Question about Yamaha HTR-6130 Receiver

4 Answers

Yamaha HTR-6130 Front right and left speakers with no sound

I purchased the Yamaha HTR-6130 about 3 months ago, but now the front right and left speakers have no sound. I checked the wiring, tested the speakers by switching to another termianl and went completely through the instruction manual on setup (including reintialized the receiver to factory settings) without any results. Should I send back under warranty or is there any other settings or testing I might have missed? Any help would be appriciated.

Thanks
DWT

Posted by on

  • 2 more comments 
  • Anonymous Nov 26, 2008

    same problem here

  • krys-n-jer Dec 02, 2008

    same here there is sound in the surround speakers, the center and the sub but nothing in the right and left fronts. also i have a 1080 up convert dvd player and when i run it through the av reciever i have no sound and i keep loosing the picture every now and again. but when i run it staight through to my tv its fine. is there even a tech support phone number? i coulden't find one

  • Anonymous Dec 18, 2008

    I have same problem, no sound from front speakers. Even there is no static sound during speaker check from receiver. ( center one is o.K)

  • Anonymous Mar 23, 2014

    first said check speaker wires, now just turns off after 3 seconds

×

4 Answers

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

As simple as this sounds, try hitting the speaker a/b button on the front of the unit, next to the headphone jack. I had the same problem, and was about to package the whole thing back up and go back to Best Buy when I hit this button and then the audio test worked.

Posted on Dec 05, 2008

  • Joe Sloan
    Joe Sloan Dec 11, 2013

    This fixed it for me. My 2 year old son must of hit the button. Thanks.

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Our Yamaha 6130 - 5 Channel setting was not playing through our L Front & L Surround Sound Speakers. We realized that when buying our new TV we forgot to connect a simple audio/visual cable between the DVD Player and Receiver. When we plugged the RED audio/visual cable to the Coaxial input on the DVD Player & Receiver, it worked!

Posted on May 14, 2012

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Thanks i appretiate the help

Posted on Dec 04, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 107 Answers

Look at the same model I was posted earlier how to initializer the receiver however this unit require to update firmware if your unit is still under warranty bring back to Yamaha or service center for Yamaha they will update for you. Due to confidence I can not post that update for you
Cheers

Posted on Dec 03, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Yamaha rx850 stuck on tuner mode and volume nob has a blinking light no sound mybe stuck on standby mode?


Are any of the buttons stuck on/in , which would jam the processor?
Maybe the tuner button stuck in? Try spraying them with switch cleaner on the front. If not.
ELECTREPAIRUSA@ELECTREPAIRUSA or you can contact us at that address as we repair/renovate all items electronic and electrical old and new.

Jan 07, 2017 | Yamaha Audio Players & Recorders

1 Answer

No center channel sound on my Yamaha receiver


Is the center channel amp blown? How about checking the center channel input wire for signal?

Jan 06, 2017 | Yamaha Audio Players & Recorders

1 Answer

Need information on where to purchase the remote controls for my Budweiser speaker tower


What is the make and model We can provide one.
ELECTREPAIRUSA@ELECTREPAIRUSA or you can contact us at that address as we repair/renovate all items electronic and electrical old and new.

Mar 05, 2016 | Audio Players & Recorders

1 Answer

How to connect speakers to sony dts receiver strde935


The front and centre speakers need bigger cable, so the 3 pair of connectors can take thick wires. The satellites need tulip plugs, because they need less power. c7118031-3f7f-4f21-84a9-bff8010fd3d2.png

Jul 09, 2014 | Audio Players & Recorders

2 Answers

I have a Rowe R80 jukebox and after moving it it has no sound through the speakers I am in New Zealand


Well, in addition to all the fine suggestions that are here, I would like to add the simple and easy things that may have happened during the move.

IF YOU ARE NOT GETTING A LOUD POP WHEN THE MACHINE IS POWERED ON.......

1) Make sure that the wires on the terminals below are still connected to the screws. There is one ground and one each for left and right. The lower the tap the lower the (max) volume of the jukebox.If they are not connected there will be no sound.
84c9065c-b7c6-4417-be21-0be7a6e74b41.jpg


There is a jumpers on the terminal strip where the volume control connects. Make sure that these connections are correct and tight. Also make sure that the jumpers did not fall off.
c1d72051-525d-47ec-8725-a6a8e655b20c.jpg
7a25e260-d39b-4992-8bce-8c2d2c9b07e5.jpg

If you are getting the loud pop in the speakers when the power is turned on .....

Check the plug on the side of the mechanism, just below the back of the tone are.(looks like a little tube socket) Check to see that it is connected to the mech and the CORRECT PLACE on the amplifier. It mat be possible to have this end in the wrong place. bf77613e-82a3-4e37-b8fe-cc80f4d4dbcb.jpg

Check all all your connections against the pic.

I hope this was helpful.

Mar 24, 2014 | Audio Players & Recorders

2 Answers

Hi,Just purchased 2 antec gain Bluetooth receivers type bxr 100. Operating instructions are not included. Maybe it's just me, but i'm not succeeding in getting them to work. No lights at all when they


Make sure that the unit is fully charged by a micro USB the light on it will be red until it's fully charged put phone in search mode and press the center button until the light flashes red and blue after the phone finds it you should have an option to auto pair when it's not in use it will turn off when paired and working pressing either track button will start the music player then just play with the buttons and see what it does you can stop anything from the phone controls

Mar 18, 2014 | Antec BXR-100 Gry Audio...

1 Answer

HMDX Jam wireless speaker cannot be paired with my computer


Go to your Bluetooth settings, go to the "Audio/Video" tab, under the "Content Protection" section uncheck the "Connect to content protection enabled headset only" and your bluetooth speaker(s) should now work.

hmdx-jam-wireless-speaker-cannot-paired-545ferrkqkuowltb2dothasu-3-0.jpg

Feb 02, 2013 | Audio Players & Recorders

2 Answers

Connect an active soundbar to a receiver


What if the soundbar is Bluetooth? Will I still be able to use that function and connect the active soundbar to the tv (Bluetooth) and connect the av receiver for other surround sound speakers? (they are pre-wired in the walls in the apartment I moved into)

Jan 08, 2013 | Audio Players & Recorders

3 Answers

Front two speakers not working at all


Hit the the speakers A/B/Off button on the receiver. If you plugged the front channels speaker wire next to the center channel on the back of the receiver make sure its showing B. If you plugged them in the banana plug part, make sure its showing A.

Apr 12, 2007 | Audio Players & Recorders

Not finding what you are looking for?
Yamaha HTR-6130 Receiver Logo

1,721 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

4678 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

The Knight
The Knight

Level 3 Expert

69570 Answers

Are you a Yamaha Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...