Question about Car Audio & Video
Just go to the set up menu ( Your screen should say setup at the upper center of your screen ) Then press 5, 4, 3, 2, 1, 0 with your remote control and a second menu will apear, on your left side press the second option and select parking bypass to on.
Posted on Oct 13, 2008
S-Video is a media type that only carries video. Unfortunately the LG unit was designed only to be a self contained surround sound unit. There are only video outputs to the television on this unit. Because of the unit having surround sound capabilities, LG felt that their wasn't a need for audio output. You would need to buy a new DVD player to allow audio from the DVD to your new Yamaha unit. Good Luck!
Posted on Jan 25, 2009
Install the Firmware for the CD/DVD drive. It is located at:
Posted on May 31, 2009
it is supposed to be connected to the parking brake wire of your car. it is designed to be a safety feature to not allow you to view video while driving. you can bypass this feature through the setup menu.
you will need the remote control to do so.
1.turn the radio on and select the setup menu.
2. while in the setup menu, use the remote and press 5-4-3-2-1-0, this should access another service menu.
3. from there, you will see a brake override option.
4. and your done.. hope this helps
Posted on Aug 20, 2009
Tips for a great answer:
Aug 04, 2016 | Cars & Trucks
Dec 09, 2015 | Cars & Trucks
Sep 16, 2011 | Car Audio & Video
Jul 11, 2011 | Car Audio & Video
Mar 17, 2010 | Nextar Car Audio & Video
Jun 29, 2017 | AMP Car Audio & Video
178 people viewed this question
Usually answered in minutes!