Question about Sony BDP-S300 Blu-Ray Disc Player

2 Answers

Display says "LOCKED", won't eject disk, all other functions work. Need unlock procedure.

I think we have accidentally put the Sony DVP-S330 DVD player into a dealer lock setting. The disk that is in the player now plays fine, and all functions work, but when we try the Open button the display reads "LOCKED" and the drawer will not open. The owner's manual and the Sony web site only say to check with the dealer or repair center when this happens. From reading here and at other sites, I think we are stuck in a dealer lock setting, which allows a dealer to put the machine on display with a disk playing and prevent customers in the store from removing the disk. I've tried unplugging the machine and leaving it unplugged for 15 minutes. I've tried holding Open & Power & Return all at once, and a few other key combinations, but nothing has worked yet. display says locked, drawer won't open

Posted by on

  • scorpioTO Nov 24, 2008

    In this instance, there is no disk in the drive, or at least the player says " no disc". I did try the solution posted here, as well as one that the Call Centre at Sony Canada suggested, which was:

    hold down Open+Power+Stop at the same time, it also did not open the drawer. Mine was the display model at the store, the only one remaining. I'm not sure if it was programmed to lock so that customers wouldn't steal the DVD or not. Any ideas?

  • Lalit Varadpande
    Lalit Varadpande May 11, 2010

    i was doing a google for your problem and found a solution here

    its a very similar post as yours..and i really dont know if the answer mentioned there will help..please do ask the other experts..regards!

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Uplug then replug then press eject

Posted on Oct 05, 2011

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

There is a switch on teh back that will unlock it. Look in the manual for lock and unlock

Posted on Dec 23, 2009

2 Suggested Answers

  • 1 Answer

SOURCE: Display says "LOCKED", won't eject disk, all other functions work. Need unlock procedure.

How I got my DVD from ”lock” condition

My DVD (Panasonic m: DMR-ES10) had gone to ”locked” condition without any warning.

Perhaps the reason was that I transfered the machine when it was on and recording was going…

Guidebook didn´t help to resolve the problem, neither Internet. Finally I managed to solve the promlem . This is how i did step by step:

1) Power on
2) Hello
3) read
4) no disc
5) functions
6) to others
7) setup
8) select down arrow
9) disc
10) select right arrow
11) setings for playback
12) enter
13) ratings (level8)
14) enter
15) No limit
16) enter
17) ”The Recorder is now unlocked” (picture of open lock)
18) enter
19) return
20) return

After this DVD works normally.

Jalmari

Posted on Dec 13, 2007

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Do you have a 5 didget code for a Sony davdx150 home theater 5 disc cd dvd combo 5 Changer with the rca rcrn04gr universal remote? Thanks.


Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. The site has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
Programming Notes
• If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote.
• Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality.
This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device.
Search the site by type in the "brand name" to your device; to which you want set-up codes; in the "Search box at the top right of the display window" to get gathered related posts.

Jan 13, 2017 | Sony Televison & Video

2 Answers

Do you by chance have a 5 didget code for Sony davdx150 dvd home theatre with an rca rcrn04gr universal remote? Thanks


Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. The site has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://homenol.blogspot.com/
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
Programming Notes
• If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote.
• Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality.
This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device.
Search the site by type in the "brand name" to your device; to which you want set-up codes; in the "Search box at the top right of the display window" to get gathered related posts.

Jan 13, 2017 | Sony Televison & Video

2 Answers

I need the remote code for a logik dvd player model dv 9100hd


Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. The site has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
Programming Notes
• If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote.
• Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality.
This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device.
Search the site by type in the "brand name" to your device; to which you want set-up codes; in the "Search box at the top right of the display window" to get gathered related posts.

Jan 12, 2017 | Televison & Video

2 Answers

I want my URC-383 to control my Sony DVD Player. What do i do?


You can use code search on the remote to find something that can handle some or all functions of your Sony DVD player. If a search through all codes stored in the remote fails, you may have to try a different universal remote. All universal remotes do not store all possible codes.

Jan 12, 2017 | Sony Televison & Video

1 Answer

Sony 5-disk carousel player will not open. Model DVP-NC685V.


Disc loading mechanism fault. Might be due to a broken loading belt, or broken gear wheel/s. You have to take the mechanism out from the device for repair, and it is somewhat skilled work. Contact any service technician to get this set repaired. If you wish to get some details; visit the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/

Jan 10, 2017 | Sony Televison & Video

1 Answer

How to eject a DVD disc stock inside of Samsung blue ray DVD player does not have DVD tray


There are many reasons for this fault. Visit the site linked below for more information. Type in the brand name of the device in the search box at the top of the display window to get gathered all the related posts. http://electronicshelponline.blogspot.com/

Jan 08, 2017 | Samsung Televison & Video

1 Answer

My factory DVD player will except disc the ejects it


If I understand your rather cryptic post correctly...

This very well could be a Blue-Ray disk loaded into a
non-Blue-Ray capable DVD player. Your car player's capabilities MUST match the disc, otherwise, the disc won't play.

I've run into this very same problem with my home DVD players. Which both are non-Blue-Ray capable, but I was able to verify the Blue-Ray discs on my PC.

Jan 02, 2015 | Televison & Video

1 Answer

DVD player wont eject dicks or play just say's disc error


You need to insert dicks into the DVD player, also, once it ejects the dicks, you should wait 20 minutes or so before attempting to eject more dicks.

Jun 26, 2012 | Televison & Video

6 Answers

Lock message


Hi!
My DMR-ES10 appears since last month, the same message, and lets myself crazy!


Today, after a desperate try, pressing the buttons, I found the solution:

Simple press the POWER BUTTON and STOP BUTTON of the unit for a few seconds...

VOILá: The UNLOCK message appears in the display and the unit return to operate without the lock message !!!

For Lock again, press the same buttons at same way until appears the Lock message in the display.

This is an undocumented command...

I hope to help you!

Mar 25, 2008 | Panasonic DMR-ES10 DVD Recorder

Not finding what you are looking for?
Sony BDP-S300 Blu-Ray Disc Player Logo

4,872 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

kakima

Level 3 Expert

98816 Answers

The Knight
The Knight

Level 3 Expert

69795 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...