Question about Belkin (F5D7230-4) Router (587009)

1 Answer

Wireless connection I can't seem to open any page in the internet through my laptop using my Belkin wireless router. I tried to configure but I guess not successful. I am using my pc connected to the wirelss router via cable. How do I make it work for my laptop? cannot connect from laptop. pc says networks available and it shows my network but says i cannot connect and i have full signal. had a storm the other day and now the internet on the router doesnt work, but when i hook it up via cable i have access. i also have very good conection with the router, it just seems to be the internet, i tried reseting every thing, making sure all the plugs were in correctly. i don't know what to do???

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,061 Answers

Http://www.belkin.com/support/article/?lid=en&pid=F5D7230-4&aid=1564&scid=0 reset to factory defaults and reset up your laptop All info at factory website here at this web address.RICHARDM69

Posted on Dec 06, 2008

2 Suggested Answers

neoranjit
  • 310 Answers

SOURCE: wireless connection

Go to your PC.

Start --> Run -- > cmd -->ipconfig. Chk the ip address in the default gateway. From ur laptop. chk if you can ping that ip. To ping -- Start --> Run --> cmd -- > ping xxx.xxx.xx.x.

If you cant ping it, just means there is no communicaition betwen the router and the computer. Meanwhile, make sure that the laptop is close enough to the router and you have a good signal strength.

- Ranjit
ranjit@supportminds.com

Posted on Nov 16, 2007

jamesmac
  • 71 Answers

SOURCE: wireless connection

Access the routers admin page with the hardwired pc.  http://*gateway*  right click network status on pc and get gateway.  Google the model you have for the default passwords.  Setup your wifi security then do the same to your laptop and attempt to connect again.  Bad settings somewhere.
James Mac

Posted on Sep 09, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My belkin router is not connecting to the second computer it is not on the list to connect to internet


Connect a LAN cable from Belkin to your laptop/computer's LAN port, open a browser on your laptop/computer and enter the Belkin's configuration URL. http://192.168.2.1
The default PW = blank (just press Enter) You can now change the default admin password.
You can now configure the wireless settings to protect your wireless network and Internet from unauthorized access. Now configure the wireless card in your computer/laptop with the router's wireless settings. To secure your wireless network from unauthorized access, please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Mar 27, 2013 | Belkin Routers

1 Answer

Belkin N1 Wireless ADSL2 Model # F5D8631-4 Router router default address (192.168.2.1) is not opening, even i have reset the router


Connect a LAN cable from Belkin to your laptop/computer's LAN port, open a browser on your laptop/computer and enter the Belkin's configuration URL. http://192.168.2.1
The default PW = blank (just press Enter) You can now change the default admin password.
You can now configure the wireless settings to protect your wireless network and Internet from unauthorized access. Now configure the wireless card in your computer/laptop with the router's wireless settings. To secure your wireless network from unauthorized access, please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Dec 09, 2012 | Belkin Routers

1 Answer

Problem with wireless router - Belkin F6D4230 / Cannot connect to the internet.


Connect a LAN cable from Belkin to your laptop/computer's LAN port, open a browser on your laptop/computer and enter the Belkin's configuration URL. http://192.168.2.1
The default PW = blank (just press Enter) You can now change the default admin password.
You can now configure the wireless settings. Now configure the wireless card in your computer/laptop with the router's wireless settings. To secure your wireless network from unauthorized access, please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Sep 07, 2012 | Belkin Routers

1 Answer

Can u tell me how to get my wireless router connected to the internet. I keeps telling me there is no internet connection


Connect a LAN cable from Belkin to your laptop/computer'sLAN port, open a browser on your laptop/computer and enter the Belkin'sconfiguration URL. http://192.168.2.1
The default PW = blank (just press Enter) You can now change the default password.
You can now configure the wireless settings. Now configure the wireless card in your computer/laptop withthe router's wireless settings. Connect a LAN cable from your DSL or cable modem to the Belkin's WAN/Internet port.

To secure your wireless network from unauthorized access,please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

May 07, 2011 | Belkin Wireless G Plus MIMO (F5D9230-4)...

2 Answers

MY ROUTER KEEPS LOSING CONNECTION


Hello fieldon68, & to all the rest with the same problem.

