Question about RCA RCU300 Remote Control

1 Answer

Old remote quit. Need factory replacement

The original remote has a button to turn off the "guide" page. I cannot turn this off any other way. To use the TV I must turn it on with the button on the unit itself.

Need new factory remote or a way to cancel the "guide" feature.

TV Model No. F19432
Serial No. 028626731

Remote model no. CRK171F1
RXE NO. 247050

Thanks

Posted by on

1 Answer

Try contacting www.remotes.com for a new factory original remote

Posted on Nov 26, 2008

  • Anonymous Nov 26, 2008

    try contacting www.remotes.com for a new factory original remote

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My remote won't work


Many remote controls freeze up and appear "Dead", but some can be instantly brought back to normal operation by following 4 simple steps.

Use these steps on OEM (original equipment) remote controls for TVs, DVDs, Audio Systems, Satellite and Home Theaters.
Note: If you follow these steps on a universal remote control, you will need your universal's owner's manual to reprogram it.

1) Remove all batteries from the remote
2) While the batteries are out of the remote, push and release every button on the remote control one at a time, until all buttons have been pressed and released at least once. This action drains the capacitors in the remote's circuits and causes the remote's brain to go back to factory defaults.
3) Re-install the batteries, taking care to insure each battery is installed correctly. Use new batteries if you are unsure about the batteries you removed.
4) If this Remote Re-Start procedure is going to work, your remote should now be back to normal. Try it.
If your remote works, Great. If not, you can shop for a new OEM remote control at Remotes.com 1 800 Remotes Factory original replacement remote controls
If you need codes for Universal remotes REMOTE CODES COM

Feb 29, 2016 | Remote Controls

1 Answer

I have try several times to connect my Welby big button remote control to my Panasonic TV.I have the codes of the TV but I can't get it to work.can someone guide me thru.I will appreciate it.


[PDF]Big Button Universal Remote Control User's Manual

www.magnifyingaids.com/pdfs/Big-Button-Manual.pdf
Big Button functions just like your original remote ... On the remote control, press and hold the MODE button (TV, VCR, CBL/SAT or. DVD) until the .... Q. Why won 't my Big Button work? A. Make .... PANASONIC 008, 051, 057, 076,. 149, 247 ...

[PDF]Big Button Remote Control Set-up Codes - ValuNet

myvalunet.com/.../Remote-Control-Big-Button-Remote-Set-up-Codes.pd...
Innovative System's Big Button Remote Control ... TV. Quick. Number. Manufacturer/. Brand. 0. SANYO. 1. SONY. 2. SANSUNG. 3. LG. 4 ... PANASONIC. 6.

Remote Control Setup, Codes and User Guides - FiOS TV ...

https://www.verizon.com/.../tv/.../remote+contr...

Verizon CommunicationsThis page provides links to setup instructions, remote control codes, user guides, ... No code for my device ... Want to buy the Verizon P283 Big Button remote?

Amazon.com: Gmatrix Big Button Universal Remote Control ..


Dec 14, 2015 | Panasonic Remote Controls

1 Answer

Tv setup page


The solution is to replace the Teknika remote which has the necessary button to initiate set up.

Jan 23, 2014 | Remote Controls

1 Answer

How do i turn on the caption with universal remote RCr311W to a sanyo tv moel#DS27820 ?


Here is the link to the User's Manual for that universal remote control:


http://www.voxxsupport.com/images/User%20Manuals%20-%20FAQ's/RCR311W_DOC_OM.pdf


Unfortunately there is no dedicated button on that particular universal remote for operating the Closed Captioning feature on your TV.


You can try using the MENU button on that remote in order to access the AUDIO OPTIONS on your TV. Then see if you can activate the CLOSED CAPTIONING from there. See page 5 of the above manual for instructions on how to operate the MENU button on that remote.


Otherwise you will have to use the original factory remote control that came with the TV, or go out and buy a more expensive / advanced universal remote control with all the additional features and buttons that you require.


Good luck.


Joe.

Dec 09, 2011 | Sanyo Remote Controls

2 Answers

My sansung remote quite working, replacement universal remote was programed to the tv but the tv will still not respond. What's next?


