Question about InFocus LP 600 Multimedia Projector

2 Answers

InFocus LP600 Computer Port 2 disabled

How do I enable the Computer 2 Port on my projector? I have switch the primary source to Computer 2 and manually searched for that source but am still getting a "disabled" message. What are my options?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Turn the projector on
go to the SETTINGS menu,
select SOURCES
at the bottom of the SOURCES menu uncheck "Monitor out Enable"

(yes, this is on page 34 of the manual but I'm thinking you don't have the manual handy)

Posted on Dec 12, 2012

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 64 Answers

This manual should take you thru the steps and help troubleshoot. I hope this helps. http://eit.tamu.edu/CostShareArchive/fall04/lp600manual.pdf

Posted on Nov 25, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

4 Answers

HI I WANT SERVICE CODE OF INFOCUS LP600 ASKC175


I am not exactly sure what service code you are searching for, what is happening with the projector? You turn it on and immediately it's looking for a code? Please let me know and I can help

Tim

Sep 13, 2010 | IBM Multimedia Projectors

1 Answer

The infocus LP600 won't power up


make sure the lamp door is engaging the safety switch. manually reset the lamp hours and reflash the software, if that don't work it's most likely the power supply.

May 11, 2010 | InFocus LP 600 Multimedia Projector

2 Answers

Projector does not display laptop screen


Many laptop computers do not automatically turn on their external
video port when a projector is connected. On many laptops, the activation function key is labeled with an icon or the text CRT/LCD.

Try the Function Key with the Icon of a monitor to enable the external video port.

If that does work, look at the settings on the projector using the buttons on the top.

Check the "Default Source"

Default Source toggles among Computer 1 analog, Computer 1 digital, Computer 2, and Video. This determines which source the projector checks first for active video during power-up. Highlight Default Source and click the left or right mouse button to toggle
among the options.

Jan 17, 2009 | InFocus LP70+ Multimedia Projector

1 Answer

Cannot see computer displyed on output of infocus screen shot


Many laptop computers do not automatically turn on their external
video port when a projector is connected. On many laptops, the activation function key is labeled with an icon or the text CRT/LCD.

Try the Function Key with the Icon of a monitor to enable the external video port.

If that does work, look at the settings on the projector using the buttons on the top.

Check the "Default Source"

Default Source toggles among Computer 1 analog, Computer 1 digital, Computer 2, and Video. This determines which source the
projector checks first for active video during power-up. Highlight
Default Source and click the left or right mouse button to toggle
among the options.

Jan 12, 2009 | InFocus LP70+ Multimedia Projector

1 Answer

Infocus lp600 not working


HI-

MAke sure that cables are properly connected, it might be that it is not getting any signal from the source.

Hope this helps

Oct 28, 2008 | InFocus LP 600 Multimedia Projector

1 Answer

Self Shutdown of my Infocus LP600


power supply problem. if it was overheating, it would go into cooldown mode then standby. there is an issue with the power supply, and it needs replacing. it's about $100 from infocus.

Jun 16, 2008 | InFocus LP 600 Multimedia Projector

1 Answer

InFocus LP600


If the counter expired, then the reset is holding both volume keys down for 10+ seconds.

Feb 27, 2008 | InFocus LP 600 Multimedia Projector

1 Answer

Lp600 went dead


i had the same problem with my 2 years old infocus lp600. on the mains section of the power supply board you have 4 100uF/16v and 1 4,7uF/35V electrolyt condenser of a 85 degree type. that means it will work 2000 hours at 85 degree (celsius). since the power supply only switch off the lamp in standby with no fan the power supply get hot- i think about 70 degree. so after two years in stanby it is evident that this condensers loose halve of their capacity - after switch off no new start. changing this condensers with new ones of 105 degree type will solve tis problem. and for the future - no more stanby.

Aug 14, 2007 | InFocus LP 600 Multimedia Projector

1 Answer

Power point conectivity


PowerPoint is a computer program. It has to be running on a PC for it to connect to a projector.

Apr 12, 2007 | InFocus LP 600 Multimedia Projector

Not finding what you are looking for?
InFocus LP 600 Multimedia Projector Logo

Related Topics:

388 people viewed this question

Ask a Question

Usually answered in minutes!

Top InFocus Multimedia Projectors Experts

Juan Carlos Pacheco

Level 1 Expert

36 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

5653 Answers

Are you an InFocus Multimedia Projector Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...