Question about Innovage 1502084 Corded Phone

2 Answers

Innovage Speaker Phone

Just purchased and hooked up corded LCD Innovage speaker phone. Problem is when call received and answered on another phone in home, there's a continuous tone sounded overtop of the caller's voice. This doesn't occur if you answer on the call on the Innovage phone or if you disconnect it from the land line. Any suggestions?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 4 Answers
Re: Innovage Speaker Phone

I suspect a polarity problem in the wiring at one of the phones. If you have a security system incorporated in your phone that too could create a problem

Posted on Sep 07, 2007

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: Innovage Speaker Phone

This is exact problem I was having. Just purchased phone about a week ago, 5/07. I took it back. I had phone company come out and it was this phone. I took mine back, but I would like to have one for the features if I could solve this problem.

Posted on Jun 02, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Instruction manual for speaker phone generation gm-7826

Jan 19, 2014 | Innovage Speaker/Caller ID* LCD Touch...

1 Answer

I have a Shift 3 lcd touch panel phone with 12 digit calculator.I cannot find the manual for this phone.I can receive calls but cannot call out.A manual would be helpful Thanks

  • Check your phone to make sure it is set up properly. Open the back of the phone by pressing your fingertip on the small lever that opens the battery area. The battery cover will come off in your hand. Insert three "AAA" batteries into the back of the phone so you can use the night light feature. Replace the battery cover by sliding it into the battery area and clicking it into place with your fingers. Connect the phone to the telephone phone jack by connecting one end of the wire to the phone and another end to the wall jack. Connect the handset to the phone by inserting the end of one end of the curly phone wire to the handset and the other end into the side of the phone. Listen to the dial tone by pressing the speakerphone or picking up the handset to make sure your Innovage LCD touch panel phone is connected.

  • 2

    Review calls you missed. Use the up and down arrows on the Innovage LCD touch panel phone to view the caller ID phone numbers.

  • 3

    Use the night light to view the Innovage LCD touch panel in the dark. Slide the switch on the front of the panel to turn the night light function on. Slide the switch to the off position to turn the night life off.

  • 4

    Adjust the volume on your speaker by selecting the speaker loudness that you want. Press the hands free button once and press the "Delete" button. Choose a loudness from one to four.

  • 5

    Press the hold button on the front of your Innovage LCD touch panel phone. This will activate the hold function when you are on a call and it will allow music to play while someone is on hold. The hold music is built in to the phone and will automatically play when you press hold.

  • 6

    Save a phone number as a VIP number on your Innovage LCD touch panel phone. Press set and save when an important number comes onto your caller identification. This makes it harder to delete the phone number by accident.

  • Read more: Innovage LCD Touch Panel Phone Instructions '

    Sep 23, 2011 | Innovage Speaker/Caller ID* LCD Touch...

    1 Answer

    Music on phone through speaker when receiver is on the hook

    You can press SPEAKER - 725 - SPEAKER from any phone to hear the music or cancel the music.

    Oct 21, 2008 | NEC Dterm DTP 16D-1 Corded Phone

    1 Answer


    sent you an email of my manual. hope it helps.

    Jun 03, 2008 | Innovage Speaker/Caller ID* LCD Touch...

    1 Answer

    Speaker volume

    hi fshmol, press the HANDS FREE button, press delete to select LOUNDNESS (1-4), then press HANDS FREE to confirm, then DELETE to exit to main view.

    May 16, 2008 | Innovage Speaker/Caller ID* LCD Touch...

    1 Answer

    Phone displays and answering machine question

    sorry, not my area of expertise. Try asking one of the other techs.

    Mar 25, 2008 | Innovage Speaker/Caller ID* LCD Touch...

    2 Answers


    LCD screen only displays information when phone is off the hook, goes blank when you hang phone up.

    Aug 02, 2007 | Innovage Speaker/Caller ID* LCD Touch...

    Not finding what you are looking for?
    Innovage 1502084 Corded Phone Logo

    Related Topics:

    130 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Innovage Phones Experts

    Ronald Tyler
    Ronald Tyler

    Level 1 Expert

    26 Answers

    Mike Neath
    Mike Neath

    Level 3 Expert

    315 Answers

    Cindy Wells

    Level 3 Expert

    4722 Answers

    Are you an Innovage Phone Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides