Question about Fisher and Paykel DEIX2 Electric Dryer

2 Answers

Disconnected green wire at base of dryer

Its a fisher and paykel DEIX2 dryer. the green wire is connected on the inside but there is a metal clip on the other end. Is this just a gound wire that needs to be attached to the case? I just need to know where it goes. I just bought the thing.

thanks

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I need to take the ground wire off of my dryer so I can hook up the 4 prong cord how do I take this off do I have to take the dryer apart

Posted on Jan 02, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 706 Answers

Hello krebello13,
In almost all cases, a green wire is a ground wire that bonds frame members or removable panels to earth ground. This provides the user with maximum protection against electric shock since the sheet metal is at ground potential regardless of whether it has been detached from the chassis. So.. YES..that is a ground wire with a clip that was probably attached to the frame. Most codes require a ground wire afixed to any panel that can be removed but has voltage on it so that it is never electrically 'floating'.. Hope this helps you..
Regards
Rick

Posted on Nov 24, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fisher Paykel DEIX2 electric dryer parts list


If you need parts manual and to order parts go to www.coolblueworld.com Thats the official website.

Aug 31, 2012 | Fisher and Paykel Dryers

1 Answer

It is making a loud sqeaking noise when running and if you look inside of the drum it has a wear pattern on it


Unplug The Dryer! I took my panels off a squeaky dryer and had to pull the drum out and Vaseline the shaft and the hole it come out of, keep track of some wires you may have to pull off, so you slip'em on in the same places you pulled em from,put it all back together and if done correctly you'll have your peace while doing laundry again. good luck

Jan 15, 2011 | Fisher and Paykel DEIX2 Electric Dryer

1 Answer

The model of my Fisher Paykel dryer is DEIX2 and it runs but doesn't get hot. It's four years old. Would it be cheaper to replace than repair? Thanks.


Hi,

If you are having problems with your gas dryer not heating the most common problem is that the ignitor goes bad. Even though it glows sometimes it is still not working properly.


if you dryer is gas check out this gas no heat tip....


If you have an electric dryer, you can have many different things that can go wrong causing the dryer not to heat.


check out this electric no heat tip...


heatman101

Jan 04, 2011 | Fisher and Paykel Dryers

1 Answer

How to replace drive belt on Fisher Paykel deix2 ?


dryer runs too long doesn't seem to want to shut off automatically when clothes get dryer

Oct 30, 2010 | Fisher DEIX2 Dryer

1 Answer

Looking for a parts list for a Fisher Paykel DEIX2 dryers


DEIX2 - one of the heat coils remains hot after dryer stops. I can see that it is still red (hot) after dryer is turned off. I need to unplug dryer for it to go off.

Oct 14, 2010 | Fisher and Paykel DEIX2 Electric Dryer

1 Answer

My fisher paykel DEGx1 dryer top load is only blowing cold air


Could be something simple like a limit popped due to clogged vent or a open heating element. DEGx1 Service Manual

Jul 22, 2010 | Fisher and Paykel DEIX2 Electric Dryer

1 Answer

Fisher Paykel Dryer is taking 3 hours to dry(DeIX2)


Check your cvent going outside. also check to see if the vent is smashed. try using the time dry cycle and see how your clothes turn out. if they are still wet or damp. you have a heating problem. try those solutions.

Oct 19, 2009 | Dryers

2 Answers

Fisher & Paykel front loader dryer ED56AU


What about the lint sensore, it may be faulty, sending a signal of a fire hazard.

Aug 11, 2009 | Fisher DEIX2 Dryer

1 Answer

Dryer won't turn. have cleaned & belt seems fine. electronics seem fine as well. when turn on only get a hum, nothing else. model fisher & paykel ED56AU. Any ideas? Thanks, Greg


the rollers (?) that turn the drum might need some lubrication ---- same thing happened to me and the tech removed the rollers (?? don't know the right word) and lubricated them ---- all working fine now

Jul 11, 2009 | Fisher DEIX2 Dryer

1 Answer

Fisher & Paykel DEIX2 Online repair manual?


I couldn't find one either. I would like to know what the different codes mean. Can anyone help?

Apr 01, 2008 | Fisher DEIX2 Dryer

Not finding what you are looking for?
Fisher and Paykel DEIX2 Electric Dryer Logo

Related Topics:

282 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fisher and Paykel Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Tim Whalen

Level 3 Expert

3056 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Are you a Fisher and Paykel Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...