Question about Logitech X-530 Computer Speakers
While moving my computer desk to paint, the misses accidentally dumped the right-front speaker on the floor, face-down. This resulted in the volume control (pot) breaking off, rendering the set useless. The system is out of warranty, so I opened it up to see if I could repair. I located the part but cannot find a US supplier to purchse from. Any help would be appreciated! http://www.globalsources.com/gsol/I/Rotary-potentiometer/p/sm/1002001606.htm
Can you explain in alittle more detail how you made the connections?
Posted on Jun 05, 2010
Exactly the same thing happened to me. After scouring the web with no luck I opted for soldering the 6 contectors on the board.
Posted on May 06, 2008
Hi. Just wan't to know if someone found the damn part. While painting my basement, i did the exact same thing than Brazen and, the volume control poped in. I need this part but, I am not able to find it anywhere. Even the Delta company, wich I sended an e-mail to their sales service dosen't answer any of my e-mails.
Posted on Sep 14, 2007
Hi, ive had the same problem since some time last year, logitech has been useless to fix it as theyve stopped selling individual parts up until recently, if you break any ground on the issue keep me posted on email@example.com
Posted on Jan 09, 2007
Tips for a great answer:
Apr 15, 2012 | Altec Lansing ACS 45.1 Computer Speakers
1. Connect the black plug of the rear right speaker into the black plug on the subwoofer.
2. Connect the yellow plug on the rear left speaker into the yellow input on the subwoofer.
3. Connect the red plug of the front center speaker into the red input on the subwoofer.
4. Connect the white plug of the front left speaker into the white input on the subwoofer.
5. Connect the d-sub connector plug from the front right speaker into the d-plug connector on the subwoofer.
6. Connect the green, black and orange input to the matching plugs on your computer. If you have a four-channel sound card, connect the green plug from the input audio cable to the front plug of the card and the black plug to the rear plug. Do not connect the orange input. If you are using a two-channel sound card, connect the green plug from the input audio cable to the "Line Out" jack on the sound card. Do not connect the green and orange plug.
7. Plug the subwoofer power chord into the electrical power outlet.
8. Place your subwoofer on ground around your computer desk. Position the front center speaker on top of your computer monitor.
9. Place the left and right front speakers on the sides of the monitor. Position the left and right rear speakers behind you, making sure they are pointing toward the front left and right speakers.
10. needs to support 5.1 surround. Normally, more than three sockets for sound indicates that it does. Then you need to use the software that comes with the sound hardware to configure it for 5.1 - Default will be 2.1 or just 2.
Check the control panel out. This is a lot easier under Windows 7.- Here you can access what you need via the speaker icon on the system tray (right click)
There is NO problem with your OS or hardware, this is pretty standard...
hope this will help you solve your problem.
Jul 18, 2011 | Logitech X-530 Computer Speakers
Feb 24, 2011 | Dell 5650 Computer Speakers
May 22, 2010 | Creative Labs SBS 15 Computer Speakers
Sep 13, 2009 | Logitech X-540 Computer Speakers
Feb 05, 2008 | Logitech Z-2300 Computer Speakers
Dec 12, 2007 | Logitech X-530 Computer Speakers
1,690 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: