How can i resolve the problem of epson fx 2175 dot matrix printer.. when i turn on my printer it initialize but after few seconds power goes to rest and it initialize again.. when i remove one head strip, it initialize but with error beeps and all lights flashings too but it doesent rest the power.. alternatively with other head strip it behaves same..
when both head cables are installed it initialize but resets power..
iam really stucked in this problem.. kindly help me in this regard..
thanks
SOURCE: EPSON FX 2175 always printing JL 1284.4 @GJL
sometimes the printer head is locking/stopping at the right side
SOURCE: Setting Paper Size in Epson Fx-1170
Use the personalized paper size, and set the wide an lenght of the paper you are using.
SOURCE: problem in printing character mode report on epson fx 2175
first take printer setting ...... press online botton( paper feed botton i am not sure which one ) and switch on the printer it will print all setting... ckeck any tear off setting is there .... off the option ....fallow the instraction to change any settiing .....
SOURCE: Epson FX 2175 Matrix Printer page skipping"
Its in your settings go to the control panel where the printer is shown as the default printer with the checkmark beside it and right click and click on properties and check there.
300 views
Usually answered in minutes!
×