Question about SySTOR Systems (400S52) Burner

1 Answer



Posted by on

  • sheihume Nov 28, 2008

    when i try to burn files on a CD, it keeps on notifying me that, no



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 162 Answers

Could be a corruption somewhere to your computer and RIGHT click on the icon go to properties and go to device manager ....and check your cdrw drive ..under the drives tab...usually with the plus sign and see if the driver is ok ...if you don't see any question marks right off the bat that is a good sign just means you will have to dig a bit deeper ...
in some burner programs you may have a temp folder where your cd burning info is stored and they can get full....check the path where your cd temp maybe folder is ...and see if it is may have to make another folder which would create another path automatically....these are just suggestions...not solutions...but check your hardware under device manager that would be the first to check...

Posted on Nov 24, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Does it burn blank CD disk

usually if it tells you it does then we have to assume it does or will if done properly

Aug 31, 2015 | Computers & Internet

1 Answer

Ok so my compaq presario windows xp home edition service pack 3 cd burner was working fine till just a few minutes ago Windows Media Player said Connect a burner. I unistalled wmp and reinstalled still had...

make sure that the cd burner is getting enough power test all leads that are attached to the cd burner including electical extensions and make sure they have a secure connection or just replace them there might be bad/faulty or
your drivers may have been corrupted or you might have a virus run your antivrus program
you might have to physically unplug the leads for this cd/dvd burner then plug them back in or
you might have to uninstall then reinstall your DVD/CD or uninstall the driver then reinstall for this device
control panel admistrive tools,computer management,device manager scroll down cd dvd rom drives right click you can you can update driver,roll back driver,or
select properties general troubleshoot, select driver click to reinstall drivers click update driver or uninstall then reinstall
hope this helps
if this does not fix the problem it might be a registry problem

Close all open programs

Click on Start, Run, and type regedit and press Enter
Click on the plus signs (+) next to the following folders







This folder is the DVD/CD-ROM Drive Class Description in the registry. Look for any of the following names in the right hand column.

Upper Filters

Lower Filters

Upper Filters.bak

Lower Filters.bak

If any of the above keys shown in step 4 are listed, right-click on them and choose Delete

After deleting the keys, close the registry editor
Reboot your computer

Open My Computer and check to see if your CD or DVD drives have returned. You may also want to open Device Manager and verify that the yellow exclamation and error code on the CD or DVD drive is gone.

hope this helps

Jan 03, 2011 | Compaq (CDD480172) CD-RW Burner

1 Answer

Hello: my computer won't burn a cd. It says to connect a burner through my wmp.

Thank you for your question.

The first step you need to take is to ensure that you have a CD Burner attached to the Computer. Open "My Computer or Windows Explorer" and check under computer heading if the CD/DVD has RW behind the entry. This confirms that you have a Burner in place and the computer is seeing it as such.

If not you will need to have someone with the skill to check the initial BIOS (or "Google" a video) of the computer, where it checks what hardware it has attached and set it properly.

If indeed you have a burner in place it may need to have its drivers updated and you can connect to Gateways home site to obtain updated drivers for the burner. I have provided a link for you, on the homepage, select your Region/Support/Drivers and Downloads, then update your driver.

It should then be good to "go", if not, possibly you would need to have the Drive checked as it might be damaged. If it is under warranty, make arrangements with the dealer/seller you purchased it from.

Kind regards

Would you please take a moment to vote, I use the feedback to assist in answering further questions.

May 11, 2010 | Gateway Computers & Internet

1 Answer

Windows Media Player 11 does not recognize my HP DVD/CD Burner..

WMP cant recognize it.The OS (WIN XP) is the one .So!

1-Uninstall the burner driver
b-Do a system restore
Install again! Good lock!

Feb 23, 2010 | Creative Labs Blaster CD-RW 4224 Burner

2 Answers

Connect burner and restart Windows Media Player

Select {4D36E965-E325-11CE-BFC1-08002BE10318} at the end of the following path:
In right pane select UpperFilters do an Edit/Delete
In right pane select LowerFilters do an Edit/Delete

Right click MY COMPUTER
Device Manager
Uninstall CD/DVD player/burner

Restart the machine and it will find and reinstall the burner
NOTE: if you’re uncomfortable deleting registry entries, rename them (e.g., w/ “.SAV” extension)

Jun 06, 2009 | LG (GCC4521BBULK) CD-RW/DVD-ROM (Combo)...

1 Answer

When connecting the dvd burner and the camcorder to a cannon fs11

I'm not 100% sure of the question your asking here but I believe that the message you're getting is because you need to have...

(A.) Power cable plugged into the DW-100 (I assume you're OK there).
(B). USB Cable connecting the DW-100 and your camcorder (OK there too)
(C.)You must ALSO have your power cable plugged into your camcorder.

Many people forget about 'C' but Canon works on the premise that offloading data can take time and drain the whole battery so you must have everything running on A/C in order to do your work.

Hope this helps.

Jan 20, 2009 | Canon DW 100 DVD-RW Burner

1 Answer

Wont play dvd movies

have you installed the appropriate codecs ? if not do a search for them from google and install them should cure the problem

Jan 23, 2008 | Sony DW-U14A 4x DVD-/+R(RW) (ELU14A)...

1 Answer

Burner not rcognised

wmp is not a very good choice for burning disks, try nero alcohol 120%, goo media center, or roxio easy dvd creator, when you say it won't recognize the drive what exactly is the issue, what errors do you see, they are there for a reason, they provide information that can potentially solve the problem for you, also what operating system and the brand/model of the burner would be useful in trouble shooting the problem.

Dec 23, 2006 | LG GSA-H10A Burner

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

209 people viewed this question

Ask a Question

Usually answered in minutes!

Top SySTOR Systems Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers


Level 3 Expert

100288 Answers

David Payne
David Payne

Level 3 Expert

14160 Answers

Are you a SySTOR Systems Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides