Question about Office Equipment & Supplies
First turn power off, there are 2 switches. One on the side of the lcd screen and the other is located on the lower right front side. Then unplug from the wall outlet!!!
Now open the r side vertical transport door( note if the fuser unit is hot wait aprox. 30 minutes too cool down) remove the 2 silver screws which are directly on the fuser unit ( use a magnetic tip screw driver, this will make it easier) gripit with both hands to avoid letting the fusing unit fall down.When reinstalling the fusing unit,
be sure to press the fusing unit into
the machine until the surfaces of the gear mesh are seated ok.( there is a green knob to the right that you can turn whch will allow the gears to rotate.
next step is to reinstall the silver screws, and close the transport door. Now you can plug the power cord back in to the wall. and turn on the power switches. Note the fuser counter will automatically reset itself to 0 ( that is if you installed a new Fuser unit.) There might be a funny smell for a couple of hours due to the new unit installed fuser. Good Luck
Posted on Nov 26, 2008
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Mar 15, 2017 | Konica Minolta Office Equipment & Supplies
Nov 29, 2015 | Cars & Trucks
Jun 20, 2015 | Konica Minolta Bizhub C550
Sep 06, 2014 | Konica Minolta Bizhub C550
Jun 26, 2014 | Konica Minolta Bizhub C550
Jan 08, 2014 | Konica Minolta bizhub Office Equipment &...
Jun 05, 2010 | Office Equipment & Supplies
Jan 12, 2009 | Konica Minolta bizhub 350 All-In-One Laser...
141 people viewed this question
Usually answered in minutes!