Question about Sony KP-57WS500 57" Rear Projection Television

Open Question

Ghosting on hdmi sony KDF50E2010 whilst using xbox 360

Posted by on

  • Anonymous Nov 23, 2008

    i get ghosting when using xbox306 and dvd player although it`s more noticable on the xbox i am using new hdmi connections can anyone help please

×

3 Suggested Answers

welcomejee
  • 10594 Answers

SOURCE: help

Hello,
HDMI function works with all those components who have HDMI port in it. I dont know I made my point clear or not.

Posted on May 28, 2008

  • 603 Answers

SOURCE: ghosting on hdmi channel on my sony bravia

With HDMI there should be no ghosting. And being a Sony Bravia it should be no ghosting. My 52" Sony is great.
You've got connection issues.

Posted on Nov 25, 2009

  • 1 Answer

SOURCE: My Sony Bravia KDF-E50A12U has a ghost effect when

Ok, firstly, disclaimer.

This "solution" utilises a "service" menu, that only trained engineers should use. You are not one, you are an "end user". biggrin.gif So am I, but I paid attention. wink.gif

Use of this information is entirely at your own risk, you mess up your telly, it's your own silly fault. Don't go messing with stuff in there you don't know about.

Ok.

To bring up the "service" menu, put the TV in standby mode, then press in sequence :

Onscreen Display ( the little screen with the i+ in it )
5 ( channel number 5 )
Volume Up ( upper end of volume button )
Analogue ( middle top button )

The TV should switch on and when it's warmed up, you should see a screen with lots of big green lettering on it.

Press the "menu" button ( middle bottom )

Use the direction dial to move down to "LCD Drivers" and press right on the dial to enter this menu.

Move down to "S H Pos Reg R". It should be "10", change it to "11". ( Left/Right to adjust )
Move down to "S H Pos Reg G". It should be "10", change it to "11".
Move down to "SHPos Reg B". It should be "10", change it to "11". (it's on the next "page", keeping scrolling down the menu)

Press the menu button to drop out of the menus, and the standy button to drop to standby. Switch back on, and hopefully your ghosting will be gone.

Posted on Apr 01, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How should I connect a Sony Wega KF-50WE620 to an XBox360 ?


Since the TV accepts HD signals only via DVI and component inputs, the only logical way is to use the "Xbox 360 Component HD AV Cable" as show in the link below:

How to hook up your Xbox 360 or Xbox 360 to TV

The TV will not accept a VGA input. A cable converting HDMI to DVI would also require that you break out the L + R audio channels, too. The one I mentioned above does this all for you with no degradation in video signals.

Mar 26, 2015 | Sony Grand WEGA KF-50WE620 Television

1 Answer

How do you get your xbox 360 to play, on a 65'' mitubishi projection tv,its connected but nothing comes on screen when i put a movie in just a blank screen and no sound,if i'm on a channel,the channel...


Hello

The Xbox 360 connects to a TV using either

- COMPONENT (red blue green for video, red and white for audio

- COMPOSITE (yellow for video, red and white for audio)

- HDMI

So, if your TV is on a "Channel", it is not on the correct input to view the Xbox 360.

Check the Xbox and verify which cables it is using to connect to the TV. When you find this, follow the cable to the back of the TV and find the input selection. It should be listed as the type and a number (i.e. HDMI 2, COMPONENT 1).

Have the Xbox on. Use the TV remote and use either the INPUT or the MENU options to change the input to the input that matches the port that the Xbox is connected to.

This should make the Xbox work.

When you are done with the Xbox, use the INPUT or MENU to change back to the tuner to watch TV.

Nov 03, 2013 | Mitsubishi WD-73734 73" Television

1 Answer

My WD-60735 doesn't recognize my xbox 360 in HDMI or AV. DVD player works fine in AV, Xbox works fine in HDMI and AV on another tv. Just goes to blue screen on this tv.


have you set your settings for 720p on your xbox then turn the tv on to the right input then turn the xbox on? i had that issue with a previous tv? does the lights on your xbox just spin around?

May 14, 2011 | Mitsubishi WD-60735 Projection Television

1 Answer

Ghosting on hdmi channel on my sony bravia


With HDMI there should be no ghosting. And being a Sony Bravia it should be no ghosting. My 52" Sony is great.
You've got connection issues.

Nov 25, 2009 | Sony Televison & Video

3 Answers

I can't get my Xbox 360 to work over HDMI anymore, but other HDMI devices work and the Xbox 360 also works with other TVs over HDMI.


Reset your TV, try unplugging it for a while, if that doesn't help, try restoring or resetting it to defaults, there should be a function for that somewhere in the menus of the TV. that should solve the issue, if it still remains, check the cables and if possible try another hdmi port.

Nov 10, 2009 | Televison & Video

1 Answer

On my PT-50DL54 the HDMI HDCP stopped working


Try unplugging the television for 10 or 15 minutes and try again.

Apr 30, 2009 | Sony Grand WEGA KF50WE610 50" Rear...

1 Answer

Convergance issue on one AV input only


This is not a convergence problem in the traditional sense as it would effect all inputs not just one. I would be looking at the video switching IC as the defective part. I'll look up your model to try to get you more details. Are you going to attempt the repair yourself?

Thanks,
Dan

Jan 05, 2009 | Sony KDF-50E2000 50" HDTV

1 Answer

Hello have a sony KDF 50E 2010 LCD PROJECTION TV. When I plug in my ps3 via hdmi get a ghosting picture also if i plug in my wii via scart ghosting on screen also happens. is this normal and can i rectify...


hi. i had the same problem with the hdmi lead. luckily it was still under guarentee, when the bloke came out to mend it. it was the settings that was wrong he changed some numbers on the remote and it works fine now. with the sound of it most of these tvs are set wrong for hdmi ..

Aug 04, 2008 | Sony Televison & Video

1 Answer

Help


Hello,
HDMI function works with all those components who have HDMI port in it. I dont know I made my point clear or not.

May 27, 2008 | Sony Grand WEGA KF50WE610 50" Rear...

1 Answer

GHOST IMAGE ON KP-43T90


this problem is caused by the pal 50 - 60 meg problem, the sony runs at 50 megs, if you have a 60 input from an hdmi lead you will get ghosting

Mar 05, 2008 | Sony KP-43T90 43" Rear Projection...

Not finding what you are looking for?
Sony KP-57WS500 57" Rear Projection Television Logo

Related Topics:

116 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

kakima

Level 3 Expert

98694 Answers

The Knight
The Knight

Level 3 Expert

69654 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...