Question about KitchenAid KGRC608LSS Gas Kitchen Range
When i turn oven on bake, roast or self cleaning stay in (low) it dont heat up, only works on broil.
Shaffy, When baking only the bake element should heat. When broiling only the broil element (upper) should heat. Your oven is a Kitchenaid, you have a 5 year warranty on any electronic element or control board. You may have a temperature sensor that is not working right. The oven just might need to be calibrated, the instructions would be in your owners manual. Your bake element might be failing, it would have to be ohmed out. You also need to verify that the bake element is getting 240V. when turned on. Catriver...post back
Posted on Sep 07, 2006
if this cooker is fitted with a clock check that it is not set to delay start mode(auto) if it is reset clock and this will resolve problem
Posted on Jul 28, 2007
SOURCE: Broiler will work, but oven wont
Could be the bake igniter is bad and broil igniter is still good. may need to replace the bake igniter you will need a complete model number off range to determine the part number of the igniteryou may need.
Posted on Jan 07, 2009
Happens alot dont feel bad , self clean mode runs the elements at 500 deg. to cook off everything possible , what happens is the cabinet gets to hot and heats saftey temp. fuses until they go out and they are not resetable. they are always located in different areas of ranges but usaully in the back. you can ohm them out to check them if you have a meter.let me know if you have any other questions.
Posted on Apr 14, 2009
Solution #3 was very helpful. Took off the back panel and found the small black fuse. Removed the fuse and joined the two black wires, oven now turns on and oven door opens. Don't think it would be to safe to leave like this but going to get the part and put the fuse back in myself. Very easy to fix (just a million screws) so save yourself the expensive service charge!!!!
Posted on Apr 14, 2010
Find the bake ignitor (you may need to remove bottom drawer or oven cavity floor to get to the ignitor). Turn on the bake. If the bake ignitor comes on (starts glowing after a few seconds) - check the amperage on the bake ignitor wires when it's on. If the ignitor is a round style - amperage should be 2.5-3A, if the ignitor is rectangular - 3 - 3.6A. If less than 2.5A or 3A respectively - replace ignitor. If the ignitor does not come on - check the voltage on the ignitor, should be the line voltage 110-120v AC. If there is a line voltage on the ignitor and it's not coming on - replace.
Ignitor part numbers for round style ones: 4342528, WB2X9154, SGR403, 5304401265;
rectangular styles: 12400035, WB13K21, WB2X9998, SGR412, NR020, 5303935066, 814269, 9753108.
Ignitors of the same shape (i.e. rectangular) are interchangeable, if you can splice the wires.
Posted on Jul 15, 2010
Tips for a great answer:
Dec 06, 2014 | Hotpoint Kitchen Ranges
Mar 29, 2013 | Kenmore Kitchen Ranges
Feb 08, 2011 | Electrolux E36DF76PS Dual Fuel (Electric...
Apr 24, 2010 | GE Profile 30" Self-Cleaning Freestanding...
Dec 23, 2009 | Amana AGR5735QDS Gas Kitchen Range
Jan 07, 2009 | KitchenAid KGST307 Gas Kitchen Range
Oct 16, 2008 | Kitchen Ranges
Feb 14, 2008 | GE Profile JGS968 Gas Kitchen Range
Feb 02, 2008 | GE Spectra JBP78 Electric Kitchen Range
Apr 08, 2014 | KitchenAid KGRC608LSS Gas Kitchen Range
32 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: