Question about NorStar T7316E Corded Phone

1 Answer

Display Names Several employees have changed desks in our office but we need to change the name that shows up on the display. When you call the new employee the former employee's name shows up on the ID. I know I can reconfigure this using Feature **266344 but the 266344 password doesn't work. Am I doing something wrong? How can I reset the password so we can get into that feature?

Posted by on

  • tammy459 Dec 10, 2008

    im having the same issue, we here in our office changed offices and we cant figure out how to change our voice mail to the right extensions?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Hi....go to www.phonserv.com and you will find the answers to just about all your questions for this phone....I could send you a copy of mine if you like just send me your email or go to the site yourself and print one...its very handy....

Posted on Nov 24, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I change the display names on the various extensions in my office as employees change? Assistance would be greatly appreciated. thank you!


When your phone system was installed, someone either did his job and gave you instructions for making simple changes or he didin't. Names are programmed under system command 004 from the master phone. IIRC it's covered in the OM under System Administator or something similar.
You'll also find programming for your extension in the same book.

Carl

Apr 04, 2011 | Panasonic KXDT321 Phone

2 Answers

Change the inter callers name


To chane the name on the sets you'll need to enter telephone programming.
Programming is done on 7310, 7324 and 7316 type sets.
Enter programming by pressing the feature key followed by **266344.When prompted to enter the password enter 266344.
The screen should say TERMINALS&SETS. The 4 top line/feature keys are now used for programming.
At the terminals&sets prompt, press the show key (top right arrow).
The display should now ask for an extension number.
Enter extension number you want to change the name on.
Press the show key (top right arrow)
The display should say LINE ACCESS
Press the next key (bottom right arrow) .
The display should say CAPABILITIES.
Press the next key (bottom right arrow) .
The display say Name.
press the Chng soft key.
use the dial pad to enter the name. advance using the arrow soft key to go to the next letter
ex. john = 5 -> 666 -> 44 -> 66
Press the next key (bottom right arrow) to enter the name.
Press the release key when finished

Jul 16, 2010 | NorStar M7324 Telephone

1 Answer

Change display names


A problem with answering this question is first that the main SYSTEM keeps this info not the handset, so for the 3x8, 6x16, and 8x24 systems you can do the following (PROVIDED, the installer did not change the passwords to access).

Press FEATURE * * 2 6 6 3 4 4
Enter Password: 2 6 6 3 4 4 Display will read: " A. Configuration"
Press: NEXT Display will read: "B. General Admin"
(NEXT is always the button on the right of your lines/extension list, 2nd button down from top.)
4. Press: SHOW Display will read: "1. Sys speed dial" (SHOW is one key up from NEXT)
5. Press: NEXT Display will read: "2. Names"
6. Press the SHOW Display will read: "Set names"
7. Press: SHOW Display will read: "Show set:__"
8. Enter the extension number of which you wish to change the name Display will read: "<##:name>"
9. Press the CHANGE softkey
10. Using the dial pad spell out the name Ex: If you need the letter K press the 5 key twice and then press # to confirm the letter. Continue until the entire first name is spelled. (note: you are limited to 7 characters)
11. Press: NEXT (if you fail to do this step, the name will not be saved!!!)
12. Press the RLS key

I may be mistaken however I think you have to be on a model M7310, T7316, or M7324 phone (there should be at least one usually at the main desk) in order to program I don't think you can directly do it from the T7208.

Hope this helps.

May 04, 2010 | Nortel Business Series Terminal T7208 -...

1 Answer

Voice mail display & retreving messages


Do you know how to get into phone system programming? The extension names are changed in there.

Mar 10, 2010 | NorStar M7310 Corded Phone

1 Answer

We have employees that have left and new ones have taken their place. How do I change the names on the phone display to the new employee?


