Question about Heating & Cooling

1 Answer

Honeywell FocusPRO TH6110D auto-changeover unavailable

I tried answering your question about whether I used the Install Test, but I am new here and I don't know if it posted.

Yes, I went through the schedule and the Install Test where you test heat, cool and fan. They all work fine and checked out. This thermostat has a disply that offers off, cool and heat like regular thermostats, but it is also supposed to auto-changeover between heat and cool. On the LCD display heat and cool and off are offered, but not Auto for auto-changeover.
The manual mentions that there has to be a 3 degree difference between heat and cool settings and I have it at 72 and 77, so this should not be the problem.
The system has 4 wires and the factory installed a jumper to (Iassume) power both the heat and AC transformers. It was on in the old thermostat so I left it on in this installation.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 96 Answers

Do you still have your setup manual go through the setup functions

Posted on Nov 25, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I program a Honeywell FocusPRO 6000 Thermostat?


You can find the installation set up just goggle the model and put pdf in the search. If you paid the plumber to install it he should come back at no charge if he is not going to and it's been less then 30 days he is probably not a good plumber and could have completely screwed things up so changing settings may or may not solve the problem.

Oct 05, 2014 | Honeywell Focuspro 6000 Prog. Multistage...

1 Answer

Can i use th5320u1001 on 2 stage compressor and 1 stage heat? tom roll , abe service company , bowling green,ky


Hi,
Yes, that t-stat has that capability...

http://www.pexsupply.com/Honeywell-TH5320U1001-The-FocusPRO-Non-Programmable-Digital-Thermostat-Premier-White-4956000-p

If you need the manual to get it set up then check out this tip...

Manual Honeywell How to Find Honeywell Manuals

heatman101

Sep 15, 2010 | Honeywell Electronic Programmable...

1 Answer

Thermostat will not let us program the cooling past 72 we have tried to move the temporary setting also useing the hold temp button and pushing the decrease key, it seem to be locked at 72


you need to get into the installer settings to lower the minimum setpoint. look up your model online and try that. Otherwise you may have an older style auto changeover type t sat in which case you should still look up the manual and reprogram from the installer configs. or try buying a new one

Sep 13, 2009 | Honeywell Programmable Thermostat Heater

1 Answer

Honeywell FocusPRO TH6110D wires came apart and now i dont know how to put it back together/


R red y/y2 yellow ,g green w white w1/o orange if heat pump w2 white if heat pump, c blue or black this common

Jul 12, 2009 | Heating & Cooling

1 Answer

How to work my thermostat


Fan switch should be on auto in the heating mode and on in cooling. Contact the manufactuer on line for a new manual for this thermostat.

Ray

Dec 14, 2008 | Honeywell Electronic Programmable...

1 Answer

Thermostat auto-changeover mode unavailable


when you programed it did you go through all the setup #1-0 ,#3-0 ,#5-5 ,#12-1

Nov 24, 2008 | Honeywell Electronic Programmable...

Not finding what you are looking for?
Heating & Cooling Logo

Related Topics:

299 people viewed this question

Ask a Question

Usually answered in minutes!

Top Heating & Cooling Experts

paulcarew

Level 3 Expert

2364 Answers

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Donni Steen

Level 3 Expert

659 Answers

Are you a Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...