Question about Panasonic SC-HT800V System
The problem started with an error of no disc when we hit play for the cd. After removing the cover, it seamed to be intermediate, works, then it doesn't spin up the cd.While I had the cover off, I checked the VCR and put a tape in. It fed in, but the mechanism wouldn't feed the tape around the head. Turns out the pin was broken on one of the arms,Arter repairing that, it accepts the tape, feeds, and ejects properly, but has a error code of F04 now. You can turn it on, it activates the vcr and starts to spin up, with no tape,then after a few seconds shuts down with the error code. Any help would be great,
F61 is an output stage error being reported.
Check the leafs for short circuits.
If possible swap the sub. If its neither of these... Sorry its engineer time
Posted on Jun 22, 2009
SOURCE: i hooked up the Panasonic
Look at Page 12 if your TV only has RF coaxial antenna input...
Add in the Video cable (included) if the TV has an input for it and you'll be able to manage the SA-HT800 through the TV.
Make all the other necessary selections prescribed in the manual.
Posted on Jan 23, 2011
Tips for a great answer:
Jan 07, 2017 | Marantz SR6006 Home theater receiver...
Jan 07, 2017 | Sony Audio Players & Recorders
Jan 07, 2017 | Sharper Image Audio Players & Recorders
Dec 26, 2014 | Audio Players & Recorders
Oct 14, 2014 | Audio Players & Recorders
Aug 22, 2014 | Audio Players & Recorders
Jun 14, 2014 | Audio Players & Recorders
Mar 23, 2014 | Audio Players & Recorders
Mar 18, 2014 | Antec BXR-100 Gry Audio...
Mar 03, 2008 | Bose Wave Radio
54 people viewed this question
Usually answered in minutes!