Question about Lexmark Office Equipment & Supplies

1 Answer

Lexmark x2470-power light blinking, won't print

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Lezmark 2420m won't quit blinking

Posted on Feb 04, 2009

6 Suggested Answers

ginko
  • 19396 Answers

SOURCE: lexmark x2470 printer

You can get the User's Guide and other related documents here .
If you did not get the printer software cd, you will also need to download and install the drivers/software from here. Just chose your windows version.

Regards

Posted on Apr 02, 2008

yooperbud
  • 8637 Answers

SOURCE: lexmark X2470 printer wont print/connect time executable stopped

Normal 0 Driver could be corrupt.
Disconnect the printer or at least be sure it is turned off. I'd do both and reinstall the CD software program that came with the printer. When the software program asks you to connect the printer to the USB port, do so and it should again work properly.
Hope this helps. Bud

Posted on Jan 26, 2009

  • 23 Answers

SOURCE: LEXMARK X2470 wont print in yellow with new cartridge,

try to clean the base of cartridge and clean surface of cartrage and the base where it fits in to clean it too.

Posted on Jul 23, 2010

  • 906 Answers

SOURCE: Lexmark x2470 won't feed paper

Good day, this is my advise to you. press the power button off and firmly grasp the paper and gently pull it out and press the power button to turn the printer back on. hope it will help you.

have a nice day.

Posted on Jul 30, 2010

elix0411
  • 3530 Answers

SOURCE: aico exe has stopped working.

Please uninstall and reinstall the driver.

Step 1 Disconnect the printer from the PC

Step 2 Go to the Control Panel and click on Add/Remove Programs. Highlight any Printer Software that is listed here. Select Remove.

Step 3 From the Control Panel, click on Printers & Faxes. Right click the printer in question and select Delete

Step 4 Look at the Toolbar. Select File, then Server Properties. Look in the Drivers tab. Highlight the printers drivers listed here and click on Remove for each one.

Step 5 Reboot the PC. Do NOT reconnect the printer!

Step 6 Go to the website of your printer manufacturer. Look for the drivers for your model. Download the correct software. If there are no Windows XP drivers for your printer, try looking for ones for Windows 2000. In most cases these will do almost as well.

Step 7 Run the exe file you just downloaded. It should auto-start the installation program

Step 8 The software will tell you when to connect the printer.

Step 9 Once the software is installed and the printer connected, try a test page. It should be working now.

Please feel free to rate the answer or comment if you need further assistance.

Posted on Oct 06, 2010

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why is light blinking on on-off button?


The blinking light indicates that the printer is on power saver mode. The Power Saver Mode saves energy by lowering power consumption during extended periods of inactivity. However, if you try to print from your computer when the printer is on power saver mode, the printer should automatically wake up and prints the job. You can also manually wake it up by just pressing and releasing the power button. Thanks.

Nov 19, 2010 | Lexmark X2470 All-In-One InkJet Printer

1 Answer

I have a lexmark x2470 printer.i would like to know whether it as one cartidge or two cartridges.please let me know if it is available in indaia


HI,

Please note that the #2 cartridge is the starter cartridge and the after market cartridge is the #1 cartridge.

The Lexmark X2470 printer uses the #1 cartridge which prints both color and black accordingly. While printing black it uses processed black. Hence, to print color images in "Black Only," please follow the steps given below:
1. Click on "Start," "All Programs," "Lexmark X2470 printer" group and then "Lexmark Photo Editor."
2. Click on "File" and then "Open" to select the color image file.
3. Click on "Image," "Mode" and then select "Grayscale."
4. Click on "Print."
This will print the image in gray.

Sep 15, 2010 | Lexmark X2470 All-In-One InkJet Printer

1 Answer

Lexmark x2470 won't feed paper


Good day, this is my advise to you. press the power button off and firmly grasp the paper and gently pull it out and press the power button to turn the printer back on. hope it will help you.

have a nice day.

Jul 27, 2010 | Lexmark X2470 All-In-One InkJet Printer

1 Answer

LEXMARK X2470 wont print in yellow with new cartridge,


try to clean the base of cartridge and clean surface of cartrage and the base where it fits in to clean it too.

Jul 23, 2010 | Lexmark X2470 All-In-One InkJet Printer

1 Answer

Green light blinking, won't turn off and can't print anything


unplug your usb or any cord that links to your printer...
then press and hold the power button of your printer (it should force your printer to shutdown)

then plug-in your usb cord (connector/cable) back to your computer then turn in you printer again... wait for your computer to recognize it

(note the green light blinking is an indication that the printer is busy) therefore you should wait for it to be recognize (note: a sound maybe heard once your computer recognize it, some may appear as pop-up)

it should be ok now make sure you still have ink in your cartridge

Jul 07, 2009 | Lexmark X2470 All-In-One InkJet Printer

1 Answer

Cannot print and fax using Lexmark x2470 All-inOne Center


Hello chiengeric,
Re-install the driver by using the original CD, if you need the driver over internet just Click Here and write 2470 on the search form .. then download the driver and enjoy your printer again.
Thank you for using FixYa.

Apr 04, 2009 | Lexmark X2470 All-In-One InkJet Printer

1 Answer

Lexmark X2470 printer wont print/connect time executable stopped


Normal 0 Driver could be corrupt.
Disconnect the printer or at least be sure it is turned off. I'd do both and reinstall the CD software program that came with the printer. When the software program asks you to connect the printer to the USB port, do so and it should again work properly.
Hope this helps. Bud

Jan 04, 2009 | Lexmark X2470 All-In-One InkJet Printer

2 Answers

How do I change the ink cartridge in my Lexmark x2470


How to Install or Replace the Ink Cartridges in the Lexmark i3 ID: 810 This document does not apply directly to your Lexmark X2470
  1. Make sure that plain paper is loaded in the paper tray.
  2. Ensure that the power light is on.
  3. Open the cartridge door.

    pattlnk_2112005_1715-810_cartridgeinstall1_i3_enfigs.gif

    The cartridge carrier may move slightly, and then return to the loading position.
  4. Push up on the cartridge lever.The cartridge holder springs open.

    pattlnk_2112005_1716-810_cartridgeinstall2_i3_enfigs.gif
  5. Remove the old print cartridge and dispose of it.
  6. Remove the sticker and transparent tape from the new print cartridge.

    pattlnk_2112005_1716-810_cartridgeinstall3_i3_enfigs.gif

    Warning! Do not touch the gold contact area on the print cartridge.

  7. Install the new print cartridge as illustrated below. Insert the cartridge into the carrier slot. Push the cartridge lever back to secure it under the cartridge hook. Press the cartridge lever down until it snaps into place.

    810_cartridgeinstall4_i3_enfigs.gif

    Insert the color cartridge in the front carrier slot.
    Insert the black cartridge in the back carrier slot.
  8. Close the cartridge door.
  9. On the PC, open the Lexmark i3 Solution Center and click Print Cartridges.
  10. Then click Print Cartridge Installation and follow the on-screen instructions to install the cartridges.

Please Rate the solution.

All the Best
Sammy

Sep 26, 2008 | Lexmark Office Equipment & Supplies

2 Answers

Lexmark x2470 printer


we have a link on how to fix your own printer through this link(check for search box further down page)

Feb 27, 2008 | Lexmark X2470 All-In-One InkJet Printer

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

481 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts

Roopesh S
Roopesh S

Level 2 Expert

228 Answers

Sanath Kumar V

Level 3 Expert

684 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18330 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...