Question about Linksys BEFSR41 Cable/DSL Router W/4 Port Switch, Retail Box (DSLSBEFSR41)

1 Answer

Pc to pc

I can't see the computers connected to the router,please teach me how to set up.thanks

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 57 Answers

Follow instructions for setup.
1. in your computer network adapter TCP/IP settings, set into "Obtain as IP address Automatically".
2. do the same(step 1) in other computer
3. after saving the settings you should have now a network for two computer thru router.
4. one of your computer should have an IP 192.168.0.2 or 192.168.1.2 as most of router default IP series is 192.168.0.0
5. if you have this series of IP for both computer you have already a network
6. to test if both computer is communicating run this command at DOS or Command Prompt( click start, run and command the click OK
7. at DOS command prompt type PING 192.168.0.2 (ping the IP address of the other computer in your network)
8. or you can also ping the computer name like PING mycomputer(your laptop or desktop computer name)
9. successful PING should have a "reply from" results.

Hope this will help you

Posted on Nov 27, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to set it up


Hi,

The following links will teach you how to set up any routers for a wireless internet connection.



Click the link below for proper cable connections in setting up your wireless network.

http://www.microsoft.com/athome/organization/wirelesssetup.aspx


Then, configure your wireless connection. The following links provides the step by step instructions for each version of Windows:

Windows XP. http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/wlan_client_configure.mspx?mfr=true

Windows Vista. http://windows.microsoft.com/en-US/windows-vista/Setting-up-a-wireless-network

Windows 7. http://windows.microsoft.com/en-US/windows7/Setting-up-a-wireless-network




I hope this works for you. Kindly reply for further assistance. Good Luck!

Thanks for using Fixya!
Mongkey
TIPS: Is your computer slow? This might help
http://www.fixya.com/support/r8158906-diy_manual_pc_tune_up
(for Windows only)

-->

Add a comment

Apr 16, 2011 | NetGear WNR2000 Wireless Router

1 Answer

I need to now how set up wireless internet


Hi,

The following links will teach you how to set up any routers for a wireless internet connection.



Click the link below for proper cable connections in setting up your wireless network.

http://www.microsoft.com/windowsxp/using/networking/setup/wireless.mspx


Then, configure your wireless connection. The following links provides the step by step instructions for each version of Windows:

Windows XP. http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/wlan_client_configure.mspx?mfr=true

Windows Vista. http://windows.microsoft.com/en-US/windows-vista/Setting-up-a-wireless-network

Windows 7. http://windows.microsoft.com/en-US/windows7/Setting-up-a-wireless-network




I hope this works for you. Kindly reply for further assistance. Good Luck!

Thanks for using Fixya!
Mongkey
TIPS: Is your computer slow? This might help
http://www.fixya.com/support/r8158906-diy_manual_pc_tune_up
(for Windows only)

Mar 09, 2011 | Computers & Internet

1 Answer

I have Belkin g wireless router modem but i don't have user manual that's why i can not puting the security password and so many people are using my modem, pls help and teach me how i put security password...


Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. Then click on wireless settings then wireless security then enable WEP and enter WEP code it is your password to connect wifi. Then save settings and restart router. Let me know if you need further assistance. Thanks for using FixYa.

Aug 15, 2010 | Belkin F5D7234-4 Router

1 Answer

DIR-615 Wireless Router: i have a d-link wireless router dir 615 that i've ...


if youve changed the password on the router since the other computers logged onto the network, then you need to delete the network history from those computers.
Otherwise those laptops will be trying to connect to the network with the old details.

May 16, 2010 | D-Link DIR-615 Wireless Router

1 Answer

My D-Link wireless DI-524 router, does not allow my computer to receive updates such as from Windows Update, or AVG Anti Virus site. Just surfing the net while connected through it, works just fine. If I...


Hi! In your case has nothing to do with your router its in your windows setting. change check on the automatically receive windows update.. Give me your contact details i can teach you step by step instruction or CHAT WITH ME in FIXYA.. good luck THANKS

Mar 20, 2009 | D-Link AirPlus DI-524 Wireless Router

1 Answer

Getting set up


You should setup connection like this:

From ADSL modem to LinkSys Router and then your PC/Laptop should have a wireless card. It will work fine

Jan 27, 2009 | Linksys Wireless-G WRT54G Router

2 Answers

DHCP problem and router connection


  • access 198.162.0.1 router's configuration page and set the settings IP addressing to DHCP or auto assigning the IP addresses and the DNS
  • set the router mac address to the middle option set to computer mac address
  • and make sure all the computers connected to the router and the switch is set to automatically detect the IP address and the DNS is all set to auto detect...
  • how to access XP...goto to control panel and select network connections (for vista network and sharing center, manage network connections) and right click on the LAN, select properties select tcp/ip and click properties. and selct automatically assigns IP address and DNS.

Jun 07, 2008 | NetGear FS608 Networking Switch

1 Answer

Teach me pls...


hello!

-- who is your internet service provider
-- what is the operating system of your computer?
-- is this working fine before or is this a brand new router

you may try this and see if this help solve your problem. make sure your computer is directly connected to the router

Step 1: Shutdown the computer.
Step 2: reset the router while power on then Unplug the router’s power cable.
Step 3: Unplug the Broadband modem’s power cable and wait for 30 seconds.
Step 4: Plug in the Broadband modem’s power cable and wait for its lights to appear stable.
Step 5: Plug in the router's power cable once the modem’s lights appear stable.
Step 6: Power on the computer on and configure the router settings
Step 7: test the Internet connection.

if this still didnot work, upgrade the firmware of your router

note:

configuring the router settings will depends who is your provider. if your isp is dsl you need to configure your ISP username and password on the router. if your router is a cable no need to change any settings on the router. it should automatically work


if you are still having trouble configuring your device, call supportrix and use supportcall as your promo code for 1 free technical support.

Jun 05, 2008 | Computers & Internet

1 Answer

L2TP connection problem


Hello, I've had the electric cut off and immediately back on and I lost my connection from Wireless router to modem. I could not connect in the same way. I could access the router settings with wireless laptop and PC but not to internet on either. I bypassed the router and connected the PC computer to modem then to internet verifying with a browser. I then reconnected the computer cable back to router and router to modem. It stayed connected. But I'm not sure if you have a PC connected to the router also. Sometimes just unplugging some cables and replugging will solve problems. Hope this helps.

Feb 18, 2008 | D-Link AirPlus DI-524 Wireless Router

1 Answer

Router and configuration settings for DSL wireless setup


Maybe you should use same brand of your adapter, use belkin wireless router.

Most of the router has a manual attachment, it will teach you how to configure the router..

Nov 16, 2007 | Computers & Internet

Not finding what you are looking for?
Linksys BEFSR41 Cable/DSL Router W/4 Port Switch, Retail Box (DSLSBEFSR41) Logo

Related Topics:

86 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

mark

Level 2 Expert

105 Answers

Are you a Linksys Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...