Question about Linksys Wireless-G WRP200 Router

1 Answer

Can't access voice tab on WRP400

I am trying to set up internet and VoIP connection. I have a NetComm NB6 acting as the router, and a Lynksys WRP400 as the wireless - for the internet connection all works OK. However I have locked myself out of the voice tab (can't get back in despite doing a full resedt). The ip provider has given me the sip address and told me which port to open - but I'm not sure how. Can you help?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 171 Answers

If your wireless VoIP router was provided by your VoIP provider they will usually lock this option on the router since they have pre-configured the voice settings(sip server, phone number, password, codecs) before they deliver the device to your location. if you have a working internet connection already you can give your VoIP proiver a call so that they can remotely check the voice settings on their end to verify if it's working or not.

Posted on Nov 25, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have swtched from adam to dodo and have a netcomm nb6 modem but cant get internet is there a unlock code for the modem


Dear A,

Internode offers a procedure for your device at this link Internode Support Guides Wireless Guides NetComm Routers NetComm NB6Plus4W


Here is a connect to internet link provided by Netcom Quick Start


Resolve VPN client issues here with this procedure NB6 Series How do resolve VPN client issues



Updating your firmware here Support ADSL2 Modem Router NB6 Rev2



Fare. Well.

Feb 09, 2014 | NetComm Computers & Internet

1 Answer

Cannot send attachments with emails after installing VOip adaptor router


Hi,

Just would like to ask additional information pls, have you enabled NAT in the VOIP Router? MTU 1500 or something like that?

Appreciate if you can post back info.

Kind regards.

Feb 07, 2008 | Computers & Internet

1 Answer

Cannot access 192.168.22.1


In order to restore your router to its factory default settings, please follow these steps:
• Ensure that the ATA is powered on (for at least 20 seconds).
• Use a paper clip or a pencil tip to depress the reset button for ten seconds and release. At this point, the reset is in progress. Do not
power off the unit at this point.
• After the ATA reboots, the default settings are now restored. This entire process takes several minutes to complete.
• Once you have reset the ATA to its default settings you will be able to access the device's web configuration using
http://192.168.22.1 with username "admin" and password "admin".

1. Connect the WAN port to your broadband router using the Ethernet cable supplied. If you would like your PC to be connected to the network through the V210P/V220, you can connect another Ethernet cable (not supplied) from your PC to the LAN Ethernet
port. This enables your PC and the ATA to share one Ethernet port on your router/switch.
2. Connect your telephone handset to the Phone port. For V220, you can connect an additional handset to Phone 2 port.
Notes: A second VoIP account is needed unless your VoIP provider supports multiple connections from the one account and both ports need to be configured
individually (even when using one account that supports multiple connections).
3. For V210P unit, connect the Line port to your PSTN wall socket.
4. Connect the AC power adaptor and press the power button to turn the ATA on. The ATA will boot up and in a few minutes, the
Power and Ethernet Lights will light up.

You can read more here:

http://www.dodo.com/top-right-navigation/support/technical-support/voip/setup-guides/netcomm-v210p-setup-guide/

Good luck

Oct 31, 2012 | NetComm V210P

1 Answer

I bought this US Robotics wireless (model 5461 (Maxg)) maybe 3 years ago. I haven't used it in maybe 2 years and now it wouldn't work anymore. I recently switched apartments and computer, it used to work...


1.Log into router. Using either 192.168.0.1 to 192.168.1.1 in a browser window that is ( internet Explorer or Firefox)
2. Verify wireless router name( on the computer) >>> ( on/off) ( router status window)
3.Note router name you are connecting to.
4.. Check the laptop do ipconfig /all to see current IP addresses.
5. Set the laptop up in the router by WEP KEY or MAC address. This set up in the "security tab" in the router. using 192.168.0.1 or 192.168.1.1 to access through a browser.
6.Note router name you are connecting to.
7. Move the laptop about 20ft away and try to log on to the internet.
This is for all routers to set up wirelessly.
8. check for firmware update at the manufacturers site for your model router
9. cell phones, cordless phones, digital TV's, can affect the data signal from a router. Also distance from the router can be a factor. If your router is in a basement place the router to a upper floor and center it in the room.

Oct 04, 2010 | U.S. Robotics MAXg USR5461 (738168036790)...

1 Answer

Iphone to my netcomm NB7Plus4W router issues


you need to update your netcomm so that the modem router can identify your iphone's or mac's firmware.
to do this type in your browser '192.168.1.1' and press 'management>update software'

Feb 09, 2009 | NetComm NB5PLUS4W Wireless Router

1 Answer

Lose Connections over and over...


You may need to set specific ports on your router to use the voip. log onto router and go to the applications and gaming tab to set the specific ports voip needs to access Internet.

Jul 07, 2008 | Linksys Wireless-G WRT54G Router

1 Answer

Siemens Speedstream 4200 NetComm V300 on VOIP


When the V300 Line/Phone led flash in alternating fashion, it's telling you it's WAN connection is dead. The WAN light is off too. so internet and VoiP phone will not work

When the V300 Line/Phone led flash in sync, it can't register to the SIP server.

The V300 does not appear to be listed on the Mynetfone website though. Have you checked to see that your V300 has the latest Firmware. LINK

It may be that the V300 is not getting it's IP renewed. Can you alter the IP lease time? Do you have the V300 set up for PPPoE, or do you have it set to static or DHCP (refer CH4, page 25)

Jul 01, 2008 | Siemens SpeedStream 4200 (13A4200001)...

4 Answers

Voip and speedstream 6520


hi, XBRMann
re 6520 seimens wireless modem
i have DSL internet connection
when the phone call dies i hang up the phone and call again for the same amount of time 3mins and 18 secs
i am using the seimens modem/router with the voip adapter connected via ethernet cable
i have updated the seimens modem/router with the latest firmware from the telstra site E752-AF5-106-71-a056-v1s
lkratzma

Jan 28, 2008 | Siemens SpeedStream Modem (4100) (SS4100)

2 Answers

Cannot access the internet through my DIR-625


Check your IP address to 192.168.10.1 on the network settings
after that turn modem and VoIP off.
Click on Setup / Manual Internet
Select Dynamic IP under "My internet connection is"
Click on "Clone Your PC's Mac address"
Click on Save settings, if it ask for reboot click on reboot
After the router reboots (NOT COMPUTER), it will take you back to the router.
Once your are in the router, turn the modem on first then the VoIP.
After the modem and VoIP has finish rebootin
Click on the status tab of the router and check uder the "WAN"
Settings and check the IP address. If you get an IP address then check the internet.
If you do not get an IP address Click on Release and then renew.
If you still do not get an IP address click on Advance tab
Click on Advance network on the left and turn UPNP off and save the settings.
After that it should be able to get an IP address and you should be able to get online.

Nov 05, 2007 | D-Link DIR-625 (790069292637) Wireless...

Not finding what you are looking for?
Linksys Wireless-G WRP200 Router Logo

Related Topics:

576 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18344 Answers

mark

Level 2 Expert

105 Answers

Are you a Linksys Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...