Question about iLO V27DMBX Television

1 Answer

32'' LCD brand name byd:sign will not power up when room is cold.

Normally power indicator is red when in standby and turn blue when you power button on remote or power switch on the unit. It is the same LED for both indications. Had noticed that standby red, would sometimes blink on its own. I was told that the problem might be the cold, so I took a hair dryer and warm the set up for a few minutes. Sure enough in a few minutes it seem to be normal again. Is this possible, and if so what is the min operating temperature.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Tv will not power up

Posted on Nov 26, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

LG55LH40 LCD TV wont come on


The set will need to be properly diagnosed. It could be a defective main board or power supply.

Sep 01, 2012 | Flat Panel Televisions

1 Answer

I need a power cord for a BYD LCD tv model D:3032


Power cords can be bought from most of the electronics spare part selling shops at your town. There is no special attention to choose one. Select a good quality power cord from a reputed brand. that is all.

Jul 03, 2012 | byD sign 3032 30 in. HD-Ready LCD...

1 Answer

PLTV3250 have a blue screen and wouldn't power on. power button wouldn't respond to touch.


Can you please clarify the BLUE screen, but since the TV will not turn on, how do you get blue screen?
This model is known to have bad power supply module.
Check the power supply; look for bad caps with leaking/bulging tops, check to see if you have standby +5vdc at the power supply connector, the front red indicator will not be on if you do not have this +5vdc standby voltage due to shorted out Q7 and ZD4.
http://s807.photobucket.com/albums/yy352/budm/Protron%20PLTV%203250/

http://s807.photobucket.com/albums/yy352/budm/

http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide
Power supply: http://www.google.com/products?rlz=1T4GGIH_enUS282US283&q=pltv+3250+power+supply&um=1&ie=UTF-8&ei=9lIDTL7XO4fcM7HA-Ds&sa=X&oi=product_result_group&ct=title&resnum=1&ved=0CCgQrQQwAA

Mar 03, 2011 | Protron PLTV3250 32 in. LCD Television

1 Answer

Pltv-3250 32'' lcd t.v. won't turn on.


Check the power supply; look for bad caps with leaking/bulging tops, check to see if you have standby +5vdc at the power supply connector, the front red indicator will not be on if you do not have this +5vdc standby voltage due to shorted out Q7 and ZD4.
http://s807.photobucket.com/albums/yy352/budm/Protron%20PLTV%203250/

Power supply: http://www.google.com/products?rlz=1T4GGIH_enUS282US283&q=pltv+3250+power+supply&um=1&ie=UTF-8&ei=9lIDTL7XO4fcM7HA-Ds&sa=X&oi=product_result_group&ct=title&resnum=1&ved=0CCgQrQQwAA

Feb 03, 2010 | Protron PLTV3250 32 in. LCD Television

1 Answer

I'm trying to program my ''Comcast'' cable box remote control to operate my byd:sign model d:5032M plasma TV. Comcast does not have a standard 4 digit TV code to use. How can I get the code as there is no...


If your brand of TV does not respond to the remote control after trying all of the codes listed, or if your brand is not listed at all, try searching for your code.
1. Turn on your TV.
2. Press and hold SETuntil the Red Light blinks twice, then release SET.
3. Enter in 9 - 9 - 1. The Red Light will blink twice.
4. While pointing the remote control at the TV and press and release the CH + key until the TV turns off. (Note: You may need to press [CH+] numerous times).
NOTE: In the search mode, the remote control will send IR codes from its library to the TV.
5. Press SETonce to lock in the code. The Red Light will blink twice.

Sep 19, 2009 | byD sign d:5032 50 in. HD-Ready Plasma...

1 Answer

Screen won't turn on. Red light showing it is off does work.


My plasma is on stand by mode,. It went off during a movie. It will not turn on when I press the power button, it only stays on stand by

May 22, 2009 | byD sign 4032 40 in. HD-Ready LCD...

2 Answers

No picture


btw for anyone experiencing these problems with the infamous "is-lcdtv32" byd:sign is the same manufacuterer as insignia, its the same company with a different sticker. i know this isnt a solution, but parts for all discontinued insignia';s can be purchased thru byd:sigh(by design). hope this helps .

Oct 06, 2007 | byD sign d:4232 42 in. HD-Ready Plasma...

2 Answers

New Sceptre 37" LCD TV does not turn on


I just got a 42" komodo by Sceptre, same problem, except "SCEPTRE" showed on the screen. I was sent a USB key program to insert in the service slot in the back and it reflashes the bios. This is old news for you but maybe new for someone?

Aug 28, 2006 | Sceptre X37sv-Naga 37 in. LCD Television

Not finding what you are looking for?
iLO V27DMBX Television Logo

Related Topics:

190 people viewed this question

Ask a Question

Usually answered in minutes!

Top iLO Flat Panel Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

The Knight
The Knight

Level 3 Expert

68323 Answers

Jim Goldsmith
Jim Goldsmith

Level 3 Expert

1869 Answers

Are you an iLO Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...