Question about Jensen JER-422 Universal Remote Control

1 Answer

I lost the instruccions, I know my Tv code for it, but I don´t know the steps..

I lost the instruccions, Although I know my Tv code for it (is a LG)I don´t know the steps.. First I turn on the tv, then I press the device button of the control (tv) waiting for the green light to appear but this never happens, what could be the problem? Thanks

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 944 Answers
Re: I lost the instruccions, I know my Tv code for it,...

These claim to be the instructions - sorry no luck with a manual 1. Turn on the component 2. Press and hold the component key (TV, DVD, VCR-AUX, SAT-CBL) The illuminated on-off key turns on and stays on 3. While holding the component key down, press and hold the ON-OFF key. The illuminated ON-OFF key turns off. 4. After holding down both keys for three seconds, the illuminated ON-OFF key turns back on. 5. Release both keys. The illuminated ON-OFF key remains on 6. Press and release the ON-OFF key repeatedly until your component turns off. Wait four seconds between each keypress. Each time you press the ON-OFF key, the illuminated ON-OFF key blinks, and the next code in the list is sent. This process continues until all of the codes in the code lists have been searched. If your component turns off, you have found the correct code. (If it cycles through and the illuminated ON-OFF key blinks four times and turns off, all codes have been search. The manual code search method is exited.) 7. Once you have found the correct code, you must save the new code by pressing and releasing the STOP key. The illuminated ON-OFF key turns off. You must press the STOP key to save the code or the correct code will not be saved. 8. To confirm that the component is programmed with the correct code for max functionality, test the component. Attempt to control a variety of the component's functions with the remote. If some of the features of your component do not work try programming the remote with a different programming method. Be sure to retrieve the code your remote programmed. here's the link there might be other useful info Hope this helps :)

Posted on Mar 14, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

My dish remote does not work on my new RCA tv. How do I fix that?

Hey Vernon Long,

We would have to program your remote to your RCA TV. I have provided the steps to program the remote below along with a few codes to try. You can view the link provided for more codes if the ones I list don't work!


Codes: 502, 646, 633

Addressing Remote to TV:

1.) Press and hold the clear TV button until all mode lights light up.
2.) Release and TV light will be blinking.
3.) Enter code and press #. The TV button should flash 3 times.
4.) Try functions (Volume, Power, etc..) and see if working.
5.) If no function, repeat steps 1-4 with another code.

Our remotes aren't guaranteed to work all types of equipment, but if the codes don't work let me know here and I will try some more steps with you!

Tommy Faust
DISH Network

Nov 05, 2011 | DISH Network IR Remote Control

1 Answer

I have a LG TV & need code for one for all remote URC3021B00

LG started out as Goldstar, merged with Lucky Corp., to become Lucky Goldstar, LG ;-)

Although your remote doesn't list any codes for LG, one of the Goldstar codes may work.
Try 0030, 0056, 0178.

If that doesn't work you may have to try the "Search for Code" feature by first turning your TV on, then follow these steps:

1.On the remote control, press TV once
2.Press and hold SET until the LED (red light) blinks twice,
then release SET.
3.Enter 9 - 9 - 1.The LED will blink twice.
4.Aim the remote control at the TV and slowly alternate
between pressing POWER and TV. Stop when the TV turns off
(after pressing POWER). If the device does not have a Power
key, you can substitute another function, such as digits 0 ~ 9 ,
CH, or PLAY).
NOTE: In the search mode, the remote control will send IR codes from
its library to the selected device, starting with the most popular code
5.To lock in the code, press and release SET.The LED will
blink twice.

The URC-3021 is a 2004 basic model without any learning capability, if you are unable to find a code, it may be time to buy a new remote.
There are newer, low cost universal remotes available at Walmart, Target, K-mart, and other retailers, that should have a more up-to-date code list.

Hope this helps, Greg

Jul 29, 2009 | One For All URC-9910 LCD Remote Control

2 Answers

I have a new RCR312W TV remote. I have lost directions

Someone had posted a solution to manually program the remote. The information came from RCA website. It worked fine. I still would like the code numbers for my remote. I have a LG TV that is about a year old.

Feb 14, 2009 | RCA Universal Remote Control

2 Answers

Remote tv control

The model number you gave isn't recognized by either Samsung at their download center and sells the remote, they also do not have a part number on the 'Original Codes' page that even resembles that part number:

Since codes are so model and brand specific, unless you find the user guide on line, your chances are slim. Study the remote to see if it may have a built-in scan feature that allows you to step through every available code to find one that works.

Sep 22, 2008 | Samsung Remote Control

1 Answer

Codes and instruccions

hold the tv button the red pwr light should go on then type in the first code the pwr button should turn on again. then try pushing the vol button up and down (any button will do) if it doesn't work then try the next code following the same steps
1004, 1048, 1049, 1073, 1080, 1162, 1169, 1180

Apr 10, 2008 | Jensen 143307 Remote Control

8 Answers

Sky+remote code for my lg tv

The cose you need is 0206

Sep 15, 2007 | Remote Controls

Not finding what you are looking for?
Remote Controls Logo

185 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jensen Remote Controls Experts

The Knight
The Knight

Level 3 Expert

66685 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

Mike McWhinney

Level 3 Expert

537 Answers

Are you a Jensen Remote Control Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides