Question about HP LaserJet 1600 Printer

1 Answer

Hp color laserjet 1600 copies have a blurred image

The printer just started making color copies with the images all blurred but most of the black and white print is find just the color prints and color letters comd out with double , like blurred image

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 217 Answers

This sounds like a registration problem.

Use the menu (on the printer) to print antest page AND a configuration/information page.

Look (critically) at the alignment of the seperate coloure Yellow Magenta Cyan. You will probably find that these are out of aligmnent across the page.

The cause of this, is that the printer can't perform a calibration properly (printer probably takes a long time when calibrating too) and is usually down to failure of one of the sensors on the transfer belt.

Sometimes you can clean these and solve the problem, but often is a failure of the component itself. Thes are NOT available as a spare part, and the repair to correct this would need a replacement transfer belt.

Transfer belt replacement in this printer is quite an involved task, though it is within the capabilities of someone with reasonable mechanical aptitude.

Posted on Apr 05, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My hp color laserjet 1600 leaves blue streaks on all the copies how do i clean the unit to stop this?


please refer to the link below. I have read up on the cleaning sheets mentioned above and it seems that they either work or they thoroughly jam up your printer


HP LaserJet 1600 Printer Print Quality Defects

Sep 17, 2014 | HP Color LaserJet 1600

1 Answer

When I make a copy (black and white) half of the paper (length) comes out black


Your imaging unit may need to be replaced. Try changing the toner first. If the issue continues then it's the imaging unit.

Sep 05, 2014 | HP Color LaserJet 2840 All-in-One...

1 Answer

My hp CLJ 1600 misaligment colors black go left yellow and cyan are ok and magenta goes right. I try calibration no effect


Hi bojan,
you have to clean the image mirrors you can find a how to guide on hp's web site titled "fading red tones on color laserjet2600' process takes about 30mins to do.In Case You Still face Problem and Need Online Assistance Then Please Follow Us For On :
HP Printer Support

Feb 26, 2014 | HP Hewlett Packard LaserJet 1600 Printer

1 Answer

Hp laserjet 9500 is showing error 59.6k. and asking for restar.after re start error is same pls solve this issue


59.6K is a problem with the black image drum.
Take the black cartridge out of the printer. Shake it, reinstall it. Power cycle the printer. If the error comes back, remove the black image drum and reseat it. The image drums(one for each color) sit below the toner cartridges.
If the error still comes back a tech is going to have to look at the printer.

Apr 04, 2011 | HP LaserJet 9500hdn Printer

1 Answer

�Hp laserjet 1600 red color print out very low (new cartridge)


- the problem might be with the laser/scanner assembly of the printer, it is probably dirty

- http://www.formyfriendswithmacs.com/images/don-thompson-2605dn.pdf

- refer to an HP Authorized Service Provider to solve the problem

Aug 01, 2010 | HP LaserJet 1600 Printer

2 Answers

HP 1600 Colour laserjet Double image


Colour registration problem (some printer loose their registration from time to time).

There will be an option somewhere in the menu system of the printer, or the HP 'Toolbox' to correct this.

Apr 04, 2009 | HP Color LaserJet 2600n Printer

1 Answer

Scanned pictures are black and white


if the unit makes color copies correctly, the scanner is working correctly, the application you are scanning to sets the size, resolution, color/b&w, etc. you will need to enter into the application and set it for color.

if u have any ?'s let us know, we will Fix Ya.

clarkco

Feb 06, 2009 | HP LaserJet 3050 All-In-One Printer

1 Answer

Double images from printer


This is normally caused by a defective toner cartridge

Sep 03, 2008 | HP Color LaserJet 2600n Printer

Not finding what you are looking for?
HP LaserJet 1600 Printer Logo

1,316 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...