You likely don't need a new remote. Certainly not a Universal.

Samsung remotes for LED / LCD TVs are generally RF, not IR.
Most Universal remotes do not generate RF signals, so disregard advice about codes for Universals.

Try this:

First, fresh batteries, and clean battery contacts if needed.

Then, Try Pairing procedure:
  1. TV off
  2. Bring remote within 3 feet of TV
  3. Push Pairing button (Paper Clip or other pointed object in button hole)
  4. Turn on TV
  5. Should be paired. Try remote channel or other buttons.
  6. If not, try 2 more times.
  7. If still not working, push RESET button first and repeat Pairing.



Please rate if Helpful.

Good Luck !!



sansung-remote-quite-working-tiee3lbaghb4kteyvqjgelx1-2-0.jpg

Jun 18, 2011 | Samsung TV Remote Control

1 Answer

I want to buy a new one, any possible suggestion, where i can get one?


hello ging....go to this link http://www.remotes.com/ I use it quite often and the replacements are factory originals. Joe

Jun 05, 2011 | Sharp G1324SC Remote Control

1 Answer

The tv is stuck on a game channel and none of the buttons work such as the channel page, menu, select, guide, etc. I have replaced the batteries


Good day!

may I know if your remote is original or universal remote.

If your remote is universal you have set-up the remote code.Because universal remote is need to set-up every time it loose the battery or power.


If your remote is original and the battery is new.You have to do is replaced the IR sensor of your remote.

Thank you

May 28, 2011 | Hughes HRMC9 Remote Control

1 Answer

Cannot get channel guide to show


Besides the many features Osiris MX-350 provides as a universal remote control, it is also a learning remote.

If pushing the button doesn't have the expected result, e.g. pushing the GUIDE button on the remote doesn't bring up the channel guide, you can teach the Osiris with the original remote.

Instructions on teaching your remote a new command is included in the instruction manual.

Since I couldn't find a code for my Sony blu-ray player, I just taught the Osiris all the commands from my original remote in about 10 minutes.

Aug 16, 2009 | Universal Remote Control Osiris Complete...

2 Answers

Can RC65 remote replace the original RCA Remote for DirectTV?


http://shop.ebay.com/items/rca+universal+remote?_dmd=2&_cpr=249 this is a e-bay web page link for purchasing RCA universal remote controls. Here you will find all different makes and models of RCA remote controls. They are for immediate sale and for auction. You should find the model number of your old remote control and put the number into a search engine to find the replacement mode for your television.l.Once you have the model number you can go to the e-bay web page and find the model and purchase it. If you cannot find it there. Use the model number in the search engine to find places to purchase the replacement. I hope this information help you find a replacement remote control for your television. Thank you for using FixYa and have a nice day!

Mar 28, 2009 | RCA DIRECTV Satellite Remote Control

1 Answer

PROGRAMING A LOGITECH HARMONY ONE?


It looks like you are speaking about the soft keys when you are in the "watch TV" activity and you have a cable box. These buttons exactly match your original remote. In other words the "A" button on the screen of the Harmony will do the same thing as the "A" button on your original cable remote. If these buttons are not functional on your original remote or if your original remote does not have them I would get rid of them. This is done by logging into your software. Go to the activities page and you will see a link to "customize buttons" under the watch TV activity, click on that. You will then see a page with two tabs that will say "standard buttons" and "additional buttons". Click on "additional buttons" and you will see the "A" "B" "C" and so on. Click on the trash can icon and you will have reomoved that button.

As for programing favorites go back to the Activities page and click settings below the watch TV activity. Select "setup favorite channels and add icons" and click next. Now you are on the page where you can add your favorite channels. Have fun with this and pay attention to the hints on the right hand side.

Feb 06, 2009 | Logitech Harmony One Advanced Universal...

Not finding what you are looking for?
RCA RCU300 Remote Control Logo

Related Topics:

90 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Remote Controls Experts

The Knight
The Knight

Level 3 Expert

68427 Answers

andy williard
andy williard

Level 2 Expert

226 Answers

Cindy Wells

Level 3 Expert

4762 Answers

Are you a RCA Remote Control Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...