Question about HP PSC 2175 All-In-One InkJet Printer

1 Answer

Last page of printing stops 3/4 through the page.

No matter how many pages are in the print job, the last page stops half or three-quarters of the way through. The printer just freezes on the last page. The printer itself will indicate printing but nothing will happen past the first half of the last page of the printing job. If I hit the printer icon on the computer and press "start jobs" the whole document will reprint except for the entire last page (it again will only print half or three-quarters of it). If I hit the print button on the printer, nothing happens. The printer will accept "cancel" and the printer icon will accept "delete". The printer is less than two years old. I appreciate any advice.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert that has over 500 points.

  • Expert
  • 390 Answers
Re: Last page of printing stops 3/4 through the page.

Try cleaning your heads with appropriate solution. Then, cancel all print jobs. Try again. If it does the same i would turn it off, inplug all the cables, replug all and turn on. Try again. If still no good, completely unistall printer then reinstall it. Try once more. Good luck

Posted on Aug 30, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

How to Cancel Printing in a Brother HL-2135W printer

Start by pulling the paper tray out to stop further pages being printed without jamming the printer up.

Then go onto your print queue on your computer and delete the job that is printing 50 pages.

If it dissapears then put the paper tray back in and it may print out the last page or two that were in the printer buffer.

If it does not dissapear from the print queue then turn the printer off and try to delete the job again.

Once you have ordered the job deleted then you can turn your printer back on and put the paper tray back in and allow it to continue. It should only print out the last page or two and then the job will dissapear

Sep 15, 2014 | Brother Hl-2135w Compact Wireless Mono...

1 Answer

How to stop printing once it has started

For Brother Laser Machines. Start by pulling the paper tray out a little. This allows the page that is currently feeding through the system the chance to get through without jamming causing a whole slew of other problems.

Once the printer has stopped trying to feed the pages through coming up with an error saying paper out then you can look at deleting all the print jobs in the print queue on your computer. All but the one currently being printed should disappear when you delete them. The one that is left will be errored.

Then turn your printer off for 30 seconds closing the paper tray and try to delete that last job from the queue.

If it will not go then turn your printer back on and let the last couple of pages print out. these are pages that are stuck in the system. If the print job did disappear then just turn on your printer as normal and it should be clear of any jammed printing and you don't end up with Paper Jams in the printer to clear.

Sep 06, 2014 | Brother HL Printers & Copiers

1 Answer

Epson 9880 prints half a job, then stops

i aint too sure if its the same but i had an epson printer with the same problem last year it would print half a page spit out and then print the same half a page again and just stuck in a loop even on printing disks it did the same i found out after by speaking to a printer specialist it was the printers eeprom which is the printers memory bank that was failing and nothing can be done with it

Feb 11, 2014 | Epson 9880 stylus pro Printer

2 Answers

Samsung CLP-315W Color Laser Printer will print only half page

Mar 23, 2010 | Samsung CLP-315W Laser Color Printer

2 Answers

HP officejet 9130 printer: pages keep printing

Yopu can change the rprinting order from the Print Dialogue box or Printer driver.

Look for the following to change page grouping when printed
and the followintg to change printing from first to last and last to first pages


Nov 13, 2009 | HP OfficeJet 9130 All-In-One Thermal...

1 Answer

Middle of print job - stops to CLEAN - then starts from pg1 AGAIN

This is a simple 3 step fix

a) Get rid of printer
b) Get rid of husband
c) Get new printer

Hope this works!! :-)

Jul 16, 2009 | Brother MFC 210C All-In-One InkJet Printer

2 Answers

Printer cuts off last line of text on document

go to control panel and click printers, right click printer and select properties, go to ports tab and uncheck 'enable bidirectional support' box or see thie website

Jun 18, 2009 | HP Photosmart C6380 All-In-One InkJet...

1 Answer

Printing oddly

I'm sure that this is a driver issue uninstall the driver from remove programs and delete the printer from the printer and faxes folder then reinstall as you would have when new.

Give this a try
Thanks J

Jan 25, 2008 | HP LaserJet 2420 Printer

1 Answer

Printing only the top quarter of the page.

Believe it or not all you have to do (probably) is to clean out your temporary internet files. This quite often works.

Nov 01, 2006 | Canon BubbleJet i550 InkJet Printer

Not finding what you are looking for?
HP PSC 2175 All-In-One InkJet Printer Logo

342 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Printers & Copiers Experts


Level 3 Expert

94039 Answers


Level 3 Expert

7983 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a HP Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides