Question about Canon PIXMA MP150 All-In-One InkJet Printer

2 Answers

Canon MP150 - Error - E,2,2

The printer had not been on for 2 months till I installed a new ink catridge. After installing, I got the E,2,2 message. HELP

Posted by on

  • 1 more comment 
  • Anonymous Dec 12, 2008

    HELP!!!!!
    i have NO idea how to fix this.
    stink, i have no idea how to even change the ink cartridge -- and my kids lost the manual.


  • kwuj May 11, 2010

    The ink cartridges are "stuck" on the right hand side & not accessible. Any help would be GREATLY appreciated.

  • kwuj May 11, 2010

    How do i get the cartridge out to clean it??
    Thanks, in advance for your help.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

My ink cartridges are "stuck" on the far right side & not accessible. Any help would be GREATLY appreciated.

Posted on Dec 12, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 385 Answers

There is a strip at the back of the carrige unit that needs to be cleaned with a damp cloth!

Posted on Nov 26, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Anyone knows how to solve error 15 on canon printer mp150?


E15 Ink cartridge is not installed. Turn off the printer. Take out the ink cartridge and then reseat it. Turn the printer back on and see if it recognizes the cartridge. If it doesn't then try another new ink cartridge. Make sure its one from Canon and not a 3rd party refurbished one. If it still gives you the error message then that means the main board in the printer is bad and you would need to replace the printer.

May 22, 2011 | Canon PIXMA MP150 All-In-One InkJet...

1 Answer

Printer is asking for new ink cartridge - which


There should be a reset ink counter in the printers properties. There also shouldve been a message on the lcd about the new cartridges installed. If you didnt answer those questions and just continued with the printing you will get the error messages that your getting. The error should go away once you go into the properties and reset it.

Best of luck..

Jul 06, 2010 | Canon PIXMA MP150 All-In-One InkJet...

2 Answers

I have installed refilled cartridge but since the time i have refilled the cartridge and installed it the printer is showing error e-5 what to do.buying a new cartridge each time would be a costly...


Canon MP150

1) With the printer powered off but connected to a power source, press the Power button while pressing and holding the Stop/ Reset button.
2) When the Power LED is lit, press the Stop/Reset button two times while pressing and holding the Power button.
3) When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a service mode. (Waiting for menu selection)
4) When the LED lights in green, press the Stop/Reset button 4 times.

The above will get you to Service Mode (and clear the Waste Ink Counter if you wish) and is supposed to work for MP160 also.
Caution if your waste ink pad is full you could overflow if ignored.


Some of the new carts reportedly have fuses which blow if the ink gets too low, denying any further refilling.

To use refills, you will probably have to turn off your Status Monitor.
Go to your printer's Maintenance section.

Jun 27, 2010 | Canon PIXMA MP150 All-In-One InkJet...

3 Answers

Canon pixma mp 145 E4 problem


Dear Sir,

Error Code E4 = No ink.
Generally printer doesnt recognise refilled ink.
Try the to reset the ink catridges
by mp tool software,mptool reset the printers canon pixma series like MP150, MP160, MP170, MP180, MP450 and MP460.And there also facility to write and read EEPROM in the printer. Other excess this software is detect automatically installing printers in the computer.
Download Mp tool

i think it solves your problem,But the actual procedure and best solution is replace the ink catridges,according to canon new genuine canon ink catridges save your printer life also.
if you find any difficulty leave a feedback,we will glad to assist you


good luck

Sep 08, 2009 | Canon PIXMA MP160 All-In-One InkJet...

2 Answers

E5 problem


E5, says the ink cartridges are the wrong type, not properly installed, or not installed at all. You can't refill those without replacing the chip or resetting the chip. Many refilled cartridges just don't work...

Aug 27, 2009 | Canon PIXMA MP150 All-In-One InkJet...

2 Answers

My canon pixma mp150 is showing error 5?


E5 is saying that ink is not installed, generic cartridges, or not installed properly, If all those are good you could have a defective carriage assembly and need shop work.

Aug 10, 2009 | Canon PIXMA MP150 All-In-One InkJet...

2 Answers

Error code E-5


Found this, it may help you Procedure to reset Printer canon MP145 and Canon MP160 with Error Code Message for Printer Canon MP145 and Canon MP160, you can find error code message the end of this post:
1) With the printer powered off but connected to a power source, press the Power button while pressing and holding the Stop/ Reset button.
2) When the Power is lit, press the Stop/Reset button two times while pressing and holding the Power button.
3) When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a service mode. (Waiting for menu selection)
4) When the on/off lights in green, press the Stop/Reset button the specified number of time(s) according to the function listed in the table below.(Each time the Stop/Reset button is pressed, the LED lights alternately in orange and green, starting with orange.)note: press 4 times for waste ink counter reset.
The number of the Reset
button pressing
LED Function Remarks
0 time Green Power off
1 time Orange Service pattern print
2 times Green EEPROM print
3 times Orange EEPROM reset
4 times Green Waste ink counter reset
5) Unplug cable power. (for MP145 / MP150)
6) Turn Off Power. (for MP160)
Error Code :
E2-2 = No paper (ASF)
E3-3 = Paper jam
E4 = No ink
E5-5 = The ink cartridges are not installed or a non-supported ink cartridge is installed, or the ink cartridges are not installed properly
E8 = Waste ink absorber full, or platen waste ink absorber full
E9 = The connected digital camera / video camera does not support Camera Direct Printing
E14 = The Ink cartridges whose destination are wrong
E15 = Ink cartridge is not installed E16 - Ink remaining is unknown
E16 -E19 = Failed to scan head alignment sheet
E22 = Carriage error
E23 = Paper feed error
E24 = Purge unit error
E25 = ASF(cam) sensor error
E26 = Internal temperature rise error
E27 = Waste ink absorber full or platen waste ink absorber full
E28 = Ink cartridge temperature rise error -
E29 = EEPROM error
E33 = Paper feed position error
E35 15 = USB Host VBUD overcurrent error - USB
E37 17 = Abnormal motor driver error
E40 20 = Other hardware error
E42 22 = Scanner error

May 07, 2009 | Canon PIXMA MP150 All-In-One InkJet...

7 Answers

Canon pixma mp145


hi, i have problem.
my canon pixma mp145 can't operate. the alarm sign is ON and the light for black ink is blinking, and the sign e4 come out . any body can help me what to do?
thanks
rose, malaysia

Aug 18, 2008 | Canon PIXMA MP150 All-In-One InkJet...

9 Answers

Canon printer mp160 error msg 16 (e16) after replace catridge


try this PRESS STOP BUTTON FOR 5 SEC CAN FIX THIS PROBLEM

after that will adicated light alarm blinking them you can print if can't try turn off printer and turn on again.

Apr 17, 2008 | Canon PIXMA MP160 All-In-One InkJet...

1 Answer

Driver and troubleshooting


this is the link to download your mp150 printer drivers

http://www.canon-asia.com/index.jsp?fuseaction=support&country=IN

After installing the drivers the software will tell you the error report like paper jam, no paper, catridge ink low etc

Bye
Take Care

Apr 04, 2008 | Canon PIXMA MP150 All-In-One InkJet...

Not finding what you are looking for?
Canon PIXMA MP150 All-In-One InkJet Printer Logo

1,255 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

1814 Answers

Corne Viljoen

Level 2 Expert

385 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...