- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Manuals can be a pain to find,you might take a look at this,,turbo start page;(cms.rolandus.com/assets/media/pdf/ME25ts.pdf) You have me curious,so ill keep searching.Used to be easy to find a manual for everything.
Hello Clean the lens assembley of the set by inserting a lens cleaning disc into it , and play it at least three times. If it does not help you, the laser pickup unit of the set is faulty and should be replaced with same type and number. The cleanind disc can be bought from electroncic spare part selling shops at your town, and won't cost more. OK.
open the trunk remove the scuff plate that is located on the back part of the trunk closest to you. then pull the carpet back on the side that you are trying to get to and remove the three or four nuts holding the light assembley in. pull the assembley away from the body then disconnect the bulbs from the assembley. thay should just turn and come out socket and all.
not to sure where to buy parts other then from a dealer. i also had this same gun and had the thing happen to me with the plastic assembley if i was you i would just spend the extra money and get Stanley Bostitch guns, or Senco guns, and get ride of the porter cable guns because they are built cheap. but if you must keep this gun you can check www.deltaportercable.com for parts