Question about Medion PC Desktops

1 Answer

I am trying to fix a power problem on a medion laptop. When you press the power button, the power led lights up but nothing else happen. The laptop does not start. Any help.

Posted by on

  • ffosah Nov 23, 2008

    Hi!

    Thanks for your assistance.

    The problem is that when i press the button, the laptop does not start atall. The power LED just lights up. The boot process does not start atall. The problem could be with the mother board, you think?



    Can it be a power supply problem?

  • ffosah Nov 23, 2008

    Thanks jeff_olymp24. That was helpful. I will keep you posted

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 84 Answers

Hi,

When you turn on the system and NO BEEP sound it could be a problem with the system board that fails initialize and boot your system to the operating system. If you hear a beeping sound, you may need to reseat the memory card of your system.

Keep me posted.

Thanks.

Posted on Nov 23, 2008

  • Jeff R
    Jeff R Nov 23, 2008

    Hi,



    Yes, i am pretty sure that it is the motherboard. The system is getting power because when you press the power, it shows power.You are getting light on the power button, even the light won't stay longer.



    You may need to check it with your computer manufacturer for the a part replacement warranty.



    Keep me posted.



    Thanks

  • Jeff R
    Jeff R Nov 23, 2008

    Hi,



    You are welcome. Keep me posted if you need assistance.



    Thanks.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to fix a Medion m3 Composer 5200 that want start


VERY LITTLE DETAILS.
TRY WITH A OTHER MONITOR CAN ALSO BE A BROOKEN
VIDEOCARD.THIS IF YOU DON'T HAVE PICTURE.

Jul 11, 2014 | Medion M3 Composer 5200 PC Desktop

3 Answers

Medion PC


unplug the pc, wait a minute, plug it back in, what happens do you get any beeps? and this is a medion md-1704 correct?

Jun 08, 2008 | Medion MD-1704 PC Desktop

1 Answer

My medion desktop model pc mt 14 wont switch on from the mains


Whenyou plug in the power cord is there any lights whatsoever on the laptop, wherethe plug goes in or on the AC Adapter of the power cord?

When you press the power button do you hear fans running, hard drive spinning,lights on the computer, hear any beeps or lights constantly blinking, hear theDvD/CD drive click and the light on the drawer of the DvD/CD turn on for asecond or two? If so the laptop is trying to boot or may have booted, butthe screen is not showing for some reason.

Beep tones and blinking lights tells the technicians what is going on with thelaptop and why it is not booting. Most times it's a motherboard issuewhen you hear beeps or blinking lights continuous. Most times the problemis with the memory or Video Card. Count the Blinking Lights or Beeps and takenote of their pattern (1 Long or 1 Long followed by 2 Short).

Maybe your power cord is bad if you don't get anything to happen whatsoeverwhen you press the power button.

Maybe you have a Static Charge Buildup. Remove the Power Cord, then Pressand Hold the power button for 30 seconds. After 30 seconds plug the powercord back in and hit the power button to see if it boots.

Maybeyour memory is bad or the memory slot is bad.Removethe Power Cord, Open the Case and remove one of the memory chips. Set thechip aside then try rebooting the computer. If it boots, then you knowthe memory chip you set aside is bad so mark an x on it with an ink pen. If it fails to boot then move the chip to the next memory slot and tryrebooting. If it fails take the chip out and set it aside, then put theother chip in and try booting it in both slots. If it boots, just toverify that the chip set aside is bad, mark an x on it and put it into the openmemory chip slot and try booting.
Maybeyour power supply is bad. Sometimes there is enough power to make thepower light come on but not enough power to make the fan turn on or harddrive spin.

May 27, 2012 | Medion PC Desktops

1 Answer

What causes red led on starting?


Remove Power Cord then press and hold the power button for 30 seconds, then put the cord back in and try to start it.

When you press the Power Button are you hearing the fans run, the disk drive running, the cd drive click and the light on it comes on for a second or two?

Anything shows up on the LCD Screen?

If you press the power button and absolutely nothing is happening then you most likely have a bad power supply.

If you press the power button and you start hearing beep sounds or blinking lights in a continuous pattern (ex. 1 long followed by 2 short) then you have a motherboard issue. Those beep sounds and blinking lights tells the technician what is going on with the computer.

Mar 23, 2012 | Dell Dimension 4600 PC Desktop

2 Answers

The computer wont start at all, the orange light keeps blinking but when i push the power button, nothing happen any help would be great, thanks


Hello !!!


Normally Dimension 4600 models can be resolved just by doing the power drain. All you need to do is unplug all the cables behind the tower. Press & hold the power button for 1 minute. Now turn on the PC, it will work. If still the same kindly check the back LED's and let me know the status.

Jan 05, 2011 | Dell Dimension 4600 PC Desktop

1 Answer

My "hp pavilion a220n" won't power on. ... I was


Pull the power cord out and press the power button on the PC to drain the power for 10 seconds. Then plug the power cord back in and turn the computer on. If still does not work, then the power supply may be blown out and needs replacement.

Dec 23, 2010 | HP Pavilion a220n (DK218A#ABA) PC Desktop

1 Answer

My "hp pavilion a220n" won't


Check all wires for loose connections--- if the memory was wrong or something, it would still attempt to boot but stop during the POST and start to beep

Dec 23, 2010 | HP Pavilion a220n (DK218A#ABA) PC Desktop

1 Answer

DC5100 want start up


You need to replace the power supply, a fairly common problem.

Jul 17, 2009 | HP Compaq dc5100 PC Desktop

2 Answers

Medion desktop does not boot up, screen blank.


Had same sounding problem with a Medion PC myself. I don't know the cause exactly but the fix I have is this:
Switch off PC, switch off PSU and unplug the power cable from the PC. Then press the power button on your PC. You may see lights and fans start up for just a brief second. This is because there was still charge in the PSU's capacitors which we needed to clear out.

You can now plug the power cable back in, switch on the PSU and turn your PC on.

(I realise this is too late for the original poster's uses but others may find it useful when searching for a problem!)

May 18, 2009 | Medion MD1917 PC Desktop

2 Answers

E-Machines 2862 Dead On Power-Up


I believe that the front button is not connecting to the switch for the power supply. Also make sure all internal connections are secure. Sometimes the button breaks from behind so that it cannot contact the switch. Let me know if it helps. There are other solutions if you tried this one first. 

Nov 01, 2007 | E-Machines T2682 (000002965) PC Desktop

Not finding what you are looking for?
PC Desktops Logo

Related Topics:

181 people viewed this question

Ask a Question

Usually answered in minutes!

Top Medion PC Desktops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

isaac johny
isaac johny

Level 3 Expert

796 Answers

Are you a Medion PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...