Question about E-Machines eMachines Desktop PC

2 Answers

I loaded window xp in my emachinest2824 coputbut the other device

After loading window xp in my emachines computer , i can not connect to the internet. i found that other devices shows yellow . how do i solve this problem. thanks the product is emachines modle t2824

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 306 Answers

Welcome to FixYa! My name is Steve. The yellow exclamation mark indicates, in this case, that the operating system does not recognize the device as a network adapter so it sends it to the Other or Unknown category. The chipset and network drivers could be on the recovery cd but you can download it here: http://www.emachines.com/support/product_support.html?cat=Desktops&subcat=T%20Series&model=T2824 and it is the Intel I/O controller, LAN and Network Interface that work together and are integral to the motherboard: http://downloads.emachines.com/drivers/network/Intel_PRO_6_4_14_0_readme_en.pdf  so the  yellow ! might also be one of the other circuits involved but you don't need to chase that down as the chipset & LAN drivers will take of that issue. If you need any further assistance please post again. Steve Medley

Posted on Nov 24, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 903 Answers

If you have various devices showing yellow exclamtion marks, then you may need to update the drivers for them, or the drivers for the devices are not installed.

Write down the make and model numbers of the devices then do a google search for the relelvant drivers to download. If you have trouble finding the drivers, let me know and I will see what I can do

I hope this helps

Posted on Nov 23, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Windows XP won't load on my emachine t3516


You may need to check to make sure Windows XP was installed properly, if the computer had crashed, you can do a repair, I am a computer technician, and I can tell you, that replacing the power supply will not do that.

May 20, 2012 | E-Machines eMachines Desktop PC

1 Answer

Emachines W3619 won't load ntldr


Take a windows XP CD, Switch on your PC and go to "BIOS" menu and select "Boot From CD/DVD" whichever is applicable for your pc.
Now insert the Win Xp disc i drive and start PC, Boot the Pc From CD Drive and you shall get the Blue screen of windows Installation. Restart the PC by hard pressing the power button for 30 secs.
Now you will be able to login to windows.

Dec 02, 2011 | eMachines W3619 PC Desktop

1 Answer

How can i down load suitable windows xp drivers


Access the web-site for the manufacturer of the motherboard (Dell? HP? Compaq? eMachines? IBM? Lenovo? Gigabyte? ASUS?) and select your motherboard, and select Windows XP, and download the correct device-drivers.

Jul 06, 2011 | Computers & Internet

1 Answer

Tried to do a restore with restore disc that came with the comput


There seems to be a problem with the operating system that is being installed. This often happens if you use the restore disks that came from another computer.

Are you sure that you used the disks that came with that exact computer? Does it flash a blue screen right before restarting the cycle?

Try the restore over again and if the problem persists, you may have to either order new restore disks for your computer or buy a fresh copy of Windows XP.

Apr 11, 2009 | eMachines T3604 PC Desktop

1 Answer

Emachine w3107 reboots when windows xp loads


These kinds of issues are most often related to driver conflicts. First thing you need to do is reboot your PC while holding F8, until you receive the menu about booting in to Safe Mode. Try booting in to Safe Mode.

If you can get in to Safe Mode, disable any new devices you have recently installed, reboot again, this time letting it try to boot all the way to Windows.

If it reboots again, go back in to Safe Mode and disable/uninstall something else.

Basically, it is a process of elimination. Safe Mode loads a very minimal set of system drivers, so if you can boot in to Safe Mode but not in to full Windows, the problem is one (or more...) of the drivers that load in Windows but don't load in Safe Mode.

Mar 19, 2009 | E-Machines eMachines Desktop PC

1 Answer

Problem with installing wireless card on a Emachines G520 with xp


by the device id your device is

DELL WIRELESS 1395 WLAN MINI-CARD for this go here

but emachine G520 xp sp2 driver are

here

and injoy

Jan 21, 2009 | Computers & Internet

1 Answer

Emachine 750 loads Windows XP, shows emachine picture and locks


try this reinstall ur windows from ur emachine recovery cd and this should help let me know if it does

Dec 04, 2008 | E-Machines eMachines Desktop PC

2 Answers

Only getting EMachines/Windows XP Logo when boot up T3882


you have not set the cdrom as first boot device in the bios (press F2 or Del on boot up to get in bios), choose cd as first boot device, save settings and restart the pc with your cd in the drive and then when prompted press enter

Aug 18, 2008 | E-Machines eMachines Desktop PC

Not finding what you are looking for?
E-Machines eMachines Desktop PC Logo

Related Topics:

130 people viewed this question

Ask a Question

Usually answered in minutes!

Top E-Machines Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

Are you an E-Machines Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...