Question about E-Machines eMachines Desktop PC
My computer has been in my closet for a long, long time now because I can't get it to work. I don't care about anything but completely restarting it to the factory settings. I just did that with my Dell XPS M140 because something happened to it by holding ctrl & pressing F11 before pushing the power button. That's all I want to do, I don't want to try to fix it, I just want to completely restore the whole thing. If someone could help me that would be amazing!!
You just need to run the os installer cd and press the repair, the whole setup will run without lossing data on your drive D.
Posted on Aug 17, 2008
First of all, is the machine running?
If not check the basis:
1. that the cord is working properly, replace it and connect PC.
2. if the PC is receiving electricity, the fan on the back will be moving. If not the Power supply is dead.
If is running and the Operative system is not:
1. the internal battery on the board has to be replace.
2. the hard disk is dead.
We need more information of tha the PC do or don't.
Posted on Aug 09, 2008
Plz check your ram and try another ram which you know is working.If the problem still persist than let me know with your machine specs.Did you install any new hardware prior to the stop error
Posted on Apr 01, 2008
Install a new copy of windows if that problem persist again, try to check your RAM. Replace a new one and then run your pc again
Posted on Feb 19, 2008
I am having the same problem with a T6410, however, the system bluescreens after loading the "restore" disk. I have even tried different windows install discs (that I know work) as well as different hard drives (both SATA and IDE) and the same thing happens. Here is the STOP error: STOP: 0x0000007F (0x0000000D, 0x00000000, 0x00000000, 0x00000000) I'm at a loss, so any assistance would be appreciated
Posted on Jun 02, 2007
In Spanish..... Sorry..... First como no hay garantia puedes abrir la PC....debes cambiar la pila de la board preferiblemente una Sony o Toshiba de la board para que te guarde la configuracion del setup luego configura la fecha y el inicio de los drives hard disk,boot, etc, sino eres experto hazle autodetect y o lee el manual y restaura lo mas default posible generalmente todo el software esta alli, no vayas a tocar o formatear el disco duro....sino te fegaste y la operacion seria mas compleja.....eso pasa es por baja en la pila de la board....y te funciona como sino tuviera sistema operativo...si quieres escribe a mi mail como sigue: firstname.lastname@example.org, si tienes una pregunta mas especifica o necesitas pasos mas faciles.. good luck
Posted on Jan 01, 2007
If you cannot get it running then you cannot use the restore facility thats probably on a partition of your hard drive. The only way to get going again is if the pc will boot and enable you to set your CD/DVD drive as the first boot device in the bios(Press DEL or F2 at boot up); and start up the system with a Windows Installation CD in your cd drive; and press enter to install or R for repair of the system files.
Posted on Jan 01, 2007
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Jan 05, 2018 | Time Computers & Internet
on Dec 16, 2013 | Retail Supplies
on Jan 05, 2010 | Cell Phones
Dec 01, 2015 | QMark MUH (0521) Compact Heater
Jul 20, 2011 | Video Game Consoles & Games
Jan 04, 2010 | Kitchen Appliances - Others
Jun 23, 2009 | Apple iPhone Smartphone
517 people viewed this question
Usually answered in minutes!