Question about SharpVision XV-Z9000U Multimedia Projector

1 Answer

Left half image has greenish tint, other half fine XV Z9000U

Is there afix for a Sharp XV 9000U which intermittanly shows a green tint on the left side of the image.? Image can turn red as well, but mostly green.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I am having the same issue, did you ever get yours fixed and if so how please?

Shannon

Posted on Aug 17, 2012

6 Suggested Answers

projdoc
  • 2236 Answers

SOURCE: sharp, home projector brought new lamp still see greenish tint &

the light filter on the blue lcd is toasted, thus causing the tint. as for the lamp prompt, you need to reset the lamp timer.

Posted on Aug 04, 2009

projdoc
  • 2236 Answers

SOURCE: XV-Z9000u / The picture is clear great but I have

first, reset the settings to factory default (through the menu). if you still have no red, swap out the cables. also, check to see if there is any broken glass inside the projector. if you have, the colorwheel is broken and needs replacing.

Posted on Oct 13, 2009

Testimonial: "Thanks for the help! "

heathgr
  • 442 Answers

SOURCE: I have replaced the lamp

is the lamp cover on properly

Posted on Apr 03, 2011

Testimonial: "I do not recall a message to replace the bulb. It just did not fire up one day and I assumed it was the bulb. I have tried the power un-plug several "

tech4allmen
  • 666 Answers

SOURCE: I have a Sharp xv-z9000u projector. I recently

While pressing down arrow, right arrow and ENTER on the projector, press POWER ON on the projector.



"LAMP 0000H" is displayed, indicating that the lamp timer is reset

Posted on Jun 04, 2011

heathgr
  • 442 Answers

SOURCE: Sharp xv-z9000u works normally after

If you turn the menu on does it show up properly when the picture is barely visible, or is everything caput.

Posted on Jun 13, 2011

  • 1 Answer

SOURCE: I have a sharp projector xv-z9000u. I replaced the

While holding down ENTER, \/, and >, Press POWER ON.
Page E-48 Operation manual, Step #8.
So you have to hold three buttons at once.

Posted on Sep 11, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Sharp xv-z9000u projector. I recently replaced the lamp; however, I cannot turn the projector on. how do I reset the lamp timer?


While pressing down arrow, right arrow and ENTER on the projector, press POWER ON on the projector.



"LAMP 0000H" is displayed, indicating that the lamp timer is reset

Jun 04, 2011 | SharpVision XV-Z9000U Multimedia Projector

2 Answers

I have a sharp projector xv-z9000u. I replaced the lamp and now I cannot turn on the projector. What should I do?


there may be a reset button some were on the projector you have to look real good, i do know that some projectors when you replace the light bulb you have to push the reset button than it should turn on.

Jun 04, 2011 | SharpVision XV-Z9000U Multimedia Projector

1 Answer

XV-Z9000u / The picture is clear great but I have no red colors?


first, reset the settings to factory default (through the menu). if you still have no red, swap out the cables. also, check to see if there is any broken glass inside the projector. if you have, the colorwheel is broken and needs replacing.

Oct 13, 2009 | SharpVision XV-Z9000U Multimedia Projector

1 Answer

My sharpvison z9000u is not powering up bulb was used less than 1000 hours


Hi There Sounds like a lamp has died. The technical lamp hour spec life is only a manufacturers "up to xxx hours" and not what you will achieve in actual life.
If you want we are able to supply lamps as we ship internationally, @ $US335 for a SharpVision Z9000u Regards Kevin Andreassend http://www.digitaldaytime.com iceavtech@gmail.com +64-9-414 2348

Jun 27, 2009 | SharpVision XV-Z9000U Multimedia Projector

1 Answer

Lamp life over 2000. can't turn on again after replaced


sharp xv z9000u bulb reset
Hold down Enter + down arrow + right arrow and then power on.

Mar 13, 2008 | SharpVision XV-Z9000U Multimedia Projector

5 Answers

Won't power up


I had the same problem after I replaced my lamp. You need to hold down the:

On
Enter
Down Arrow
Right Arrow

simultaneously - this resets the lamp counter. After I did that my projector fired right back up.

Nov 22, 2007 | SharpVision XV-Z9000U Multimedia Projector

1 Answer

Green screen in the middle


Check the Fly-Eye lens and the RGB panels.

May 31, 2007 | Sharp Notevision PG-A10S Multimedia...

Not finding what you are looking for?
SharpVision XV-Z9000U Multimedia Projector Logo

344 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Multimedia Projectors Experts

Electro Med Services...
Electro Med Services...

Level 3 Expert

5653 Answers

kc5mgc

Level 1 Expert

8 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Sharp Multimedia Projector Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...