydeeluck Dec 28, 2007

    I was also sent a replacement phone when mine died and now my H500 will not pair witht the replaement phone. Is there a way to reset the earpiece?

  • boutmoney Jun 07, 2008

    well i have a sidekick 3 and the wireless headset wont pair its there some kind of master code or restart butten

  • Anonymous Mar 16, 2014

    headset is paired but will not connect

×

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Turn off your earpiece.Then turn it back on but hold the button until the blue light comes on and stays on.(that puts it in discovery mode) Now go to bluetooth devices in you r phone and search for the device.

Posted on Dec 28, 2007

  • laydeeluck Dec 28, 2007

    Once it finds the device, the code will be 0000.

  • laydeeluck Dec 28, 2007

    The code is 0000.

×

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 18 Answers

When it aske u to pair on ur old fone u were required to enter a code if u nevr enter anything leave the code section blank when pairing with the new fone but if u did enetr a code with the old fone u would need to re-enter that code for the new pairing..........its like a pin # for the headset...so if stolen the person who steal it wont be able to use it unless he has ur code....just a a sim card...lol

Posted on Mar 23, 2007

Ad

What if i forgot the code??????????

Posted on Dec 28, 2007

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I am trying to connect my H500 to my new


Enter '0000' (four zeros) when your phone requests a passkey whilst pairing with your headset.
Hope it works for you.
Cheers! Carlos

May 17, 2010 | Motorola Mobility Universal Bluetooth...

1 Answer

Motorola H500 and a motorola v3x phone searches and finds headset but won't connect


1.Press and hold the Multifunction button in the middle of a boom headset while the headset is closed. The light will glow blue.2.Open the boom microphone and the blue light should remain on. If not, repeat step 1.
3.On the cell phone, press Menu > Settings > Connection > Bluetooth > Handsfree > New Device
4.Select H500 once a connection is detected.
5.The passkey "0000" is now entered to confirm the connection has been made.
6.The cell phone screen will now read "Bluetooth Connection".

Tips:
1.Provided you set the Bluetooth power to "On" after the initial connection has been made, the phone will automatically re-connect to the headset.
2.To set the Bluetooth power on - Press Menu, Select Settings, then Connections, then Bluetooth link, scroll to Setup and select that. Scroll to Power and chose Change. Scroll to On and press Select. The screen should now read "Changed: Power On".
3.Test Your Connection: Close the headset and watch for cell phone to say "Disconnected". Re-open the headset and the phone should be connected automatically and will now display "Bluetooth Connected".

please give good rating if the solution works.
Thanks for using FixYa.

Nov 02, 2008 | Motorola Mobility H350 Wireless Headset

1 Answer

H500 Sends Signal to Speaker Not Its Own Earpiece


hi sir
u better have to do the restore factory settings..
tolls> setting>phone setting>restore factory setting..or other option install.. it restart's but it work's.. thank u sir..

Sep 03, 2008 | Motorola Mobility H500 Wireless Headset

1 Answer

Constant Seeking


maybe faulty now....try a new one and see if it finds that one, if it does then you know you will have to get a new one.

Mar 14, 2008 | Motorola Mobility RAZR V3

3 Answers

How do i connect H500 to my phone


Hey guys. found it. Go to
www.simoncells.com
then go to manuals
than click on the H500 Bluetooth.
It will walk you through step by step its pretty easy..


Or, you can do it easier.
- Press and hold the Power/Call buttom for 6-10 seconds, until there is a steady blue light
- when there is a steady blue light, go to your phone's Menu, then click on Bluetooth, than Handsfree, It will then start locating your bluetooth. In about 3-5 seconds it will pop up as H500.
-Connect to H500, or push Yes to Connect. (which ever way your phone tells you)
-It will then ask for a password. ALL PASSWORDS ARE THE SAME;AND CANNOT BE CHANGED.
- YOUR PASSWORD IS 0000. typle that in.

Congratulations! Your Now Connected.!

Good luck guys.
Any questions, im on here usually every other day

Ed

Feb 18, 2008 | Motorola Mobility H500 Wireless Headset

1 Answer

Heaset Ear Hook is broken


You can't buy a replacement ear piece but you can buy a new H500 for $19.99 US. Not including shipping.
http://www.tigerdirect.com/applications/SearchTools/search.asp?keywords=h500+bluetooth&image12.x=17&image12.y=18
I use the H700 and a few others. Seems most die before they break so why pay more for less.

Oct 07, 2007 | Motorola Mobility Bluetooth Hands Free...

1 Answer

Motorola RAZR V3 problems with a Motorola H350 Bluetooth Headset


I do not provide the user manual, however, function of the H350 is very similar to the H500 and we are providing a link to the H500 user guide. Just copy and paste this link into your browser and Motorola will explain how to connect your Bluetooth Headset. http://telecom.hellodirect.com/eBiz/pdf/cellphoneheadsets/Motorola_H500_Manual.pdf

Aug 23, 2007 | Motorola Mobility V3 Handsfree Headset...

Not finding what you are looking for?
Motorola Mobility H500 Wireless Headset Logo

824 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorola Mobility Radio Communications Experts

Lawrence Oravetz

Level 3 Expert

10314 Answers

Brad Brown

Level 3 Expert

17448 Answers

Dennis

Level 3 Expert

332 Answers

Are you a Motorola Mobility Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...