Programming is done on 7310, 7324 and 7316 type sets.
Enter programming by pressing the feature key followed by **266344.When prompted to enter the password enter 266344.
The screen should say TERMINALS&SETS. The 4 top line/feature keys are now used for programming.
At the terminals&sets prompt, press the show key (top right arrow).
The display should now ask for an extension number. Enter extension number you want to change the name on.
Press the show key (top right arrow)
The display should say LINE ACCESS
Press the next key (bottom right arrow) .
The display should say CAPABILITIES.
Press the next key (bottom right arrow) .
The display say Name.
press the Chng soft key. (or the clear key to erase)
use the dial pad to enter the name. advance using the arrow soft key to go to the next letter
ex. Bill = 2,2 -> 4,4,4 -> 5,5,5 -> 5,5,5
Press the next key (bottom right arrow) to enter the name.
Press the release key when finished

Jan 21, 2010 | Nortel T7316E 2-Line Corded Phone

1 Answer

Need to change the names on display within the office alls


You have to go into programming under sets, and change the name. If you are unsure how do get into the system admin, then I would call a professional in, as you can do more harm....

Dec 17, 2008 | NorStar Meridian M7310 Phone

1 Answer

Station (extension) names


From extension 10 or 11

Feature 00
Left intercom
Left intercom
Right intercom
enter the extension you want to modify
press the left intercom
Enter the name.
When finished, press feature 00 to exit programming.



Nov 11, 2008 | Lucent PARTNER18 Corded Phone

1 Answer

Name on display


depends on the phone system, but it is done in program mode. unless its ipk2 tahn speaker 728 allows you to enter a name. ldtsnj.com

Oct 22, 2008 | NEC Dterm DTP 16D-1 Corded Phone

1 Answer

NORSTAR m7310


To Log Into System Programming:
Press FEATURE * * 2 6 6 3 4 4
Enter Password: 2 6 6 3 4 4 Display will read: " A. Configuration"
Using the navigation keys, as displayed below, follow the next simple steps:
Press: NEXT Display will read: "B. General Admin"
Press: SHOW Display will read: "1. Sys speed dial"
Press: NEXT Display will read: "2. Names"
Press: SHOW Display will read: "1. Sys speed dial"
Press: NEXT Display will read: "2. Names"
Press the SHOW Display will read: "Set names"
Press: SHOW Display will read: "Show set:__"
Enter the extension number of which you wish to change the name Display will read: "<##:name>"
Press the CHANGE softkey
Using the dial pad spell out the name Ex: If you need the letter K press the 5 key twice and then press # to confirm the letter. Continue until the entire first name is spelled. (note: you are limited to 7 characters)
Press: NEXT (if you fail to do this step, the name will not be saved!!!)
Press the RLS key

Hope this helps!

Jun 17, 2008 | NorStar Meridian M7310 Phone

2 Answers

Changing employee name on extension


http://www.phonserv.com/1_m7310_phone_meridian_norstar_phone_system.htm

This has PDF file that will give instructions.

Also this link has more instructions:
http://www.phonserv.com/1_PDF_user_guide_meridian_norstar_phone_systems.htm

To Change the Name on a Mailbox:
1. Log into system administration
2. Select the softkey under "MBOX"
3. Select the softkey under "Chng"
4. Enter the mailbox number (extension. you want to change the name on
5. The display shows "Reset Password"
6. Select the softkey under "Next", keep hitting "Next" until the display shows the name
7. Select the softkey under "Chng" to enter a new name
8. Enter the name using the dial pad. Enter last name first, press "# #" to enter a comma and then enter the first name. When spelling the name, press "#" to move to the next character
9. Select the softkey under "Next" to save the change
10. Hit the release button

Apr 30, 2008 | NorStar M7310 Corded Phone

Not finding what you are looking for?
NorStar T7316E Corded Phone Logo

705 people viewed this question

Ask a Question

Usually answered in minutes!

Top NorStar Lands Phones Experts

george  peters
george peters

Level 3 Expert

860 Answers

kakima

Level 3 Expert

101516 Answers

dan4261

Level 1 Expert

14 Answers

Are you a NorStar Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...