Question about Jensen XCH6RF 6-Disc CD Changer

Open Question

Jensen JCD 7000 car cd player error code ER-04

The single cd player comes up with an Error Code of ER-04 when a CD is inserted and returns to the radio selection. When you change modes from radio to CD it does the same, it tries to read, comes up with error code and returns to radio.
The CD player has been working before the car going to the mechanic recently, so battery could have been disconnected.
Tried almost everything to get to work. This has happened before (not with me) so there has to be a cure.

Posted by on

  • Anonymous Apr 14, 2009

    al insertar cd no lee disco y arroja error 4 , expulsando cd.



    andres

×

2 Suggested Answers

  • 1 Answer

SOURCE: Jensen car stereo

just turn the changer on, make sure it is playing a disk, (and you know whats playing) the press the scan function on your radio til it picks up that signal and lock it in.

Posted on May 24, 2008

  • 148 Answers

SOURCE: Error Code Displayed When CD Inserted

Error 01 is normally on most machines to say it cannot read the discs. Could be dirty laser or a defective one. Must open to make better diagnosis.

Posted on May 12, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My cd stacker comes up wit erorr 2 on the screen the car battery was replaced dose it need a code


in many of these changers error 2 means there is a cd stuck in the player, inserting an empty magazine for it to slid into often helps

Jan 12, 2015 | Clarion UC 6 CD Changer

1 Answer

Cd drive error


Try disconnecting your battery and reconnecting it. This can reset any issues within cd player. Unless you have something jammed in your cd player, then try using another cd to partially insert into the player and when you hear the motor trying to pull cd in, remove it slowly. Sometimes if there is another cd jammed, it will release this way. WARNING! You may need a security code to enter into the cd player after reconnecting your battery. Make sure you check your cd player manual before disconnecting your battery. Good luck.

Jun 04, 2013 | Car Audio & Video

1 Answer

Intermittent error code E-04 - CD won't play


I looked it up at Sony.com.They say E-04 means there is a problem with the CD changer(real helpful huh).It says you can press the reset button to reset your CD changer,but you will lose all memory and have to re-program it.The diagram looks like it has a removable faceplate?It is under there.Use a fine point to press it like a pencil.There is an * though and it says CDC-X517M only though.It also is basically the only resolution they give.They say if that doesn't work,you have to send it to an authorized AIWA center.
You may need PDF to look at the page.If yo do not have it,it is a free download,just google for it.I did it and you do not get ads popping up everywhere nor is it harmful.
http://www.kb.sony.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=CDCX417pdf&sliceId=pdfPage_8&docTypeID=DT_MANUAL_1_1&dialogID=184603613&stateId=0 0 184607067 Good luck!

Jul 23, 2010 | Sony CDX-5290 CD Changer

1 Answer

Error code E 03 on a Rockford Fosgate 6 disk CD player


I am having the same problems. Did you ever figure out what was wrong?

Jul 25, 2009 | Rockford Fosgate Car Audio & Video

1 Answer

E-4 error code


are you trying to mix a MP3 CD and a non MP3 player?

Mar 26, 2009 | Sony CDX-2250 CD Changer

1 Answer

Mutant MT2000


do you still have this CD player? Is it still faulty? would you be interested in selling?

vicki5150@hotmail.co.uk

Thanks

Dec 14, 2008 | Car Audio & Video

1 Answer

Not sure what the problem is


Check the changer and see if cds are inserted correctly or if 2 cds are in one slot.

Dec 13, 2008 | Alpine CHAS-634 6-Disc CD Changer

1 Answer

What does error code (Er-EL) on a Bose sound system on a 2002 Acura MDX mean?


You can disconnect the battery, reconnect it and use your radio code to get it working again. This worked for it...it's like I 'rebooted' the cd player.

Oct 22, 2008 | Car Audio & Video

2 Answers

Pioneer cdx 12 disc changer


According to manual code simply means electrical or mechanical fault - not extremely helpful.

Try to disconnect and reconnect power and it perhaps will reset the problem.

Feb 03, 2008 | Pioneer CDX-FM1289 12-Disc CD Changer

1 Answer

Error message E08


You said you cleaned the player but did you clean the disc? Any scratches, dirt debris? To clean the disc you can but special cleaning soultions at various retailers. Have you tried playing diffrent discs, that will help rule out if it's the player or disc.

Sep 12, 2007 | Jensen XCH6RF 6-Disc CD Changer

Not finding what you are looking for?
Jensen XCH6RF 6-Disc CD Changer Logo

Related Topics:

399 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jensen Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4724 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Iron
Iron

Level 3 Expert

3018 Answers

Are you a Jensen Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...