Question about Kipor Power Generators

2 Answers

I need a 5kW DC generator with -48v output.

My problem is it has to be from Kipor(Alternator can be from any other comany if possible). What are my options?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Please check www.soleadopower.com we supply DC generator for telecom

Posted on Apr 13, 2011

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have 5kW generators that produce -48V DC. The problem is that unless your generator is designed to produce -48V DC it would be difficult to retrofit an existing AC voltage output with a DC output.

Posted on Jul 28, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Kipor KDE16STA3 shows p03 error after 15 min runing and shuts down after 3 sec.The voltage drops to 30,40 whta's happening?


[PDF]DIESEL GENERATING SET

www.kipor.com/upload/spec2011053011590766.pdf
3/KDE16STA3/ ..... P-03 Undervoltage: Indicating voltage higher (lower), the generator will self- braking. P-04 Generator ... KDE16STA3 KDE19STA KDE19STA3.

[PDF]2

www.kipor.com/upload/spec2011061109073968.pdf
P-03. Decrease load less than the related load, turn on the breaker. P-04. Replace the fuse of the same type. Check the circuit and inserter. Replace the starting ...

Oct 31, 2015 | Kipor Power Generators

1 Answer

Why wont my generator generate power?


You need to provide more details than that. I assume that the engine is running. If so and there is not power output which you will have to check for there are a multitude of possible reasons. You could start by a visual check of wiring and connections. I also assume it is a permanent magnet alternator type and not an excited filed type which is an entirely different state of affairs to test etc.Then find the voltage regulator which mayor may not be integral to the alternator depending on make etc. If it is a permanent magnet type of alternator it will surely be an external regulator, Check for AC voltage into it, DC Voltage out of it if it is a rectified to DC system or AC out if it is an AC system, check for a good ground from its case to the engine/frame ground. Identify the stator windings and do a static stator check on it. If the stator and regulator check out good in a permanent magnet type of alternator you probably have simple wiring issues.

Sep 08, 2014 | Power Generators

1 Answer

Coleman 3500 with subaru engine no power to outlets


Hello there.
I'm assuming that engine runs fine. if there's no power output then the AVR or carbon brushes are dead. remove the back cover of the alternator very carefully and look at the center to find the rotor rings and check if the plastic brush holder hasn't melt or heat deformed and make sure the brushes make good contact against the rotor rings. if everything's fine then the AVR is dead. The AVR is a crescent shaped plastic container similar to this one.
http://www.ebay.com/itm/Automatic-Voltage-Regulator-AVR-For-5KW-5-5KW-Single-Phase-Gasoline-Generator-/221461125389
replace it with any similar found on Ebay, just make sure that connectors and cables are similar in shape and number. Regards

Jul 06, 2014 | Husky 3650 Watt Generator with Subaru...

1 Answer

Why do I not have any output?


Possible dirty contact or defective.

Jun 21, 2014 | Kipor 3000 Watt Generator

1 Answer

Generac model pp5000t 5KW generator, new, runs perfect but no output. tried flashing the field but still no output.


There is a technique for energizing the field, as just flashing a brushless will not work.

It involves two series 150 watt lamps between the utility power and the running generator. You can find it with Google.

Mar 22, 2010 | Power Generators

2 Answers

Replacing engine on Powermate 5000W Generator


I would say, yes (given everything bolts up okay), but I wouldn't connect a full 5000-watt load to it.

May 30, 2009 | Coleman Powermate Portable Generator...

Not finding what you are looking for?
Power Generators Logo

Related Topics:

1,115 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kipor Power Generators Experts

jhnolson

Level 3 Expert

643 Answers

joe_jochoa

Level 1 Expert

22 Answers

ray gallant

Level 3 Expert

37587 Answers

Are you a Kipor Power Generator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...