Question about Ziff Davis DAVIS DP X16 Multimedia Projector

2 Answers

Davis Cincevision projector help!!!

We have a Davis CineVision projector. Recently, the bulb burned out and once we replaced it we couldn't get the projector to work again. Friends suggested that there is a code to reset the projector. We do not have a manual, or remote, just the projector itself, and are desperately seeking help. Does anyone know where we can obtain an owner's manual or perhaps know what the possible problem is? Help...this $6000 projector is now useless without some help from you! (Davis is out of business now.)

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

Wholesale and retail all brand projectors and its accessories
Posted on August 25, 2011 by maggie258240135
I am Maggie from Yue Yu Electronic and I am in charge of the export business. Considering we are wholesale and retail all brand projectors and its accessories(lamps, ballasts, DMD Chips, LCD panels, color wheels, remote controls, polarizers, light tunnels, filters, burners, main boards, lens, etc.), we will provide customers with high-quality, low-cost products and better services. We have exported projector parts for many years, and sincerely hope that we could establish a long term and best cooperation with you.
If you have a need, please contact us, including your satisfaction! Hope you have a good business year!
Yours Faithfully
Maggie
Yue Yu Electronics

Mobile: 86-0-15302294942
Address: A1501,1508,NO.592Buynow Building, Tianhe Road , Guangzhou China
Web: www.yylamp.com
MSN: maggie258240135
Mail: Maggie2010great@yahoo.cn
Skype: maggie258240135
QQ: 258240135

Posted on Aug 25, 2011

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,237 Answers

Can't help you there, but the projector was also manufactured as a viewsonic litebird PJL1005, if that helps.

Posted on Aug 19, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bulb popped after replacement


100% Original lamp for XV12000
USD150

Have a nice day!
We supply original projector parts: lamp, bulb, Lcd panel, Lens, DMD chip, color wheel,
motherboard, powersupply ... with high quality and competitive price.
Jerry
Lampdeng Limited

Sep 06, 2013 | Sharp BQC-XVZ100005 Projector Lamp for...

1 Answer

My projector's power light is red, but when I click power it won't turn to green (on)


The likeliest problem here may be a burned out or failed projector bulb. Most projectors will fail to power up at all when if the bulb is out. The HD20 user manual does not specify a red light as an error indication option however, generally amber.
User manual .pdf is located here (takes a bit to download for it's size), Projector Status Indicator instructions are located on page 40.
Here on the product page itself, an email to Optima support may be warranted given the red instead of amber error light.
If you had any messages recently indicating your bulb life was nearing it's end, again, this would be my first guess. Certain models of projectors do have a tendency of blowing through bulbs even before any warning message comes up. I had an experience with a certain brand/model that for the last 3 replacements has given only about 1/4 of the stated bulb life, so unfortunately it does happen.

Mar 05, 2011 | Optoma HD20 DLP Projector

1 Answer

I've had my projector for years now and worked perfectly. But now, there's a shadow on the right side of the screen. I cleaned the lenses and there's still a shadow. With my observations, it looks like...


Remove the bulb, look for any obstructions or damage. If you see none. Replace the bulb, usually replacing the bulb also replaces the lens, the frame around the bulb, and other components all at once making it an easy one stop fix for most visual display problems.

Jun 04, 2010 | InFocus ScreenPlay 4805 Multimedia...

1 Answer

I have a Sharp XR-11xc and my bulb recently burned out. I ordered and replaced with a new lamp. It would turn on but no light would be projected. I read up on the subject and tried the reset of the lamp by...


I have the exact same problem. I've only reset the counter once though. It worked great at first, but seems to be getting worse. It's like it tries to start, just doesn't light up (maybe not warm enough???) then retries like 5 times until switching to the red light. Unplug and retry.... and eventually it does come on, and once on, all is ok. Is this just the projector trying to slowly 'break in' the new bulb since it has almost no hours?

Apr 21, 2010 | Sharp XR-11XC DLP Projector

1 Answer

Infocus IN72 - blinking RED light


firdt off, did you reset the lamp counter? did you clean the dust out of the projector? it may be overheating as well. if the lamp looks ok, you may have just blown the ballast. try projector doctor online.

Mar 03, 2010 | InFocus IN72 Multimedia Projector

1 Answer

Replacement bulbs burn out within a month


If you did not purchase the OEM Sony manufactured bulb (model LMP-H200) then you likely acquired a poor quality "after market" lamp. I recently purchased a replacement lamp for my VW60. The list price is $369, I paid $269 from a reputable brick and mortal / on-line retailer.

If you paid substantially less than $269 or bought from an unknown on-line seller, your lamp is likely the problem. Note I have seen some shady on-line sellers (with "electric" in their name) sell knock of bulbs for the same price as the OEM.

Hope this helps.

Jan 19, 2010 | Sony BRAVIA SXRD VPL-VW60 LCD Projector

1 Answer

Infocus x2, the bulb melts the small square lens even w/ fan on


either the ballast is bad and is sending too much current to the lamp, the lamps are a cheap knockoff, the thermal fuse is altered, and/or one of the fans aren't working.

Jun 14, 2009 | Optoma EzPro 738 Multimedia Projector

1 Answer

Projector image burn (retention)


first off, make sure you got the right lamp and it's from sharp, not a "lamp store". the quality varies. it could be burning hotter than it's designed for. second, you may need to reset the setting to factory default (through the menu options). third, you may need flash upgrade. you'll need to contact a sharp service center for that.

Mar 28, 2009 | Sharp Projector lamp Projector Lamp

1 Answer

Flickering Picture


Funky coulours usually means the vga cable is bad. Try a different cable.

Feb 17, 2008 | Ziff Davis DAVIS DP X16 Multimedia...

Not finding what you are looking for?
Ziff Davis DAVIS DP X16 Multimedia Projector Logo

239 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ziff Davis Office Equipment & Supplies Experts

k24674

Level 3 Expert

8080 Answers

jasbo
jasbo

Level 3 Expert

2237 Answers

Marvin
Marvin

Level 3 Expert

82322 Answers

Are you a Ziff Davis Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...