Question about ViewSonic VG920 19" LCD Monitor

1 Answer

No Power From the first day I rec'd this monitor, it would power off during use, stay off for a few seconds, and then come back on. Over time (about 1 yr.) the time it would remain off got longer and longer. Now it won't power on at all. I assume there is a problem with the power supply and have no problem attempting to fix it myself. All I need is a confirmation that this is, indeed, the problem and some advice on how I go about fixing it.

Posted by on

  • SOLITUDEbwk Apr 14, 2009

    How do you disassemble this thing, I've taken off all the visible screws but can't figure out how it pops apart.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 9,098 Answers

The main things to look for are bulging or leaking electrolytic capacitors, bad connections, shorted output transistors, and defective output transformers.

Posted on Jan 12, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Polyview V17E monitor looses power at irregular times


Check your power saver settings

Start - Control Panel - Power

May 08, 2010 | Polyview V17E 17" LCD Flat Panel Monitor

1 Answer

Hello, I have a ViewSonic N1700w. I have hooked it up correctly(all drivers downloaded, proper connections, etc.). When I turn it on the power led blinks until there is video or graphics to display. When...


it sounds like the inverter was defective, the monitor will be fine for few seconds then go off but power light still stay on with Green. You can contact with manufacturer for repair service if it still under warranty.

Mar 22, 2010 | Computers & Internet

1 Answer

M1991 screen stays black, little light is yellow


The fault is a back-light problem and the fault could be a faulty inverter board or a faulty CCFL lamp.
For service, parts and DIY info check out LCD Parts WEB site, please click on this link :-
www.lcdparts.net

Mar 15, 2010 | Dell Computers & Internet

1 Answer

Gateway monitor FPD1975W won't display


Same problem - unplug both computer and monitor - hold power button for monitor for 15-30 seconds...then power it back on and then power on the computer. Seems from other sites there is a power issue with the monitor - this worked for me.

May 23, 2009 | Gateway FPD1975W 19" LCD Monitor

1 Answer

MGC monitor goes blank after about 10 seconds of use


Fixya.com doesn't have a repair centre. Call your manufacturer for the closest approved repairer near you.

Apr 22, 2009 | Computers & Internet

1 Answer

Start button not working standby light staying


The switch is for 'REC' 'Standby' and "PLAY".
If you leave it switched to "Play" and pull the plug and push it in to the wall receptacle (mains) it should start playing after a few seconds delay. The same for "REC". You use a timer unit on the power cord for those.
If you have the switch in the middle position and plugged-in, you should have a tiny Red LED illuminated. Push "Power" and it should start-up and be ready to use in a matter of a few seconds.

Feb 22, 2009 | Sony MDS-JE520 Mini Disc Player

1 Answer

Problem LCD screen stays white bright after switch button is OFF ??


Some capacitors need to be replaced,which would have burnt out due to power fluctuations

May 12, 2007 | Samsung SyncMaster 710N 17 in. Flat Panel...

Not finding what you are looking for?
ViewSonic VG920 19" LCD Monitor Logo

Related Topics:

212 people viewed this question

Ask a Question

Usually answered in minutes!

Top ViewSonic Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18425 Answers

Cindy Wells

Level 3 Expert

5527 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a ViewSonic Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...