Question about Projection Televisions

1 Answer

Phillips lcd different colors on screen - Projection Televisions

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 291 Answers

Unplug the tv from main electric scouece for 10 minutes.then again plug in and check out.this mostly resets the tv if any minor problem.but if that does not resolves your problem.
then on the main board check out for

1)burned --bulged up or leaked capacitor
2)or ICs getting overheated up .

Posted on Nov 23, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a phillips rear projection tv model no 55PP8620/79. Its showing a a red haze and poor picture quality. How do I fix this?


If the red haze is not convergence---that requires parts.

The set has three picture tubes---with set unplugged and back cover removed clean the three large lens that are topside---as for the red haze a quick way to know what is wrong is with set on turn the color to zero----what color is the screen? Should be black and white--if red to some degree tracking or screen controls may need adjusting inside the set---Yellow picture in that situation is a different issue.

Jun 05, 2012 | Philips Projection Televisions

1 Answer

My rear projection TV has color spots in the picture, most noticeable on light color picture


What is the make and model of TV. If it is a Panasonic that has different colored spots such as pink, blue etc. Then you need t6o contact Panasonic as this is a memory reset that they have to perform on the LCD driver board. Other brands of LCD projection sets that have spots that appear all over the screen mostly on white back rounds are almost always dust that has settled on the LCD panels. This requires a technician to clean the LCD panels if possible.

Dec 17, 2009 | Hitachi Projection Televisions

1 Answer

My phillips tv has a green line at the bottom


This is a very common failure on Projection sets. Its called a convergence problem.
You may have one or more of the following symptoms.
Screen looks 3D
Colors don't line up
One or more colors can't be adjusted when using the convergence menu.
Screen is bowed or warped.
No Audio / No Video - Makes Chirping Sounds
You can see some examples and find a fix here...

http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Sep 26, 2009 | Philips 60PW9363 60" Rear Projection...

1 Answer

I have a Phillips rear projection 60 color lamps off focus


You can't adjust this. Your convergence amplifiers are bad and must be replaced. $250-$350 by repair shop.

Jul 08, 2009 | Projection Televisions

1 Answer

Phillips 52 in big screen screen has a red tinge other colors come though but not very bright


Replace the coolant in the CRts a very common problem with phillips. The colors will get very dim and red will become domintae as red seldom needs replacement where as blue and green get congealed and the set will get dim hard to focus and you will see a glowing around green and blue objects. Heres a link to the coolant kit for a phillips which contains the replacement coolant and step by step instructions on CD with pictures on how to replace the coolant.
http://servicemanuals.vstore.ca/product_info.php/pName/phillips-crt-coolant-replacement-kit/cName/repair-kits

May 06, 2009 | Projection Televisions

1 Answer

Concave looking screen and double lettering, color aweful


you need the following comvergence repair kit it comes with the replacement ICs and resistors plus step by step instructions on how to do the repair. Heres the kit for your model.
http://servicemanuals.vstore.ca/product_info.php/pName/phillips-dptv-305-dptv345-convergence-repair-kit/cName/convergence-repair-kits

Apr 20, 2009 | Philips Magnavox 9P6034C 60" Rear...

1 Answer

Panasonic PT50LC14 Rear projection LCD - too much green


Had the same problem today. Thought is was my bulb. Replaced it but still had the color problem. Replaced the cables between cable box and TV and no more problem!

Jan 22, 2009 | Panasonic PT-50LC14 50" Rear Projection...

1 Answer

I have a 2002 Phillips Big Screen. Model#50P8341AA and Serial# 72874764. It has been losing color, sometimes you can see a color but it is a lighter color and sometimes the screen almost looks like a...


A common fault with phillips is the CRT coolant needs to be replaced about every 5 to 6 years. If you need more info please respond to this same post

Jul 31, 2008 | Philips Projection Televisions

1 Answer

Red , Green And Blue.


Heres the best way to set a phillips screen controls. Go into the picture controls and set picture or contrast to roughly 75%, then set brightness to 50% and then set the color level completely off. Then adjust the screen with the 3 color controls untill you recieve the best black and white picture as possible. If you are unable to achieve a good black and white picture change the coolant in the green and blue tubes. But if you can get a good black and white picture stop there then turn your color level back up and the picture should be correct. Let me know if you need further assistance.

May 22, 2008 | Projection Televisions

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

61037 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...