Question about Motorola Mobility RAZR V3c Cellular Phone
I have a Motorola Razr V3c. I got about two years ago. i am in an extented network area. my phone is freezing and then resetting every few of seconds. It doesn't turn completely off just freezes and then returns to the main screen. If I open it to use it, it will allow me to make a couple of key presses before it freezes and resets. It hasn't been getting any incoming calls and it will let me call out only before it resets which isn't long enough to even hear a ring on the other end. i noticed that when you can actually use the keypad, the keypad lights up and the screen darkens like when your battery save kicks in (also the battery symbol flashes and the no service symbol appears, when on the charger). then there will be a flash and the keypad lights go out, there is no signal (the battery status symbol DISAPPEARS and the 1X appears, when on the charger), at this point the key pad and all the rest of the buttons are non responsive. a couple of seconds later the screen will brighten up for a few seconds (still not having a battery symbol and still having the 1X, when on the charger). then the keypad will light up and then the screen will get darker again (the battery symbol starts flashing, the 1X disappears, and the no service symbol appears again, when on the charger) at which point it will be responsive again. AND REPEAT. when not on the charger, the battery symbol continually stays on but the rest of the descriptions above stay the same. Any suggestions?????
Your firmware is corrupt, the only way to revive your phone is re
flashing it.Its hard to do, and by doing it wrong may damage your
phone. To safely retrieve your phone is let the experts do it or go to
a near cell repair shop and let them help you out,
if you want to do it your self, try this
first you need is a RSD lite program or flash and back-up to flash or reformat your Motorola,
to enter the bootloader
hold * then the # then power button, your phone will boot to bootloader, and you will see there the flash program of your phone,
start the program rsd lite or flash and backup
then connect it to your computer VIA usb, automatically the program will detect your phone,
i prefer that you first buck up your firmware by using F&B (Flash and backup) then use RSD lite to flash your Motorola,
RSD lite its much easier to use than F&B, but for safety backup first your firmware,
Posted on Nov 25, 2008
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Jul 18, 2011 | Motorola Mobility RAZR V3c Cellular Phone
Jan 05, 2009 | Motorola Mobility RAZR V3c Cellular Phone
Dec 27, 2008 | Motorola Mobility RAZR V3c Cellular Phone
196 people viewed this question
Usually answered in minutes!