- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Use the first four radio station preset buttons to enter the code.
1: Push radio preset#1 until first digit of your code appears. 2: Push radio preset#2 until second digit of your code appears. 3: Push radio preset#3 until third digit of your code appears. 4: Push radio preset#4 until fourth digit of your code appears. 5: Push either tape or cd button.
What to do if your radio says OFF instead of CODE (Courtesy of mittech)
If your radio says OFF it means you entered the wrong radio code three times. To get it to say CODE again do the following.
1:Turn the key to on or accessory. 2:Push the power button so that the radio display says OFF. 3:Let the car sit for 1 hour. 4:The radio display will go blank. 5:Turn the radio on and it will say CODE again.
The crossover wires have absolutely nothing to do with your cd player, all you do is wire your crossovers into the speaker slots on the amp and then wire your mid-range speakers and tweaters into the crossovers. All a crossover does is it splits the power from the amp to your mid-range speakers and your tweaters.