There are many things that could be wrong, but intermittant discounnects sounds very much like a interverance from another wireless device. (ie phone, cell, etc)

To try to address this issue, follow the steps below:
Note : The steps below are applicable only for Belkin routers.
  1. Open an Internet Explorer window on your computer and type in http://192.168.2.1 in the address bar. This will take you to the Belkin router's web based configuration page. If you are not able to open the page click here.
  2. You will get a login page. Leave the password blank. Click Submit ( unless you created a password, then enter that).
  3. On the left side of the page, click Channel and SSID below Wireless .
  4. The wireless channel on the Belkin router is set to Auto by defualt. Change the wireless to a static channel. Click Apply Changes .
  5. Click Logout in the top right hand corner.
Note: The wireless card in the computer will automatically detect the change in channel number on the router and will update the channel on the card.
CauseYou get disconnected wirelessly mainly due to an environmental interference. When the wireless channel is set to auto, the router will cycle to though channels when it detects significant interference. When the router changes channel the wireless connection will reset itself and disconnect all wireless clients connected to the router. Wireless signals are prone to interference from cordless phones and electrical appliances (e.g., vacuum cleaners, microwave ovens). This is one of the more popular reasons Belkin wireless connections can drop. Good Luck Mark P.S. Please leave a rating.

Jan 02, 2009 | Belkin N Wireless Modem-Router F5D8633au4A

3 Answers

Wireless connection


Access the routers admin page with the hardwired pc.  http://*gateway*  right click network status on pc and get gateway.  Google the model you have for the default passwords.  Setup your wifi security then do the same to your laptop and attempt to connect again.  Bad settings somewhere.
James Mac

Sep 09, 2008 | Belkin Wireless G Plus MIMO (F5D9230-4)...

1 Answer

Encryption problems


You just have to enter the WEP encryption that you have configured on the Belkin router to reconnect your laptop back to the wireless router. To verify the WEP of the router:

  • Open an Internet Explorer window on your computer and type in http://192.168.2.1 in the address bar. This will take you to the Belkin router's web based configuration page. If you are not able to open the page click here.
  • You will get a login page. Leave the password blank. Click Submit .
  • On the left side of the page, click Wireless Security or Security below Wireless .
  • Take note of the WEP key.
  • Click Logout in the top right hand corner.
  • Sep 05, 2008 | Belkin Routers

    1 Answer

    Wireless Router


    Greetings...

    Here are the steps to hopefully get you reconnected...

    SymptomNot able to connect to the router/AP wirelessly, or intermittent wireless connection.
    ResolutionTo address this issue, follow the steps below:
    Note : The steps below are applicable only for Belkin routers.
    1. Open an Internet Explorer window on your computer and type in http://192.168.2.1 in the address bar. This will take you to the Belkin router's web based configuration page. If you are not able to open the page click here.
    2. You will get a login page. Leave the password blank. Click Submit .
    3. On the left side of the page, click Channel and SSID below Wireless .
    4. The wireless channel on the Belkin router is set to Auto by defualt. Change the wireless to a static channel. Click Apply Changes .
    5. Click Logout in the top right hand corner.
    Note: The wireless card in the computer will automatically detect the change in channel number on the router and will update the channel on the card.

    Have a great day...

    Ed

    May 28, 2008 | Belkin (F5D7230-4) Router (587009)

    1 Answer

    Router disconnection


    1. Open an Internet Explorer window on your computer and type in http://192.168.2.1 in the address bar. This will take you to the Belkin router's web based configuration page. If you are not able to open the page click here.
    2. You will get a login page. Leave the password blank. Click Submit .
    3. On the left side of the page, click Channel and SSID below Wireless .
    4. The wireless channel on the Belkin router is set to Auto by defualt. Change the wireless to a static channel like 11. Click Apply Changes .
    5. Click Logout in the top right hand corner.
    6.Then reconnect to your wireless network.

    May 17, 2008 | Belkin (F5D7230-4) Router (587009)

    1 Answer

    Wireless connection


    Go to your PC.

    Start --> Run -- > cmd -->ipconfig. Chk the ip address in the default gateway. From ur laptop. chk if you can ping that ip. To ping -- Start --> Run --> cmd -- > ping xxx.xxx.xx.x.

    If you cant ping it, just means there is no communicaition betwen the router and the computer. Meanwhile, make sure that the laptop is close enough to the router and you have a good signal strength.

    - Ranjit
    ranjit@supportminds.com

    Nov 16, 2007 | Belkin (F5D6230-3) Wireless Router

    Not finding what you are looking for?
    Belkin (F5D7230-4) Router (587009) Logo

    70 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Belkin Routers Experts

    Les Dickinson
    Les Dickinson

    Level 3 Expert

    18304 Answers

    steve morris
    steve morris

    Level 3 Expert

    1673 Answers

    Christopher Thrash

    Level 3 Expert

    425 Answers

    Are you a Belkin Router Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...