Question about Pioneer VSX-D514 Receiver

1 Answer

Receiver won't power on

My receiver was turned on and plugged into a surge protector along with my LCD TV. The power went out and everything shut down. A few minutes later when the power returned, I turned the TV back on successfully, but when I tried to power on the receiver, nothing happened. I tried the reset procedure that is in the manual with no success. I looked at and tested the fuses and they are OK. The unit is receiving power as I felt the power surge when attempting to remove the fuses with the power plugged in (by mistake of course).

Posted by on

  • 1 more comment 
  • Anonymous Nov 18, 2007

    I am in South Africa. ESKOM our electricity supplier sucks !. The past two days we've had a couple of power outages and serious dips. Needless to say my Receiver VSX-D514 is not powering up. I've checked the fuses - none blown. I've also noticed that there is 110V power on the voltage (checked between red and gray, and black and gray) selector but no 240V reading (between red & black) - checked with a multimeter ! Please help !

  • Jessie Jo Dec 14, 2007

    We have the same problem with our VSXD514. Surround sound was plugged into a surge protector along with TV and other electronics. The power went off during a storm and when it came back on everything worked except the D514S. It will not power up.

  • sofs Mar 07, 2008

    Have sme problem except mine happened while hooking up an input live. have tested transformer and there dosnt seem to be any voltage on secondary side have know idea how to fix short of replacing ther must be an easy fix as it describes this problem in the manual but says to take it to a service agent.

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My receiver was turned on and plugged into a surge protector along with my LCD TV. The power went out and everything shut down.

Posted on Jun 03, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can I get Dynex TV out of "protection mode"?


the protected mode kicks in when there is a safety issue with the receiver. This usually comes from an overload to the system via a short in the system or perhaps a surge in power. Your receiver shuts down, and you'll need to shut the entire system down to fix it.
In some older homes, some of the wiring doesn't deliver the "cleanest" power, delivering minor power surges to the items you plug directly into the wall. If your receiver is plugged directly into the wall, purchase a surge protector to stop this
Read more: http://www.ehow.com/about_5516888_problem-sony-receiver-protected-mode.html#ixzz2ZYa9W0Mi
God bless you

Read more: http://www.ehow.com/about_5516888_problem-sony-receiver-protected-mode.html#ixzz2ZYZm8THG

Jul 20, 2013 | Dynex 32 in. LCD Flat-Panel HDTV

1 Answer

My lg tv won't turn on after a lightening storm


Your surge protector did not function properly, contact the manufacturer of the power strip.

Jul 05, 2012 | LG 55 55LW5600 3D LCD TV

1 Answer

Tv does not turn on after a thunderstorm and several attempts at power returning to the home. The power went on briefly then shut off several times, now the television will not turn on. We had the tv...


Check the main fuse in the power supply, the TV also has small surge protection devices (MOVs) installed after the fuse, any surges the come along and big enough will cause the main AC fuse to blow. When you surge protector, EVERY connections must go through the surge protector, for example, the AC cord of the TV is connected to the surge protector, the cable connection did not go through the surge protection, the surge then can get to the TV through the cables.

If you are going to DIY and have proper tools, electronics knowledge, and know safety precaution then please read on:

Please see my basic troubleshooting guide here:
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide

http://s807.photobucket.com/home/budm/allalbums

http://en.wikipedia.org/wiki/Capacitor_plague

Parts: www.shopjimmy.com

Please post back what you find.

Jul 21, 2010 | Sharp Aquos LC-46D62U 46 in. LCD HDTV

1 Answer

My receiver turns off and on and trys to run a system update but when it is complete it turns off and you can here the fan blowing and then it starts the update again. It will only show the channel you...


Hello tsaucier, my name is MichaelHurst with DISH Network. Is your receiver plugged directly to the wall outletor to a surge protector/power strip? Unplug the DISH receiver for 10 secondsand plug back in. (It may take up to 5 minutes for the reset process to becompleted). Ifthereceiver is currently plugged into a surge protector, bypass the surgeprotector and plug the receiver directly into a wall outlet. If you are stillhaving issues try another outlet. If this doesn't remedy the issue then thereceiver will have to be replaced.

May 10, 2010 | DISH Network 311 DTV Receiver

1 Answer

No indicator light or power


Please look at these two links; I suspect your problem is related:

http://www.fixya.com/support/t4592070-tv_no_power_will_not_switch

http://www.fixya.com/support/t4596948-tv_stopped_working_bit_fizzing

This model seems to be having a ton of power supply problems.

Apr 20, 2010 | LG 42LC2D 42 in. LCD HDTV

1 Answer

Power surge hit my surge protector with my 'sony tv hooked to it.


Well, the power supply may be still damaged by the surge, what may happen is that when first surge happens the surge protector protect your TV by sacrifing itself but then the second surge comes along, since the protector already blown up then the surge will just come right through to the TV on the second surge. That is bad problem for the surge protector that sacrify itself but can only do it for ONE time.

Oct 31, 2009 | Sony BRAVIA KDL-46S2000 46 in. LCD HDTV

1 Answer

Ht-twz312 has no power!!!!!!


Tries diffrence power oulet with out the surge protctor.Still no power,ur power inverter board is dead.

Sep 22, 2009 | Televison & Video

1 Answer

42" westinghouse flat screen wont turn on


Some surge protectors fail just when most needed.

Jun 19, 2017 | Westinghouse TX-52F480S 52 in. LCD TV

Not finding what you are looking for?
Pioneer VSX-D514 Receiver Logo

Related Topics:

808 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5515 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Ian Summerfield
Ian Summerfield

Level 3 Expert

502 Answers

Are you a Pioneer Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...