Question about Projection Televisions

1 Answer

I have a Pioneer PDP 60 inch plasma tv and I just recently noticed a thin line just right of center that starts at the bottom of the screen and goes straight up about 12-15 inches long. When certain colors are displayed on TV, like a solid red background the line looks purple. Can this be fixed?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

This is Most likely a small crack in the screen the color is actually from the plasma it cant be fixed by yourself but i would reccomend checking the warranty or try taking it back

Posted on Nov 24, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Pioneer Elite Pro-118 rear projection tv


ya mine did something close to the same. at the moment i covered the blue canon inside the tv now the picture isnt 2 of eveything. the tv comes apart easy from the front good luck mike

May 02, 2010 | Pioneer PRO-200 60" Rear Projection...

3 Answers

I have had a Hitachi 42" Plasma screen TV for almost 3 years and recently it has had problems. When you turn it on, the TV only stays on for about 10 minutes, and then the screen goes black with the...


The signal from the STU to the Hitachi box is going in the wrong direction.
Is the adaptor that you have switchable? If so, flick the switch in the
other direction and this will fix it. If the adaptor is not switchable get
one that is. Then set the STU output to RGB.

Hope this Helps. -CA

Jul 14, 2008 | Projection Televisions

1 Answer

Mitsu. 60-inch VS-60609 Green Light goes out..tv goes off.


You are dealing with bad solder connections. The solution is to pull the board, put it under a magnifying glass and resolder all suspicious connections. before going too far with pulling the chassis, look over all the boards near the egde under the tubes. Be sure there is no liquid present, if there is give it up the set is toast. If not then continue on and place piece of plastic draped over the front of the left and middle boards to about 5 inches in towards the center just before putting the back on the set.

Dec 21, 2008 | Mitsubishi VS-60609 60" Rear Projection...

1 Answer

Hitachi 32" Plasma TV fault on screen thin pencil type line on left hand side of screen from top to bottom. Line thickness is approx 1mm TV is 5 years old Thanks Tom


iav a sky 42 inch plasma model number pd54250 when i swich it on i av got a green lined picture sometimes it comes on with a full picture can you help

Nov 22, 2008 | Projection Televisions

1 Answer

I have a pioneer 50 inch plasma model no pdp507xda i need a new screen how much will it cost cheers


part #AWU1316 Pdp Service Panel it is listed as no longer avaible because they do not sell the pdp to the public or non service centers
sorry
scott

Nov 04, 2008 | Pioneer Projection Televisions

1 Answer

Picture crooked. skewed torwards bottom right corner.


replace convergance IC
http://home.earthlink.net/~oleg.filippov/ConvergenceFix.htm

Dec 11, 2007 | Philips 60PP9352 60" Rear Projection...

1 Answer

Weird lines


your getting a 120 cyclr hum,possible a leaky cap in the power supply also check all ground connections are tight

May 23, 2007 | Sony KP-51HW40 51" Rear Projection...

Not finding what you are looking for?

Open Questions:

Projection Televisions Logo

Related Topics:

142 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

60960 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...