Question about Jensen CM9521 CD / Cassette Player

Open Question

Beep noise on jenson cm9521

Every time i press a button my cd player it beeps really loud. How do i turn it off ????

Posted by on

1 Suggested Answer

SOURCE: Setting clock

Turn the power on. Push and hold the DISP button. Then use the volume button to change the time.

Posted on Nov 10, 2007

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I turn off the beeping noise on the Electrolux 7kg Time Manager washing machine the 5kg Electrolux Sensor Dryer? The beeping noises indicating a cycle has finished are very loud. Please help!


The acoustic signals operate when:
• The programme is completed.
• The appliance has a malfunction.
To deactivate/activate the acoustic signals, press "Drying level" and "Prewash" button at the same time for 6 seconds.
If you deactivate the acoustic signals, they continue operate when the appliance has a malfunction.

Dado

Mar 06, 2016 | Electrolux Washing Machines

1 Answer

The pet itself is emitting a loud beeping noise and wont move or respond to button presses


Take it back to the store where you got it and get them to either fix it or replace it.

Oct 16, 2014 | Toys

1 Answer

Beeping noise start


It sounds like a graphics problem but try taking your ram out and re seating it and the same with your hard drive this may cause beeps too

Jan 22, 2014 | Acer Aspire 5733z-4851

1 Answer

It is beeping "Error" with 5 beeps


5 beep error means that the waste ink tank is full. You can reset the counter to make it print by doing the following: You have to be exact. If you make a mistake in any of it, just go back to the beginning and start it all over.

1.Unplug the power cord from the printer

2.Hold down BOTH the POWER and RESUME button at the same time and then plug the power cord back in. Keep holding down the buttons until the printer finishes its powering up noises.

3.After the printer is quiet, release the POWER and RESUME buttons. Then hold down the RESUME and CARTRIDGE buttons at the same time with one hand, and press the POWER button with the other. KEEP HOLDING DOWN the RESUME and CARTRIDGE buttons until you hear 2 beeps. They will come quickly together and one beep will be longer than the other. Listen carefully, as they are not very loud.

4. Once you hear the 2 beeps, release both buttons.

5. After both buttons have been released, then press the CARTRIDGE button 15 times. You will hear a beep each time it's pressed.

6. After you finish pressing the cartridge button 15 times, then press the RESUME button one time. The printer will beep and shut off.

7. Turn the printer back on by pressing the POWER button. The printer will work fine now. The waste ink will have been reset to 50% full.

Sep 29, 2009 | Canon BJC-85 InkJet Printer

1 Answer

Want to turn off the annoying beeping sound every time i push a button on the unit, remote or adjust the volume


Turn the unit off by pressing and holding the volume button till it powers down (NOT VIA THE IGNITION SWITCH!) Once off, press and hold the fuction button (located in the top left hand corner near the volume dial) until unit lights up again and a menu appears, near the end of that menu you can change the beep noises to off like volume or when ignition is off but unfortunatly you cannot change the beep for changing track.

Jun 27, 2009 | Pioneer DEH-P6800MP CD Player

1 Answer

2 questions


Hold down the Display/Menu function button (one of those three buttons on the left of the unit) for about 3-4 seconds until the display reads "t set". When this appears, push the track forward button once (>>|) so the display reads "beep"; now press the play pause button (>||) once. The display will now say "on", push the track forward button (>>|) once to make it read "off"; now push the stop play button. You're done. Enjoy the silence.

Mar 14, 2008 | Sony Walkman D-EJ100 Personal CD Player

1 Answer

Eclipse cd3402


email me at memail0@yahoo.com i'll send you the manual I scanned into my computer as for the beep I believe all you have to do is press function then 6

Jan 30, 2008 | Eclipse CD3422 CD Player

1 Answer

Setting clock


Turn the power on. Push and hold the DISP button. Then use the volume button to change the time.

Nov 06, 2007 | Jensen CM9521 CD / Cassette Player

Not finding what you are looking for?
Jensen CM9521 CD / Cassette Player Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jensen Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4807 Answers

Iron
Iron

Level 3 Expert

3018 Answers

The Knight
The Knight

Level 3 Expert

72650 Answers

Are you a Jensen Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...