Question about Fisher PC-27S80 27" TV
My tv was working and then it wouldn't turn on! it just clicks somewhere in the back of unit when i push the on and off switch there is a light that usually lights up on the front of tv but does not light up now! could this be the power supply or something else?
Sounds to me like there is bad solder somewhere on the filament supply circuit. Do you know what a cold solder joint looks like? It is a solder joint that is not making a good mechanical or electrical connection. When you lose that connection the filament inside the tube slowly stops heating the electron guns and the picture will fade away. When the connection comes back the video will come back.
Might be worth it to take the back off and check out the little board that is connected to the end of the tube. The problem is either there or on the power supply.
Shouldn't be a problem for a repair tech. I would not spend very much money though.
Posted on May 22, 2009
Tips for a great answer:
Jul 11, 2013 | Standard (CRT) Televisions
Feb 15, 2013 | Standard (CRT) Televisions
Sep 14, 2009 | Sony KP-46S25 TV
May 22, 2009 | Fisher PC-25S80 25" TV
Dec 06, 2008 | Panasonic TX-42PT10 42" TV
Aug 30, 2008 | Standard (CRT) Televisions
May 19, 2008 | Fisher PC-27S80 27" TV
Sep 25, 2007 | Fisher PC-32S80 TV
174 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: