Question about Xerox WorkCentre M123 Copier

1 Answer

We have four black dots that appear on the top of all printed doc

We are haveing four black dots appear on the top of the pages when we print from a computer. When we make a copy, they are on the bottom. Do I need the guys to come clean it?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 19 Answers

If you still have a contract yes of course have a technician come fix the machine sounds like a bad drum, but you should have the experts investigate this, if it is in the same location each time you print and copy, try changing your drum cartridge other than that call Xerox.

Posted on Nov 24, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Consistent dots down print


Try to print clean page ,
Print a cleaning page During the printing process, paper, toner, and dust particles can accumulate inside the printer and can cause print quality issues such as toner specks or spatter, smears, streaks, lines or repeating marks. Follow these steps to clean the printer's paper path.
  1. Load copier-grade paper (not bond, heavy, or rough paper).
  2. On the printer's control panel, touch the Menu button.
  3. Touch Configure Device .
  4. Touch Print Quality .
  5. Touch Process Cleaning Page .
A Cleaning message appears on the printer control panel display while the cleaning is taking place. The cleaning process takes a few minutes to complete. Do not turn the printer off until the cleaning process has finished. A page will be printed when the task is complete. Discard the page. You might need to repeat the cleaning process to thoroughly clean the printer. Print a few more pages to see if the problem is resolved.

Mar 20, 2013 | HP LaserJet 5550DN Printer

1 Answer

Printer is printing with horizontal blank lines


you did not indicate machine or how you are printing.

1- printing from glass or doc feeder?
did you check the small scanning glass on left side?
usually if there is a dot (pen dot or similar) it will come out as a line on docs, this is because the paper is moving while scanning, so it now sees the dot a s a line. Line up the paper w the glass you should see where the problem is comong from.

Sep 06, 2012 | Printers & Copiers

1 Answer

Printer will not print entire document. If I have a 46 page doc, the printer only prints half. I enter the rest of the doc, and it prints maybe four pages then stops again.


Try printing pages 1 through 25, let printer cool down, print pages 26-46. I'm, thinking it's a print head overtemp problem. If the second printing will not do the complete 26 to end, let the printer set for a longer time to cool off and try again.

Sep 21, 2009 | Printers & Copiers

1 Answer

My printer has just stopped mid printing, status light is red and the light under the black dot is red suggesting the black toner is the problem. The print on last page printed didn't appear faded and I...


yhe problem is that you exceed the amount off alow data go to printer options and select print from computer (it will be a lot slower) but you will solve your problem

Jul 28, 2009 | Samsung CLP 300 Laser Printer

1 Answer

Brother9440 black dots appearing in line close to middle


it is problem drum spot open ypur printer drum unite and chack it or buy new one

Jul 23, 2009 | Brother MFC-9440CN Laser Printer

3 Answers

MP120 producing black dots on page when printing


hi,
CANON PIXMA MP160 All-In-One InkJet Printer
has few common problems. Such as Driver CD lost, Scanner does not work, Connection problem etc. For find all these software solution just click here....
75aba9d.jpg3f22050.jpg

http://www.canon.com/printer/prob676ijt65/solution

prito-i-11

Apr 23, 2009 | Canon PIXMA MP160 All-In-One InkJet...

1 Answer

Solution for "I have a Epson Aculaser c1100 and four coloured dots have appeared when printing. These dots are approximately 5cms from the left side of the page and print in a small vertical group. Each...


The four coloured dots are what is known in the trade as "Traffic Lights". They happen when the photocuductor (PCU) drum gets scratched. If you do a black only print you will only get a black dot, if you do a print with some colour in it you will get all four dots repeated at 150.41mm (PCU drum circumference) intervals. The best answer would be to replace the PCU but it is expensive. The alternative is to take out the PCU, find the scratch and try to polish it out with a very soft cloth. This will only work on the lightest of scratches. Be very careful not to scratch the drum further and avoid shining any bright light on it as it will damage the photo-sensitive surface (normal ambient light is OK).

Apr 11, 2009 | Epson Aculaser C1100 Printer

1 Answer

Hp 1320 wont print


i think you might consider checking the toner on your printer, i.e. replace the cartridge...

hope this helps

Apr 09, 2008 | HP LaserJet 1320 Printer

1 Answer

Coloured dots


Maintenance - BTR Adj - Plain 1 - 5 to 8

Feb 15, 2008 | Dell 3000cn Laser Printer

Not finding what you are looking for?
Xerox WorkCentre M123 Copier Logo

Related Topics:

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top Xerox Printers & Copiers Experts

Whit
Whit

Level 1 Expert

185 Answers

iteminconline

Level 2 Expert

110 Answers

Philip Hughes

Level 2 Expert

63 Answers

Are you a Xerox Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...