Question about Rangemaster 110 (Gas) Kitchen Range

2 Answers

Oven will not respond

Oven flame ignites but will then not go to the next stage to get to the required temperature. Moving the gas control knob has no effect on the flame size .This is the right hand oven (Main Oven) on the 110 rangemaster cooker.

Posted by on

  • kaytethewitt May 11, 2010

    Oven flame ignites but will not to the next stage on the left hand oven of my 110 rangemaster cooker

  • Anonymous Mar 15, 2014

    the oven lights ok and the burner is clean. Won't go into full flame when it should. Remains in initial ignition flame



2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 833 Answers

The knob won't have any effect on the flame size.  The knob controls temperature.  If you're referring to the pilot light staying on and then the main flame not going on...that's another problem.  If the main flame will not go on, the assembly that controls the main flame is likely defective.  If the unit has a thermocouple, you might change it out first.  Sometimes, that's all that is needed and they're cheap.

Posted on Nov 26, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert whose answer got voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 188 Answers

Try pressing the oven regulator knob for a while 3 to 5 seconds on ignition its a safty thing so kids cannot gas themselves all cookers have them. you have to hold it in.

Posted on Mar 26, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

How do we start the Oven?

first question
have you turned the gas supply on?

Feb 02, 2018 | Kitchen Ranges

2 Answers

My wolf red ch-6-29-ft22l-lbl the oven has to b set at 425 to maintain 350 is this a tstat problem or gas valve issue ?. when set on 350 the flame cuts back at 275 and holds there..

it could be a thermostat problem as it controls the gas valve settings
As it is gas , call in the gas technician for the unit and have it diagnosed and fixed properly

Mar 07, 2016 | Kitchen Ranges

1 Answer

How to operate cggf3042kfg oven

This gas unit requires the burners to be ignited by holding the knob to ignite on the control panel until the flames arise. Then you can adjust the flames to higher, or lower, heights. Also, the oven should be a simple turn to the temperature wanted and wait approximately 20-30 minutes for a preheat to occur. If this does not happen you are possibly not receiving enough gas to the unit or you have an ignitor concern.

Dec 20, 2012 | Frigidaire Gallery 30" Self-Cleaning...

1 Answer


First, Change your technician.
There is a part that senses the heat from the ignited gas, usually quite close to the flame on the oven burner where it first ignites. It is called a generator and it produces about 1/3 of a volt, that holds the gas valve open only while the flame is lit, as a safety device. Pressing the knob at the time of ignition bypasses this by holding the valve open, after releasing the knob then the system relies on the presence of an oven flame to hold the valve open. Check the generator at the point it enters the oven control valve, is it loose? Maybe it is faulty or the oven valve is faulty. Any real technician can identify the the problem easily.

Oct 31, 2017 | Candy Washing Machines

1 Answer

Kenmore gas oven does not reach operating temperature

If your oven is 20 years old the temperature sensor system might no longer be accurate, if you have access to a temperature measuring device that can confirm that the oven is not reaching 350 then run it up and check that its not just your indicator light system. Some oven burners have air control and yours may have accumulated oven soil over the years. If your burner. Is behind a short wall like mine is, use a mirror and torch to check. A clean can bring things back to standard. Flame heat is from a good mix of. Gas and Air...

Dec 05, 2017 | Kenmore Ovens

1 Answer

How do i turn on a flavel milano 50 oven?. Never worked with gas stoves before and no manual in sight.

Turn on the gas knob for the oven (below the grill)
You will see an ignition button below the one that switches on the oven light,it is clearly marked.
Press in and hold the gas knob and press ignite button,you will see the safety bar flame light,when the safe to operate temperature is reached,the oven will stay lit after you release the gas supply knob.
Set oven temperate guage (gas mark 4 is approx electric 200 degrees,thats all there is too it
Hope that helps

Sep 05, 2009 | Ovens

1 Answer

Oven flame ignites but will then not increase to the larger size

when oven is switched on the flame ignites,butthe flame refuses to go tothe next stage to preheat the ovento the required setting

Nov 10, 2008 | Rangemaster 110 (Gas) Kitchen Range

1 Answer

Avanti DG241BS - oven will not stay on

There has to be a protection system in the burner assembly to cut the supply of gas to the burner if it does not light. For the case of an oven the supply must be cut off immediately if the burner and its pilot go out. For that gas control system to work the burner control must "recognize" with a sensor when the burner is lit and when it is not. Pushing the knob "in" momentarily on this model bypasses the protection system momentarily to allow a burner to be ignited in the first place. If releasing the knob extinguishes the flame the control system is not "seeing" the flame. I tried to find some detail info on you particular ignition system but to no avail so all I can offer is a general approach to these kinds of problems . You need to find and clean or replace the sensor used to detect a flame. It could be an optical one (doubt that) or a temperature flame sensor, a thermocouple sensor, or some other kind I haven't thought of. Fixing this problem involves first determining what kind of sensor it uses. A copy of a service manual for this model can help you determine that. Try to clean the flame detector, and if that doesn't work you have to replace it or the gas control assembly it is a part of. If you have a spark ignition and its not sparking when it should first clean it --carefully--. Spilled food can short them out. Unplug the range before doing this. The owners manual shows it to be under the top burners which can be removed for cleaning this.

Aug 07, 2007 | Avanti DG241BS Stainless Steel Gas Kitchen...

4 Answers

My gas oven flame


May 28, 2007 | Parkinson Cowan SG320 Gas Kitchen Range

Not finding what you are looking for?
Rangemaster 110 (Gas) Kitchen Range Logo

1,108 people viewed this question

Ask a Question

Usually answered in minutes!

Top Rangemaster Kitchen Ranges Experts

Ismael Rodriguez...

Level 2 Expert

171 Answers

Paul Carew

Level 3 Expert

3162 Answers

Charles T Nevin
Charles T Nevin

Level 3 Expert

4070 Answers

Are you a Rangemaster Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides