Question about Office Equipment & Supplies

3 Answers

Xerox 3100 mfp error code (HSYNC)

Replaced fuser, power supply, and main board. there was a low temp issue. replacing the main board fixed the low temp issue, but now i'm getting a HSYNC error code.

Posted by on

  • 1 more comment 
  • Anonymous Mar 17, 2009

    I have one Xerox 3100MFP printer showing the same "Printer error Fuser temp" I have replaced fuser but same

  • Anonymous May 18, 2009

    xerox 3100 mfp error code (HSYNC)

  • shonmurehwa
    shonmurehwa May 28, 2012

    i have the same problem wreby after replacing the fuser unit the machine is not working

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Xerox phaser 3100 mfp error HSYNC
What can i do to solve ?

Posted on Dec 11, 2012

  • Delci saddek
    Delci saddek Mar 19, 2015

    if the pbm is "error print hsync" you have 90% the ROS:rster output scaner.

×

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Its related to the LASER UNIT! When I had the problem I had the front cover off so it wasnt hitting the laser interlock switch which is located in the slot in the sheet metal on the front of the machine when the front cover is not shut........... If that makes any sense.

Posted on Aug 14, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Printer error fuser tehp

Posted on Sep 07, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have xerox phaser 7500dn, it is giving me error code 010-328. How can i fix this error


Your fuser is not coming up to temperature. Power off the printer. Remove the fuser and check for any bent pins or breaks on the hot roller. If all looks all right, reinstall fuser and power up the printer. If the error returns. Your fuser most likely need replaced. I hope it's just that. Replacing the Main Control Unit Printed Wiring Board (MCU PWB) or the Main Low Voltage Power Supply (LVPS) are not cheap! Then again, neither is the fuser! But not as much as the other two!

Mar 02, 2016 | Xerox Office Equipment & Supplies

1 Answer

Printer error fuser temp for phaser 3100 mfp


try removing the fuser. restart the machine. place fuser back. If this doesn't work you'll need a new fuser. (Fuser is thing that get's warm on right side of the machine)

Nov 27, 2013 | Xerox Phaser Office Equipment & Supplies

2 Answers

How to Slove Fuser Temp. (XEROX 3100 MFP)


I have been struggling throughout the night to remove the Printing error Fuser temp following the suggested given but all were in vain. By accidently I managed to remover the error message by pressing # together* then switch on... super! vilho nhoni from Namibia

Jun 16, 2011 | Xerox Phaser 3100MFP/S Laser Printer

1 Answer

I am having xerox 3100 mfp,and since last 4-5 dys massage on the screen is displayin FUSER TEMP. how i can get rd of this? pl help


Fuser problem is that the thermistor can be damaged due to overheating Fuser thermistor or try to replace the entire fuser, clean electrical contacts which could cause malfunction of fuser.Este indicated a specialist to handle this

Mar 04, 2011 | Xerox Phaser 3100MFP/S Laser Printer

2 Answers

Printer error fuser temp


You will have to replace the fuser. Call 1-800-835-6100 and follow the prompts to purchase parts. It isnt real expensive. Just make sure you still don't have some warranty left on the parts.

Mar 09, 2010 | Xerox Phaser 3100MFP/S Laser Printer

3 Answers

Xerox Phaser 3100 Printer Error Fuser Temp.


fuser Temp printer error problem.please give me the solution.

Sep 14, 2009 | Xerox Phaser 6120/YN Laser Printer

1 Answer

Error H-4




H4-00 on Sharp means that the temperature inside the printer is too low. That is usually the fuser lamp, and sometimes the temp sensor jammed.

Only when the problem is a jammed temp sensor or a jammed control board you can reset the machine by doing a reset.

You try reset from simulation mode by following procedure below:
Clear key >>Interrupt key >> "0" key >> Interrupt key >> Main code >>Start key >> Sub code >> Start key

If the error remains, that means that the fuser is really bad and must be replaced.

When this happen you need to have the fuser unit replaced, if that does not fix the problem the technician will replace the temperature sensor.

Mar 01, 2009 | Xerox WorkCentre XD100 All-In-One Laser...

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

6,347 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

70374 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...