Hello my little brother just got a second hand comp but the sound doesnt work and it has a few cables that came with it but not connected i was wondering if you could send me something thatll tell me where to plug everything into
An expert who has achieved level 3 by getting 1000 points
An expert that got 10 achievements.
An expert that got 5 achievements.
An expert whose answer got voted for 500 times.
Re: motherboard connections asus p4s800 mx se
Here's a link to the manual for that motherboard: http://dlcdnet.asus.com/pub/ASUS/mb/sock478/p4s800-mx%20se/e1918_p4s800-mx_se.pdf
This will show you where all the connections go. Also make sure onboard sound is enabled in the BIOS setup, and that the drivers have been installed. You can check WIndows device manager to see if any warnings show up about problem devices.
If you need to download any drivers or need more information about the board, here's a link to the Asus support page: http://support.asus.com/faq/faq.aspx
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hello,This issue may becaused by poor connection. Check to see if all interface connection cables arein the printer. If the printer doesn't establish good connection with thecomputer print quality will decrease.Second thing you can check are thesettings on the computer. Are they matching with settings in Brother MFC-9840CWD.This is issue is not caused from the toner cartridge or drum unit.
firstly, hold down your home button (circle one on front) and you power button ( at top) for a few seconds and see if the phone flashes off then back to the apple logo and should hopefully load to home screen.
If that doesnt work, load up itunes on your comp and insert USB cable - not phone just yet- then on the phone hold the power button until phone powers off, then hold down the home button (circle one) for a few seconds then connect your USB cable and you should see what looks like itunes symbol and USB on the phone screen you should then receive a message on itunes saying that a phone has been detected in recovery mode then continue through itunes to restore your iphone (as new as your old software will cause the problem again) . This should solve your problem, although if you have had your phone "jail broken" then it may have affected the handset and you'll have trouble gettin it working again if at all.
*years is quite some time. Have you been successful at turning the engine over by hand? You may have to WD40 all the cylinders to help the rings a little, then hand turn the engine a few times to loosen things up. If a fresh batery won't turn it, it needs some help. Good Luck, Ned
have youtryehave you tried going to menu options and turning off the power save you might try changing the scart cable any interferance will cause the tv to turn of. my little boy often knocks the scart lead on my set an the tv turns itself off when he does this ,. hope this helps good luck
I would love to help you here, but that might be either very easy or tricky. It's hard to say what the reason is - it could be everything from power not working to SSID not broadcasted.
Let's try the obvious first: You say that LED 1 and Internet are lit. Do you mean "Ethernet 1"? If the Power light is not on, check the power cable or power cycle the router, by unplugging the power for about 10 seconds.
To ensure that all components are getting the correct settings handed over: Turn the computer and modem off as well. Then plug the power back into the modem first, then connect the power back to the router. Then restart your PC.
Connect your PC to the router with an Ethernet cable. This way you find out if the wired part of the router is working. Do you get an IP address? Can you access the Internet?
If that is working, log into your router and check the wireless settings: Is wireless turned on? Are you broadcasting your SSID? Do the wireless security settings make sense?
Let me know what you find out. I send this as a "Solution", for the simple reason that I can find it again. If you have any more questions, just come back here and leave a comment - I'm happy to help.
When you disconnect an Ethernet cable from the printer, wireless network will be enabled. On the other hand, when the Ethernet cable is connected to the printer, wired network is enabled.
If you press the Go button for approx. 13 seconds,
the network setting page will be printed out. Then release the Go
button, wired network will be switched to wireless network even if the
Ethernet cable is still connected.
You can then verify your network settings and change between wired and wireless setups.
in the manual it has to be specified if certain buttons have to be pressed and hold on it a few seconds on power up to reset it ...if not ..try to keep the on /reset ..button pressed down when you power it up for 20 seconds... do not be worried if it make a beep sound... before ya do that completely remove any cable connection from it ....and after that replug it just with the power cord ...
-- who is your internet service provider -- what is the operating system of your computer? -- is this working fine before or is this a brand new router
you may try this and see if this help solve your problem. make sure your computer is directly connected to the router
Step 1: Shutdown the computer. Step 2: reset the router while power on then Unplug the router’s power cable. Step 3: Unplug the Broadband modem’s power cable and wait for 30 seconds. Step 4: Plug in the Broadband modem’s power cable and wait for its lights to appear stable. Step 5: Plug in the router's power cable once the modem’s lights appear stable. Step 6: Power on the computer on and configure the router settings Step 7: test the Internet connection.
if this still didnot work, upgrade the firmware of your router
configuring the router settings will depends who is your provider. if your isp is dsl you need to configure your ISP username and password on the router. if your router is a cable no need to change any settings on the router. it should automatically work
if you are still having trouble configuring your device, try to call supportrix and use supportcall as your promo code for 1 free technical support.
if AMP turns on and no sound , check the inernal fuses that protect the output from overload , in most cases this fuses act like a cicuit breaker , they set back on again in a few seconds. hope this helps