I wont take the cd the display screen reads cd reset what does that mean ?

maybe the amplifier system is locked!!!
the means that you have to reset or restart it

if you mean the screen freeze wont turn off , this is normal the display will only update if a reading greater than .10 has been measured between samples , i had same problem when measuring diff fish tanks with this probe , ive had to develop a dilution process to get readings for tanks instead

I had a similar problem with my NSX-999. For CD, u need to clean the laser or buy a new cd-laser pickup KSS-210A.
For dim display, replace capacitor C107 and C108 in the mainboard if u know how or take to a repair shop and ask them to replace those two capacitors. It soled my problem

Have you tried resetting the unit? Remove faceplate and push the reset button with a ball point pen. If it's a bluetooth model there is a different procedure.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/mark_b53a7494531bf96d

Have one solution which might work.
Remove head display unit and press reset dutton usins a pin.
now connect head display unit. now insert CD. make sure the CD is in good shape.

Cheers
Alex Victor

If its not an original disc, meaning if it was copied or burnt, then this will happen. However if it is in fact an original PS2 disc, then I'd suggest taking it out, cleaning and trying again.

Usually, protect mode is enabled when the speaker output wiring has shorted together or is touching ground/+12V. I would verify that none of the speaker wiring has come loose.

We have the same problem and are searching all over the web for a solution but no luck. If we find a solution we will come back and post what we found. :)

I know that Panasonic provides chips, optics (laser),etc. to Emerson. I am familiar with the problem you've experienced because I've had a Panasonic CD Player. If the disc doesn't spin (as you said), the problem must be that your shelf system probably has an optical problem (laser problem/pickup problem) and will need to be serviced.

check out this link I think this information will help you. http://www.ledcar.com/pdvdh07/